FCC ID 2ASUD-CAPRIH100

Digital Media Receiver

by Elettromedia s.p.a.

Grantee Code: 2ASUD   Product Code: CAPRIH100
Latest application date: 2024-03-05

FCC ID Device Details

FCC ID2ASUD-CAPRIH100
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2ASUD
Product CodeCAPRIH100
Applicant BusinessElettromedia s.p.a. 🇮🇹
Related Domains elettromedia.it
Equipment ClassDigital Media Receiver
Test FirmEST Technology Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2024-03-05
2402-2480 MHzOriginal Equipment2024-03-05

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2024-03-05PDF 1.5 MB
Internal PhotoInternal Photos2024-03-05PDF 2.5 MB
External PhotoExternal Photos2024-03-05PDF 694.4 KB
External PhotoExternal Photos2024-03-05PDF 488.4 KB
LabelID Label/Location Info2024-03-05PDF 488.6 KB
Label LocationID Label/Location Info2024-03-05PDF 160.4 KB
Test Setup PhotoTest Setup Photos2024-03-05PDF 424.3 KB
Antenna specTest Report2024-03-05PDF 763 KB
Antenna specTest Report2024-03-05PDF 751.7 KB
Test report part 1Test Report2024-03-05PDF 5.2 MB
Test report part 1Test Report2024-03-05PDF 5.6 MB
Test report part 2Test Report2024-03-05PDF 4.5 MB
Test report part 2Test Report2024-03-05PDF 5.5 MB
section 2.911(d)(5)(i) filingAttestation Statements2024-03-05PDF 31.9 KB
section 2.911(d)(5)(ii) filingAttestation Statements2024-03-05PDF 26.4 KB
section 2.911(d)(7) filingAttestation Statements2024-03-05PDF 301 KB
Authorization Letter formCover Letter(s)2024-03-05PDF 47.1 KB
Confidential LetterCover Letter(s)2024-03-05PDF 33.3 KB
Model declarationCover Letter(s)2024-03-05PDF 21.2 KB
RF Exposure InfoRF Exposure Info2024-03-05PDF 163.2 KB
Block Diagram Metadata onlyBlock DiagramPDF 730.8 KB
Schematics Metadata onlySchematicsPDF 1.2 MB
Operational Description Metadata onlyOperational DescriptionPDF 282.1 KB

Application Information

Application IDmuEb5OtVQizE1YDbqZJmaQ==
Final Action Date2024-03-05
Application PurposeOriginal Equipment
Applicant FRN0028345213
ModelCAPRIH100
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionDigital Media Receiver
Responsible PartyMaurizio Riccobelli, CEO, maurizio.riccobelli@elettromedia.it , 39-0733-870-820
Test FirmIceman Hu, EST Technology Co., Ltd., iceman.hu@gdest.cn , +86 0769-83081888
TCB Emaildarial@compliancetesting.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
muEb5OtVQizE1YDbqZJmaQ==2024-03-05Original Equipment
ed/G43yye37tD+eMumxHRQ==2024-03-05Original Equipment

Equipment Authorization

FrequencyOutputRules
2402-2480 MHz0.017179115C
2402-2480 MHz0.001465515C

Grants

TCB Grant - Application muEb5OtVQizE1YDbqZJmaQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Compliance Testing, LLC
1724 S. Nevada Way
Mesa, AZ 85204
Date of Grant: 03/05/2024

Application Dated: 03/05/2024
Elettromedia s.p.a.
62018
Potenza Picena, 62018
Italy
 
Attention: Maurizio Riccobelli , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ASUD-CAPRIH100
Name of Grantee:  Elettromedia s.p.a.
Equipment Class: Digital Transmission System
Notes: Digital Media Receiver
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0014655  

Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application muEb5OtVQizE1YDbqZJmaQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Elettromedia s.p.a.
62018
Potenza Picena, 62018
Italy
  Date of Grant: 03/05/2024

Application Dated: 03/05/2024
 
Attention: Maurizio Riccobelli , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ASUD-CAPRIH100
Name of Grantee:  Elettromedia s.p.a.
Equipment Class: Digital Transmission System
Notes: Digital Media Receiver
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0014655  

Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application ed/G43yye37tD+eMumxHRQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Compliance Testing, LLC
1724 S. Nevada Way
Mesa, AZ 85204
Date of Grant: 03/05/2024

Application Dated: 03/05/2024
Elettromedia s.p.a.
62018
Potenza Picena, 62018
Italy
 
Attention: Maurizio Riccobelli , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ASUD-CAPRIH100
Name of Grantee:  Elettromedia s.p.a.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Digital Media Receiver
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0171791  

Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application ed/G43yye37tD+eMumxHRQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Elettromedia s.p.a.
62018
Potenza Picena, 62018
Italy
  Date of Grant: 03/05/2024

Application Dated: 03/05/2024
 
Attention: Maurizio Riccobelli , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ASUD-CAPRIH100
Name of Grantee:  Elettromedia s.p.a.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Digital Media Receiver
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0171791  

Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: