FCC ID 2ATEV-BL1206-P
WIFI Module
by Hangzhou BroadLink Technology Co., Ltd.
Grantee Code: 2ATEV Product Code: BL1206P
Latest application date: 2022-01-09
FCC ID Device Details
| FCC ID | 2ATEV-BL1206-P |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2ATEV |
| Product Code | BL1206P |
| Applicant Business | Hangzhou BroadLink Technology Co., Ltd. 🇨🇳 |
| Related Domains |  broadlink.com.cn  sgs.com |
| Equipment Class | WIFI Module |
| Test Firm | SGS-CSTC Standards Technical Services Co., Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2422-2452 MHz | Class II permissive change or modification of presently authorized equipment | 2022-01-09 |
| 2412-2462 MHz | Original Equipment | 2020-08-11 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2020-08-11 | PDF 1.4 MB |
| Internal photo | Internal Photos | 2022-01-09 | PDF 1.6 MB |
| Internal Photos | Internal Photos | 2020-08-11 | PDF 970.4 KB |
| External photo | External Photos | 2022-01-09 | PDF 1.4 MB |
| External Photos | External Photos | 2020-08-11 | PDF 1 MB |
| Label | ID Label/Location Info | 2020-08-11 | PDF 121.1 KB |
| Test setup photo | Test Setup Photos | 2022-01-09 | PDF 1.8 MB |
| Test Setup Photo | Test Setup Photos | 2020-08-11 | PDF 215.8 KB |
| Appendix A for 2.4G WiFi | Test Report | 2022-01-09 | PDF 1.5 MB |
| Test report | Test Report | 2022-01-09 | PDF 1.9 MB |
| Test Report | Test Report | 2020-08-11 | PDF 3.4 MB |
| Applicant_Declaration_Letter | Cover Letter(s) | 2022-01-09 | PDF 154.8 KB |
| Auth letter | Cover Letter(s) | 2022-01-09 | PDF 136.5 KB |
| Confidentiality letter | Cover Letter(s) | 2022-01-09 | PDF 38.5 KB |
| FCC_C2PC_Request | Cover Letter(s) | 2022-01-09 | PDF 242.1 KB |
| Applicant_Declaration_Letter | Cover Letter(s) | 2020-08-11 | PDF 118.5 KB |
| Confidentiality Letter | Cover Letter(s) | 2020-08-11 | PDF 87.1 KB |
| Modular cover letter | Cover Letter(s) | 2020-08-11 | PDF 106.4 KB |
| POA | Cover Letter(s) | 2020-08-11 | PDF 22.1 KB |
| MPE | RF Exposure Info | 2022-01-09 | PDF 1.1 MB |
| MPE Report | RF Exposure Info | 2020-08-11 | PDF 480.7 KB |
| Block Diagram Metadata only | Block Diagram | PDF 160.8 KB | |
| Schematic Metadata only | Schematics | PDF 240 KB | |
| Schematic Metadata only | Schematics | PDF 329.1 KB | |
| Operation Description Metadata only | Operational Description | PDF 19.1 KB |
Application Information
| Application ID | T7gEA5pNxIQLv/wyOdPk9A== |
|---|---|
| Final Action Date | 2022-01-09 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0028494466 |
| Model | BL1206-P |
| Frequency Range | 2422-2452 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | WIFI Module |
| Responsible Party | Mengjiao Yan, PM, mengjiao.yan@broadlink.com.cn , +86-400-0900-955 |
| Agent | Parlam Parlam Parlam, SGS-CSTC Standards Technical Services Co., Ltd., Parlam.zhan@sgs.com , +862161915666 |
| Technical Contact | Parlam Zhan, SGS-CSTC Standards Technical Services Co., Ltd., Parlam.zhan@sgs.com , +862161915666 |
| Non-Technical Contact | Parlam Zhan, SGS-CSTC Standards Technical Services Co., Ltd., Parlam.zhan@sgs.com , +862161915666 |
| Test Firm | Kingsley Zhou, SGS-CSTC Standards Technical Services Co., Ltd., Kingsley.Zhou@sgs.com , 13636390700 |
| TCB Email | USCTS.TCB@SGS.COM |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | C2PC to change PCB board. Single Modular Approval. Power Output listed is conducted. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 1.0 dBi for satisfying RF exposure compliance according to as defined in 2.1091. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| T7gEA5pNxIQLv/wyOdPk9A== | 2022-01-09 | Class II permissive change or modification of presently authorized equipment |
| ZJ35vmdYqvQmGiiAQrV5KA== | 2020-08-11 | Original Equipment |
Grants
TCB Grant - Application ZJ35vmdYqvQmGiiAQrV5KA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 08/11/2020 Application Dated: 08/11/2020 |
| Hangzhou BroadLink Technology Co., Ltd. |
| Unit C,Building 1,No.57 Jiang'er Road, |
| Changhe Street,Binjiang District |
| Hangzhou, Zhejiang, China |
| Attention: Mengjiao Yan , PM |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ATEV-BL1206-P |
| Name of Grantee: | Hangzhou BroadLink Technology Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | BroadLink |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.048 | |||
| 15C | 2422.0 - 2452.0 | 0.027 |
| Single Modular Approval. Power Output listed is conducted. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 1.0 dBi for satisfying RF exposure compliance according to as defined in 2.1091. |
EAS Grant - Application ZJ35vmdYqvQmGiiAQrV5KA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hangzhou BroadLink Technology Co., Ltd. Unit C,Building 1,No.57 Jiang'er Road, Changhe Street,Binjiang District Hangzhou, Zhejiang, China |
Date of Grant: 08/11/2020 Application Dated: 08/11/2020 |
| Attention: Mengjiao Yan , PM |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ATEV-BL1206-P |
| Name of Grantee: | Hangzhou BroadLink Technology Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | BroadLink |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.048 | |||
| 15C | 2422.0 - 2452.0 | 0.027 |
| Single Modular Approval. Power Output listed is conducted. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 1.0 dBi for satisfying RF exposure compliance according to as defined in 2.1091. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 01/09/2022 Application Dated: 01/09/2022 |
| Hangzhou BroadLink Technology Co., Ltd. |
| Unit C,Building 1,No.57 Jiang'er Road, |
| Changhe Street,Binjiang District |
| Hangzhou, Zhejiang, China |
| Attention: Mengjiao Yan , PM |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ATEV-BL1206-P |
| Name of Grantee: | Hangzhou BroadLink Technology Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | WIFI Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.048 | |||
| 15C | 2422.0 - 2452.0 | 0.027 |
| C2PC to change PCB board. Single Modular Approval. Power Output listed is conducted. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 1.0 dBi for satisfying RF exposure compliance according to as defined in 2.1091. |
EAS Grant - Application T7gEA5pNxIQLv/wyOdPk9A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Hangzhou BroadLink Technology Co., Ltd. Unit C,Building 1,No.57 Jiang'er Road, Changhe Street,Binjiang District Hangzhou, Zhejiang, China |
Date of Grant: 01/09/2022 Application Dated: 01/09/2022 |
| Attention: Mengjiao Yan , PM |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ATEV-BL1206-P |
| Name of Grantee: | Hangzhou BroadLink Technology Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | WIFI Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.048 | |||
| 15C | 2422.0 - 2452.0 | 0.027 |
| C2PC to change PCB board. Single Modular Approval. Power Output listed is conducted. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 1.0 dBi for satisfying RF exposure compliance according to as defined in 2.1091. |
| Mail To: |