FCC ID 2ASRT-NPX535

Multi function projector

by Screeneo Innovation SA

Grantee Code: 2ASRT   Product Code: NPX535
Latest application date: 2021-08-19

FCC ID Device Details

FCC ID2ASRT-NPX535
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2ASRT
Product CodeNPX535
Applicant BusinessScreeneo Innovation SA 🇨🇭
Related Domains screeneo.com
Equipment ClassMulti function projector
Test FirmShenzhen LCS Compliance Testing Laboratory Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2021-08-19
2402-2480 MHzOriginal Equipment2021-08-18

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2021-08-19PDF 4.8 MB
Internal PhotosInternal Photos2021-08-19PDF 884.8 KB
External PhotosExternal Photos2021-08-19PDF 513 KB
Label and locationID Label/Location Info2021-08-19PDF 69.3 KB
Test Setup PhotosTest Setup Photos2021-08-19PDF 295.2 KB
Appendix B Test Data for 2.4GWIFI_part 1Test Report2021-08-19PDF 3.9 MB
Appendix B Test Data for 2.4GWIFI_part 2Test Report2021-08-19PDF 3.3 MB
Test Report-DTS 2.4GWLANTest Report2021-08-19PDF 1.3 MB
Appendix A Test Data for BTTest Report2021-08-18PDF 5.6 MB
Test Report-DSSTest Report2021-08-18PDF 1.2 MB
FCC Confidentiality request letterCover Letter(s)2021-08-19PDF 108.3 KB
FCC Declaration of Disable WLAN Channel 12 and 13Cover Letter(s)2021-08-19PDF 114.4 KB
FCC POACover Letter(s)2021-08-19PDF 68.5 KB
RF Exposure-MPERF Exposure Info2021-08-19PDF 388.4 KB
Block Diagram Metadata onlyBlock DiagramPDF 56.4 KB
Schematic Metadata onlySchematicsPDF 325.4 KB
Declaration concerning Antenna Specification Metadata onlyOperational DescriptionPDF 74 KB
Operation Description Metadata onlyOperational DescriptionPDF 525.6 KB

Application Information

Application IDbE0aUy5kXBd5Pql3Sm6z2w==
Final Action Date2021-08-19
Application PurposeOriginal Equipment
Applicant FRN0028331841
ModelNPX535
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionMulti function projector
Responsible PartyDan Mamane, CEO & President, philips.projector.eu@screeneo.com , 0041 21 821 55 00
Test FirmGavin Liang, Shenzhen LCS Compliance Testing Laboratory Ltd., gavin.liang@lcs-cert.com , 0755-82591330
TCB Emailjoergkusig@eurofins.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput Power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
bE0aUy5kXBd5Pql3Sm6z2w==2021-08-19Original Equipment
e9rSaNfbmt+SurRYHxPbsA==2021-08-18Original Equipment

Equipment Authorization

FrequencyOutputRules
2402-2480 MHz0.001700015C
2412-2462 MHz0.020200015C

Grants

TCB Grant - Application e9rSaNfbmt+SurRYHxPbsA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany
Date of Grant: 08/18/2021

Application Dated: 08/18/2021
Screeneo Innovation SA
Route de Lully 5C
Tolochenaz, 1131
Switzerland
 
Attention: Dan Mamane , CEO & President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ASRT-NPX535
Name of Grantee:  Screeneo Innovation SA
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Multi function projector
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0017  

Output Power listed is peak conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

EAS Grant - Application e9rSaNfbmt+SurRYHxPbsA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Screeneo Innovation SA
Route de Lully 5C
Tolochenaz, 1131
Switzerland
  Date of Grant: 08/18/2021

Application Dated: 08/18/2021
 
Attention: Dan Mamane , CEO & President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ASRT-NPX535
Name of Grantee:  Screeneo Innovation SA
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Multi function projector
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0017  

Output Power listed is peak conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.



TCB Grant - Application bE0aUy5kXBd5Pql3Sm6z2w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany
Date of Grant: 08/19/2021

Application Dated: 08/18/2021
Screeneo Innovation SA
Route de Lully 5C
Tolochenaz, 1131
Switzerland
 
Attention: Dan Mamane , CEO & President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ASRT-NPX535
Name of Grantee:  Screeneo Innovation SA
Equipment Class: Digital Transmission System
Notes: Multi function projector
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.0202  

Output Power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

EAS Grant - Application bE0aUy5kXBd5Pql3Sm6z2w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Screeneo Innovation SA
Route de Lully 5C
Tolochenaz, 1131
Switzerland
  Date of Grant: 08/19/2021

Application Dated: 08/18/2021
 
Attention: Dan Mamane , CEO & President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ASRT-NPX535
Name of Grantee:  Screeneo Innovation SA
Equipment Class: Digital Transmission System
Notes: Multi function projector
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.0202  

Output Power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.



Mail To: