FCC ID 2ATPO-ESP32-SU
Wi-Fi & BT Module
by Shenzhen Ai-Thinker Technology Co., Ltd
Grantee Code: 2ATPO Product Code: ESP32SU
Latest application date: 2022-01-05
FCC ID Device Details
| FCC ID | 2ATPO-ESP32-SU |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2ATPO |
| Product Code | ESP32SU |
| Applicant Business | Shenzhen Ai-Thinker Technology Co., Ltd 🇨🇳 |
| Related Domains |  tech-now.com  ctb-lab.com |
| Equipment Class | Wi-Fi & BT Module |
| Test Firm | Shenzhen CTB Testing Technology Co., Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2022-01-05 |
| 2412-2462 MHz | Original Equipment | 2022-01-05 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User manual | Users Manual | 2022-06-01 | PDF 1.4 MB |
| Internal photos | Internal Photos | 2022-01-05 | PDF 233.1 KB |
| External photos | External Photos | 2022-01-05 | PDF 338.8 KB |
| ID label and location | ID Label/Location Info | 2022-01-05 | PDF 178.7 KB |
| Test setup photos | Test Setup Photos | 2022-01-05 | PDF 323.7 KB |
| Test reports | Test Report | 2022-01-05 | PDF 2.7 MB |
| Test reports | Test Report | 2022-01-05 | PDF 2.7 MB |
| Confidentiality | Cover Letter(s) | 2022-01-05 | PDF 119 KB |
| Letter Authorization | Cover Letter(s) | 2022-01-05 | PDF 19.6 KB |
| Modular_Transmitter_Approval | Cover Letter(s) | 2022-01-05 | PDF 22.7 KB |
| RF Exposure | RF Exposure Info | 2022-01-05 | PDF 30.7 KB |
| Block Diagram Metadata only | Block Diagram | PDF 142.7 KB | |
| Schematics Metadata only | Schematics | PDF 16.1 KB | |
| Operational Description Metadata only | Operational Description | PDF 41.4 KB |
Application Information
| Application ID | lnvHYoUIUXwAeJvYpaEIjg== |
|---|---|
| Final Action Date | 2022-01-05 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0028581585 |
| Model | ESP32-SU |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Wi-Fi & BT Module |
| Responsible Party | guan ning, guann@tech-now.com , 18682108275 |
| Technical Contact | Simon Lee, Shenzhen CTB Testing Technology Co., Ltd., simon@ctb-lab.com , (86) 13662574496 |
| Non-Technical Contact | Simon Lee, Shenzhen CTB Testing Technology Co., Ltd., simon@ctb-lab.com , (86) 13662574496 |
| Test Firm | Simon Lee, Shenzhen CTB Testing Technology Co., Ltd., simon@ctb-lab.com , 86 13662574496 |
| TCB Email | elabscert@applus.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 06/01/2022 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| lnvHYoUIUXwAeJvYpaEIjg== | 2022-01-05 | Original Equipment |
| KFOFksosJzs3eGy5dNk7cw== | 2022-01-05 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application lnvHYoUIUXwAeJvYpaEIjg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
LGAI Technological Center S.A. (APPLUS) Ronda de la Font del Carme, s/n <BR>P.O. Box 08193, Barcelona, Spain |
Date of Grant: 01/05/2022 Application Dated: 01/05/2022 |
| Shenzhen Ai-Thinker Technology Co., Ltd |
| 410, Block C, Huafeng Smart Innovation Port, Gushu |
| 2nd Road, Gushu Community, Xixiang Street, |
| Baoan District, Shenzhen, China |
| Attention: guan ning |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ATPO-ESP32-SU |
| Name of Grantee: | Shenzhen Ai-Thinker Technology Co., Ltd |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wi-Fi & BT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0007 |
| Single Modular Approval. Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application lnvHYoUIUXwAeJvYpaEIjg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Ai-Thinker Technology Co., Ltd 410, Block C, Huafeng Smart Innovation Port, Gushu 2nd Road, Gushu Community, Xixiang Street, Baoan District, Shenzhen, China |
Date of Grant: 01/05/2022 Application Dated: 01/05/2022 |
| Attention: guan ning |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ATPO-ESP32-SU |
| Name of Grantee: | Shenzhen Ai-Thinker Technology Co., Ltd |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wi-Fi & BT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0007 |
| Single Modular Approval. Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
LGAI Technological Center S.A. (APPLUS) Ronda de la Font del Carme, s/n <BR>P.O. Box 08193, Barcelona, Spain |
Date of Grant: 01/05/2022 Application Dated: 01/05/2022 |
| Shenzhen Ai-Thinker Technology Co., Ltd |
| 410, Block C, Huafeng Smart Innovation Port, Gushu |
| 2nd Road, Gushu Community, Xixiang Street, |
| Baoan District, Shenzhen, China |
| Attention: guan ning |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ATPO-ESP32-SU |
| Name of Grantee: | Shenzhen Ai-Thinker Technology Co., Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi & BT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00119 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.0561 |
| Single Modular Approval. Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application KFOFksosJzs3eGy5dNk7cw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Ai-Thinker Technology Co., Ltd 410, Block C, Huafeng Smart Innovation Port, Gushu 2nd Road, Gushu Community, Xixiang Street, Baoan District, Shenzhen, China |
Date of Grant: 01/05/2022 Application Dated: 01/05/2022 |
| Attention: guan ning |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ATPO-ESP32-SU |
| Name of Grantee: | Shenzhen Ai-Thinker Technology Co., Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi & BT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00119 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.0561 |
| Single Modular Approval. Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |