FCC ID 2ASMP-BIT040B
E-Bike Location and Communications Module
by Lyft, Inc.
Grantee Code: 2ASMP Product Code: BIT040B
Latest application date: 2021-04-26
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 13.56 MHz | Original Equipment | 2021-04-26 |
| 2402-2480 MHz | Original Equipment | 2021-04-26 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User_manual | Users Manual | 2021-10-23 | PDF 139.6 KB |
| user_manual | Users Manual | 2021-10-23 | PDF 139.6 KB |
| Int_Photos | Internal Photos | 2021-10-23 | PDF 1.5 MB |
| Internal Photos | Internal Photos | 2021-10-23 | PDF 1.5 MB |
| Ext_Photos | External Photos | 2021-10-23 | PDF 1.3 MB |
| Label_and_Label_Location | ID Label/Location Info | 2021-04-26 | PDF 1,023.2 KB |
| Test_Setup_Photos | Test Setup Photos | 2021-10-23 | PDF 1.2 MB |
| FCC 15.225 | Test Report | 2021-04-26 | PDF 1.4 MB |
| FCC 15.247 | Test Report | 2021-04-26 | PDF 2.1 MB |
| Agent_Authorization | Cover Letter(s) | 2021-04-26 | PDF 254.8 KB |
| FCC_Long_Term_Only_Confidentiality_Request | Cover Letter(s) | 2021-04-26 | PDF 255.8 KB |
| FCC_Short_&_Long_Term_Confidentiality_Request | Cover Letter(s) | 2021-04-26 | PDF 255.8 KB |
| MPE | RF Exposure Info | 2021-04-26 | PDF 292.2 KB |
| Block_Diagram Metadata only | Block Diagram | PDF 49.9 KB | |
| SCH Metadata only | Schematics | PDF 2.9 MB | |
| Schematic Metadata only | Schematics | PDF 2.9 MB | |
| Operation-Description Metadata only | Operational Description | PDF 966.5 KB | |
| operation_description Metadata only | Operational Description | PDF 966.5 KB | |
| BOM Metadata only | Parts List/Tune Up Info | PDF 112.6 KB |
Application Information
| Application ID | zGkbXVGeYQYVjxvYPxWR5Q== |
|---|---|
| Final Action Date | 2021-04-26 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0028286235 |
| Model | BIT040B |
| Frequency Range | 13.56 MHz |
| Equipment Class | DXX - Part 15 Low Power Communication Device Transmitter |
| Device Description | E-Bike Location and Communications Module |
| Responsible Party | Nik Hatzis, Director of Micromobility, Safety and Compliance, nhatzis@lyft.com  , 855-865-9553 |
| Technical Contact | Lyft, Inc., nhatzis@lyft.com |
| Test Firm | Gordon Hurst, MiCOM Labs, gordon_hurst@micomlabs.com  , 925-462-0304 |
| TCB Email | certification@micomlabs.com |
| TCB Scope | A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 10/23/2021 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| zGkbXVGeYQYVjxvYPxWR5Q== | 2021-04-26 | Original Equipment |
| n6TUA56S7TJtp5RX+3XYhQ== | 2021-04-26 | Original Equipment |
Grants
TCB Grant - Application zGkbXVGeYQYVjxvYPxWR5Q==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 04/26/2021 Application Dated: 04/26/2021 |
| Lyft, Inc. |
| 185 Berry St |
| Suite 5000 |
| San Francisco, CA 94107 |
| Attention: Nik Hatzis , Director of Micromobility, Safety and Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ASMP-BIT040B |
| Name of Grantee: | Lyft, Inc. |
| Equipment Class: | Part 15 Low Power Communication Device Transmitter |
| Notes: | E-Bike Location and Communications Module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 13.56 - 13.56 |
| The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application zGkbXVGeYQYVjxvYPxWR5Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Lyft, Inc. 185 Berry St Suite 5000 San Francisco, CA 94107 United States |
Date of Grant: 04/26/2021 Application Dated: 04/26/2021 |
| Attention: Nik Hatzis , Director of Micromobility, Safety and Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ASMP-BIT040B |
| Name of Grantee: | Lyft, Inc. |
| Equipment Class: | Part 15 Low Power Communication Device Transmitter |
| Notes: | E-Bike Location and Communications Module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 13.56 - 13.56 |
| The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 04/26/2021 Application Dated: 04/26/2021 |
| Lyft, Inc. |
| 185 Berry St |
| Suite 5000 |
| San Francisco, CA 94107 |
| Attention: Nik Hatzis , Director of Micromobility, Safety and Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ASMP-BIT040B |
| Name of Grantee: | Lyft, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | E-Bike Location and Communications Module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.005 |
| Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application n6TUA56S7TJtp5RX+3XYhQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Lyft, Inc. 185 Berry St Suite 5000 San Francisco, CA 94107 United States |
Date of Grant: 04/26/2021 Application Dated: 04/26/2021 |
| Attention: Nik Hatzis , Director of Micromobility, Safety and Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ASMP-BIT040B |
| Name of Grantee: | Lyft, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | E-Bike Location and Communications Module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.005 |
| Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |