FCC ID 2ASYX1DXWRU201
Communication module
by ISAAC Instruments Inc.
Grantee Code: 2ASYX Product Code: 1DXWRU201
Latest application date: 2020-11-17
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2020-11-17 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2020-11-17 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: VPYLB1DX Grant Date: 04/27/2016 | 2020-10-15 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: VPYLB1DX Grant Date: 04/27/2016 | 2020-10-15 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2020-11-17 | PDF 403.8 KB |
| External Photos | External Photos | 2020-10-15 | PDF 300.9 KB |
| Label and Label Location | ID Label/Location Info | 2020-11-17 | PDF 1.1 MB |
| Label and Label Location | ID Label/Location Info | 2020-10-15 | PDF 365.6 KB |
| Test Setup Photos | Test Setup Photos | 2020-11-17 | PDF 1.2 MB |
| Test Report | Test Report | 2020-11-17 | PDF 2.7 MB |
| Cover Letters | Cover Letter(s) | 2020-11-17 | PDF 287.5 KB |
| Cover Letters | Cover Letter(s) | 2020-10-15 | PDF 288.9 KB |
| RF Exposure info | RF Exposure Info | 2020-11-17 | PDF 98.1 KB |
Application Information
| Application ID | w1/f2TAAzVZAlrnPcVMNmQ== |
|---|---|
| Final Action Date | 2020-11-17 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0028384626 |
| Model | 1DXWRU201 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Communication module |
| Responsible Party | David Arsenault, Hardware developer, darsenault@isaac.ca  , 4506587520 |
| Test Firm | Charles Neal, Nemko Canada Inc. (Montreal), charles.neal@nemko.com  , 613-737-9680 |
| TCB Email | Stuart.Beck@nemko.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change to integrate this module into host plat form model WRU201 and antenna as described in the filing. Power listed is conducted. For professional installation only. Device shall not be sold to general public. The antenna (s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Use in portable RF exposure conditions will require additional filing for SAR compliance. Compliance of this device in all final product configurations is the responsibility of the Grantee. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| w1/f2TAAzVZAlrnPcVMNmQ== | 2020-11-17 | Class II permissive change or modification of presently authorized equipment |
| m56plAXeT8p+O16iSABaDA== | 2020-11-17 | Class II permissive change or modification of presently authorized equipment |
| s0Y2p0W+0wA84EC+qdIJZw== | 2020-10-15 | Change in identification of presently authorized equipment. Original FCC ID: VPYLB1DX Grant Date: 04/27/2016 |
| Yql1ugjWyXse4+z+DVmgwQ== | 2020-10-15 | Change in identification of presently authorized equipment. Original FCC ID: VPYLB1DX Grant Date: 04/27/2016 |
Equipment Authorization
Grants
TCB Grant - Application Yql1ugjWyXse4+z+DVmgwQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 10/15/2020 Application Dated: 10/15/2020 |
| ISAAC Instruments Inc. |
| 1300 Boul Clairevue O |
| Saint-Bruno-de-Montarville, J3V 0B7 Canada |
| Attention: David Arsenault , Hardware developer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ASYX1DXWRU201 |
| Name of Grantee: | ISAAC Instruments Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.007 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.174 |
| Limited Modular Approval. Power listed is conducted. For professional installation only. Device shall not be sold to general public. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Use in portable RF exposure conditions will require additional filing for SAR compliance. Compliance of this device in all final product configurations is the responsibility of the Grantee. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Yql1ugjWyXse4+z+DVmgwQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ISAAC Instruments Inc. 1300 Boul Clairevue O Saint-Bruno-de-Montarville, J3V 0B7 Canada |
Date of Grant: 10/15/2020 Application Dated: 10/15/2020 |
| Attention: David Arsenault , Hardware developer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ASYX1DXWRU201 |
| Name of Grantee: | ISAAC Instruments Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.007 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.174 |
| Limited Modular Approval. Power listed is conducted. For professional installation only. Device shall not be sold to general public. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Use in portable RF exposure conditions will require additional filing for SAR compliance. Compliance of this device in all final product configurations is the responsibility of the Grantee. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 11/17/2020 Application Dated: 11/17/2020 |
| ISAAC Instruments Inc. |
| 1300 Boul Clairevue O |
| Saint-Bruno-de-Montarville, J3V 0B7 Canada |
| Attention: David Arsenault , Hardware developer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ASYX1DXWRU201 |
| Name of Grantee: | ISAAC Instruments Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.007 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.174 |
| Class II Permissive Change to integrate this module into host plat form model WRU201 and antenna as described in the filing. Power listed is conducted. For professional installation only. Device shall not be sold to general public. The antenna (s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Use in portable RF exposure conditions will require additional filing for SAR compliance. Compliance of this device in all final product configurations is the responsibility of the Grantee. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application w1/f2TAAzVZAlrnPcVMNmQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ISAAC Instruments Inc. 1300 Boul Clairevue O Saint-Bruno-de-Montarville, J3V 0B7 Canada |
Date of Grant: 11/17/2020 Application Dated: 11/17/2020 |
| Attention: David Arsenault , Hardware developer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ASYX1DXWRU201 |
| Name of Grantee: | ISAAC Instruments Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Communication module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.007 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.174 |
| Class II Permissive Change to integrate this module into host plat form model WRU201 and antenna as described in the filing. Power listed is conducted. For professional installation only. Device shall not be sold to general public. The antenna (s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Use in portable RF exposure conditions will require additional filing for SAR compliance. Compliance of this device in all final product configurations is the responsibility of the Grantee. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 10/15/2020 Application Dated: 10/15/2020 |
| ISAAC Instruments Inc. |
| 1300 Boul Clairevue O |
| Saint-Bruno-de-Montarville, J3V 0B7 Canada |
| Attention: David Arsenault , Hardware developer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ASYX1DXWRU201 |
| Name of Grantee: | ISAAC Instruments Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Communication module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.009 |
| Limited Modular Approval. Power listed is conducted. For professional installation only. Device shall not be sold to general public. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Use in portable RF exposure conditions will require additional filing for SAR compliance. Compliance of this device in all final product configurations is the responsibility of the Grantee. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application s0Y2p0W+0wA84EC+qdIJZw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ISAAC Instruments Inc. 1300 Boul Clairevue O Saint-Bruno-de-Montarville, J3V 0B7 Canada |
Date of Grant: 10/15/2020 Application Dated: 10/15/2020 |
| Attention: David Arsenault , Hardware developer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ASYX1DXWRU201 |
| Name of Grantee: | ISAAC Instruments Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Communication module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.009 |
| Limited Modular Approval. Power listed is conducted. For professional installation only. Device shall not be sold to general public. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Use in portable RF exposure conditions will require additional filing for SAR compliance. Compliance of this device in all final product configurations is the responsibility of the Grantee. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 11/17/2020 Application Dated: 11/17/2020 |
| ISAAC Instruments Inc. |
| 1300 Boul Clairevue O |
| Saint-Bruno-de-Montarville, J3V 0B7 Canada |
| Attention: David Arsenault , Hardware developer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ASYX1DXWRU201 |
| Name of Grantee: | ISAAC Instruments Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Communication module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.009 |
| Class II Permissive Change to integrate this module into host plat form model WRU201 and antenna as described in the filing. Power listed is conducted. For professional installation only. Device shall not be sold to general public. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Use in portable RF exposure conditions will require additional filing for SAR compliance. Compliance of this device in all final product configurations is the responsibility of the Grantee. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application m56plAXeT8p+O16iSABaDA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ISAAC Instruments Inc. 1300 Boul Clairevue O Saint-Bruno-de-Montarville, J3V 0B7 Canada |
Date of Grant: 11/17/2020 Application Dated: 11/17/2020 |
| Attention: David Arsenault , Hardware developer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ASYX1DXWRU201 |
| Name of Grantee: | ISAAC Instruments Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Communication module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.009 |
| Class II Permissive Change to integrate this module into host plat form model WRU201 and antenna as described in the filing. Power listed is conducted. For professional installation only. Device shall not be sold to general public. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Use in portable RF exposure conditions will require additional filing for SAR compliance. Compliance of this device in all final product configurations is the responsibility of the Grantee. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |