FCC ID 2ATAJFW0808
Wi-Fi Internet of Things Module
by INFOTRON
Grantee Code: 2ATAJ Product Code: FW0808
Latest application date: 2019-06-25
FCC ID Device Details
| FCC ID | 2ATAJFW0808 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2ATAJ |
| Product Code | FW0808 |
| Applicant Business | INFOTRON 🇰🇷 |
| Equipment Class | Wi-Fi Internet of Things Module |
| Test Firm | LTA Co.,Ltd |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2019-06-25 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2AC7Z-ESP32WROVERB Grant Date: 06/22/2018 | 2019-06-13 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2AC7Z-ESP32WROVERB Grant Date: 06/22/2018 | 2019-06-13 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2019-12-22 | PDF 1.7 MB |
| Internal Photos | Internal Photos | 2019-12-22 | PDF 973.9 KB |
| External Photos | External Photos | 2019-12-22 | PDF 686.6 KB |
| external photos | External Photos | 2019-12-10 | PDF 686.6 KB |
| Label Info | ID Label/Location Info | 2019-06-25 | PDF 36.9 KB |
| label | ID Label/Location Info | 2019-06-13 | PDF 106.2 KB |
| Test Setup Photos | Test Setup Photos | 2019-12-22 | PDF 411.6 KB |
| Test Report | Test Report | 2019-06-25 | PDF 1.5 MB |
| SDoC Attestation Letter | Attestation Statements | 2019-06-25 | PDF 89.2 KB |
| C2PC Cover Letter | Cover Letter(s) | 2019-06-25 | PDF 92.9 KB |
| Confidentiality Letter | Cover Letter(s) | 2019-06-25 | PDF 95.8 KB |
| Confirmation Letter | Cover Letter(s) | 2019-06-25 | PDF 225.7 KB |
| Cover Letter | Cover Letter(s) | 2019-06-25 | PDF 89.8 KB |
| POA | Cover Letter(s) | 2019-06-25 | PDF 19.1 KB |
| Change in ID request letter | Cover Letter(s) | 2019-06-13 | PDF 90.2 KB |
| confidentiality request letter | Cover Letter(s) | 2019-06-13 | PDF 19.1 KB |
| confirmation letter | Cover Letter(s) | 2019-06-13 | PDF 225.7 KB |
| cover letter from original applicant | Cover Letter(s) | 2019-06-13 | PDF 2.1 MB |
| poa | Cover Letter(s) | 2019-06-13 | PDF 19.1 KB |
| RF Exposure | RF Exposure Info | 2019-06-25 | PDF 2.4 MB |
| Block Diagram Metadata only | Block Diagram | PDF 54 KB | |
| Schemaitcs Metadata only | Schematics | PDF 122.5 KB | |
| Operational Description Metadata only | Operational Description | PDF 959.4 KB | |
| Part List Metadata only | Parts List/Tune Up Info | PDF 20.7 KB |
Application Information
| Application ID | D0b1Eis4HLD+XNYL1VayHg== |
|---|---|
| Final Action Date | 2019-06-25 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0028471977 |
| Model | FW0808 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Wi-Fi Internet of Things Module |
| Responsible Party | Mikyung Park, infotron8@gmail.com  , +82-31-374-7808 |
| Test Firm | Ahn Chulho, LTA Co.,Ltd, chahn@ltalab.com  , 82-31-323-6008 |
| TCB Email | tei@timcoengr.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 12/22/2019 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change. Integrating module for portable application into Interment of Things device, Model FW0808. Limited Single Modular Approval. SAR compliance for body-worn operating configurations is limited to the specific body-worn accessories, such as belt-clips and holsters, tested for this filing, or belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 1.0 cm, as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR is 1.42 W/kg. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| D0b1Eis4HLD+XNYL1VayHg== | 2019-06-25 | Class II permissive change or modification of presently authorized equipment |
| UwqpX29JuOctGhFWpxujIA== | 2019-06-13 | Change in identification of presently authorized equipment. Original FCC ID: 2AC7Z-ESP32WROVERB Grant Date: 06/22/2018 |
| Gy5U0FSRg99/XtVlo1ivYg== | 2019-06-13 | Change in identification of presently authorized equipment. Original FCC ID: 2AC7Z-ESP32WROVERB Grant Date: 06/22/2018 |
Equipment Authorization
Grants
TCB Grant - Application UwqpX29JuOctGhFWpxujIA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 06/13/2019 Application Dated: 06/13/2019 |
| INFOTRON |
| 87 Bandal-ro Yeongtong-gu Suwon-si Gyeonggi-do |
| Suwon-si, South Korea |
| Attention: Mikyung Park |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ATAJFW0808 |
| Name of Grantee: | INFOTRON |
| Equipment Class: | Digital Transmission System |
| Notes: | Single Modular Approval |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.001 | |||
| 15C | 2412.0 - 2462.0 | 0.236 |
| Modular approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM or OEM integrators. Modular approval for use as a module in mobile-only RF exposure conditions. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. This device supports 20 MHz and 40 MHz bandwidth modes. |
EAS Grant - Application UwqpX29JuOctGhFWpxujIA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
INFOTRON 87 Bandal-ro Yeongtong-gu Suwon-si Gyeonggi-do Suwon-si, South Korea |
Date of Grant: 06/13/2019 Application Dated: 06/13/2019 |
| Attention: Mikyung Park |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ATAJFW0808 |
| Name of Grantee: | INFOTRON |
| Equipment Class: | Digital Transmission System |
| Notes: | Single Modular Approval |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.001 | |||
| 15C | 2412.0 - 2462.0 | 0.236 |
| Modular approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM or OEM integrators. Modular approval for use as a module in mobile-only RF exposure conditions. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. This device supports 20 MHz and 40 MHz bandwidth modes. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 06/13/2019 Application Dated: 06/13/2019 |
| INFOTRON |
| 87 Bandal-ro Yeongtong-gu Suwon-si Gyeonggi-do |
| Suwon-si, South Korea |
| Attention: Mikyung Park |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ATAJFW0808 |
| Name of Grantee: | INFOTRON |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Single Modular Approval |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.003 |
| Modular approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM or OEM integrators. Modular approval for use as a module in mobile-only RF exposure conditions. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. |
EAS Grant - Application Gy5U0FSRg99/XtVlo1ivYg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
INFOTRON 87 Bandal-ro Yeongtong-gu Suwon-si Gyeonggi-do Suwon-si, South Korea |
Date of Grant: 06/13/2019 Application Dated: 06/13/2019 |
| Attention: Mikyung Park |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ATAJFW0808 |
| Name of Grantee: | INFOTRON |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Single Modular Approval |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.003 |
| Modular approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM or OEM integrators. Modular approval for use as a module in mobile-only RF exposure conditions. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 06/25/2019 Application Dated: 06/25/2019 |
| INFOTRON |
| 87 Bandal-ro Yeongtong-gu Suwon-si Gyeonggi-do |
| Suwon-si, South Korea |
| Attention: Mikyung Park |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ATAJFW0808 |
| Name of Grantee: | INFOTRON |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi Internet of Things Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.236 |
| Class II Permissive Change. Integrating module for portable application into Interment of Things device, Model FW0808. Limited Single Modular Approval. SAR compliance for body-worn operating configurations is limited to the specific body-worn accessories, such as belt-clips and holsters, tested for this filing, or belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 1.0 cm, as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR is 1.42 W/kg. |
EAS Grant - Application D0b1Eis4HLD+XNYL1VayHg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
INFOTRON 87 Bandal-ro Yeongtong-gu Suwon-si Gyeonggi-do Suwon-si, South Korea |
Date of Grant: 06/25/2019 Application Dated: 06/25/2019 |
| Attention: Mikyung Park |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ATAJFW0808 |
| Name of Grantee: | INFOTRON |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi Internet of Things Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.236 |
| Class II Permissive Change. Integrating module for portable application into Interment of Things device, Model FW0808. Limited Single Modular Approval. SAR compliance for body-worn operating configurations is limited to the specific body-worn accessories, such as belt-clips and holsters, tested for this filing, or belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 1.0 cm, as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR is 1.42 W/kg. |
| Mail To: |