FCC ID 2ATQRSMODBV3S
SkydioLink Third Generation Radio Module
by Skydio, Inc.
Grantee Code: 2ATQR Product Code: SMODBV3S
Latest application date: 2025-01-05
FCC ID Device Details
| FCC ID | 2ATQRSMODBV3S |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2ATQR |
| Product Code | SMODBV3S |
| Applicant Business | Skydio, Inc. 🇺🇸 |
| Related Domains |  skydio.com |
| Equipment Class | SkydioLink Third Generation Radio Module |
| Test Firm | Sporton International (USA) Inc |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5730-5845 MHz | Class III permissive change to software defined radio | 2025-01-05 |
| 5180-5240 MHz | Class III permissive change to software defined radio | 2024-02-27 |
| 2407-2472 MHz | Class III permissive change to software defined radio | 2024-02-27 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2ATQRSMODBV3 Grant Date: 09/25/2023 | 2023-11-30 |
| 2407-2472 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2ATQRSMODBV3 Grant Date: 09/25/2023 | 2023-11-30 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| CS_X10_Legal information_r1 Metadata only | Users Manual | 2024-08-26 | PDF 81.2 KB |
| CS_X10_Legal information_r2 | Users Manual | 2024-08-26 | PDF 84.7 KB |
| CS_X10_X10CTRL_QSG | Users Manual | 2024-08-26 | PDF 1.4 MB |
| C18_Internal-Photos | Internal Photos | 2024-08-26 | PDF 975.3 KB |
| C18_External-Photos | External Photos | 2024-08-26 | PDF 1.5 MB |
| 2ATQRSMODBV3_ExtPho | External Photos | 2024-05-29 | PDF 431 KB |
| C18_Label location | ID Label/Location Info | 2024-02-27 | PDF 35.2 KB |
| C18_Product Label | ID Label/Location Info | 2024-02-27 | PDF 578.6 KB |
| Label Location | ID Label/Location Info | 2023-11-30 | PDF 367.8 KB |
| Label Sample | ID Label/Location Info | 2023-11-30 | PDF 64 KB |
| FZ241114001_R01_Part15E DFS (photo | Test Setup Photos | 2025-07-05 | PDF 223.5 KB |
| C18_Antennas distances | Test Setup Photos | 2024-08-26 | PDF 126.2 KB |
| SC18V1_FCC-SAR_Test Setup Photos | Test Setup Photos | 2024-08-26 | PDF 1.5 MB |
| FZ241114001_R02_Part15E DFS | Test Report | 2025-01-05 | PDF 841.1 KB |
| 2ATQRSMODBV3S_Antenna Report (High gain) | Test Report | 2024-02-27 | PDF 647.2 KB |
| 2ATQRSMODBV3S Covered List_2.911d5 (i) | Attestation Statements | 2025-01-05 | PDF 177.3 KB |
| 2ATQRSMODBV3S Covered List_2.911d5 (ii) | Attestation Statements | 2025-01-05 | PDF 177.3 KB |
| Agent Letter 2024-12-2_2.911d7 | Attestation Statements | 2025-01-05 | PDF 262.6 KB |
| 2ATQRSMODBV3S_Attestation_Covered Equipment_2.911d5(i) | Attestation Statements | 2024-02-27 | PDF 105.6 KB |
| 2ATQRSMODBV3S_Attestation_Covered Equipment_2.911d5(ii) | Attestation Statements | 2024-02-27 | PDF 105.6 KB |
| 2ATQRSMODBV3S_Attestation_US Agent Letter_2.911d7 | Attestation Statements | 2024-02-27 | PDF 114.1 KB |
| SC18V1_SAR Duty Cycle Letter of Attestation | Attestation Statements | 2024-02-27 | PDF 254.9 KB |
| 2ATQRSMODBV3S_Covered Equipment_2.911d5(i) | Attestation Statements | 2023-11-30 | PDF 102 KB |
| 2ATQRSMODBV3S_Covered Equipment_2.911d5(ii) | Attestation Statements | 2023-11-30 | PDF 102 KB |
| 2ATQR_US Agent Letter_2.911d7 | Attestation Statements | 2023-11-30 | PDF 110.7 KB |
| 2ATQRSMODBV3S_C3PC Request 2024-12-6 | Cover Letter(s) | 2025-01-05 | PDF 142.1 KB |
| 2ATQRSMODBV3S_Confidentiality | Cover Letter(s) | 2025-01-05 | PDF 155.8 KB |
| 2ATQRSMODBV3S_cvrltr_FCC POA | Cover Letter(s) | 2025-01-05 | PDF 100 KB |
| 2ATQRSMODBV3S_cvrltr_FCC Confidentiality Request | Cover Letter(s) | 2024-02-27 | PDF 91.8 KB |
| 2ATQRSMODBV3S_cvrltr_FCC POA | Cover Letter(s) | 2024-02-27 | PDF 106.7 KB |
| 2ATQRSMODBV3S_cvrltr_FCC Permissive Change_r1 | Cover Letter(s) | 2024-02-27 | PDF 52 KB |
| 2ATQRSMODBV3S_Change-FCC-ID | Cover Letter(s) | 2023-11-30 | PDF 90.5 KB |
| 2ATQRSMODBV3S_Conf-Request_Long Term | Cover Letter(s) | 2023-11-30 | PDF 117.6 KB |
| 2ATQRSMODBV3S_Conf-Request_Short Term | Cover Letter(s) | 2023-11-30 | PDF 119 KB |
| 2ATQRSMODBV3S_LoA | Cover Letter(s) | 2023-11-30 | PDF 92.6 KB |
| 2ATQRSMODBV3S_Modular-Approval | Cover Letter(s) | 2023-11-30 | PDF 123.4 KB |
| FA241114001_R01_RF Exposure | RF Exposure Info | 2025-01-05 | PDF 291.8 KB |
| SC18V1_FCC-SAR-2023917-Rev D | RF Exposure Info | 2024-02-27 | PDF 1.9 MB |
| C18_Block diagram Metadata only | Block Diagram | PDF 172.9 KB | |
| 2ATQRSMODBV3S_KDB 594280 D02 SW Security Metadata only | Operational Description | PDF 84.1 KB | |
| 2ATQRSMODBV3S_Theory of Operation_20241123 Metadata only | Operational Description | PDF 323.7 KB | |
| 2ATQRSMODBV3S_OpDes_KDB442812_SDR Security Metadata only | SDR Software/Security Info. | PDF 140 KB | |
| 2ATQRSMODBV3S_OpDes_KDB442812_SDR Security_r1 Metadata only | SDR Software/Security Inf | PDF 140 KB | |
| 2ATQRSMODBV3S_SDR Letter Metadata only | SDR Software/Security Info. | PDF 107.9 KB |
Application Information
| Application ID | 9GlbOLTQKbhVk2SKjFG65g== |
|---|---|
| Final Action Date | 2025-01-05 |
| Application Purpose | Class III permissive change to software defined radio |
| Applicant FRN | 0028587939 |
| Model | SMODBV3S |
| Frequency Range | 5730-5845 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | SkydioLink Third Generation Radio Module |
| Responsible Party | Michael Green, michael.green@skydio.com , 855-463-5902 |
| Agent | Irene Irene Irene, Sporton International Inc., irenechung@sporton.com.tw  , 886-3-327-3456 |
| Test Firm | Kevin Lu, Sporton International (USA) Inc, Kevinlu@sporton-usa.com  , 16692729004 |
| TCB Email | QA65@sporton-usa.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 07/05/2025 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | Yes |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Software Defined Radio Device. Single Modular Approval. This grant is valid only when the module is installed in the grantee’s host device as specified in the OEM integration guide. Output power listed is conducted. This device only supports 2x2 MIMO. This device complies with the Dynamic Frequency Selection (DFS) requirements as a master device and a Client without Radar Detection. Only those antennas tested with the device or equivalent antennas with equal gain may be used with this module. WLAN operation in 5150-5350 MHz and 5470-5725 MHz supports operating bandwidths of 20 MHz, 40 MHz and 80 MHz, and WLAN operation in 5725-5850 MHz supports operating bandwidths of 10 MHz and 20 MHz for single RU, and 5 MHz, 10 MHz, 20 MHz, 40 MHz and 80 MHz for full RU. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Class III Permissive Change: Implement Zero-Wait DFS feature via embedded software. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 9GlbOLTQKbhVk2SKjFG65g== | 2025-01-05 | Class III permissive change to software defined radio |
| zK+XAyxtr6ChlcHyhnXw9g== | 2024-02-27 | Class III permissive change to software defined radio |
| RQ+OMcINr4JHdUfyv2kXYw== | 2024-02-27 | Class III permissive change to software defined radio |
| VVihA2O+BCPyaiWsR5crJQ== | 2023-11-30 | Change in identification of presently authorized equipment. Original FCC ID: 2ATQRSMODBV3 Grant Date: 09/25/2023 |
| KSHI1UvEEV7vVjLcJXnAFQ== | 2023-11-30 | Change in identification of presently authorized equipment. Original FCC ID: 2ATQRSMODBV3 Grant Date: 09/25/2023 |
Equipment Authorization
Grants
TCB Grant - Application zK+XAyxtr6ChlcHyhnXw9g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Sporton International (USA) Inc. 1175 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 02/27/2024 Application Dated: 02/02/2024 |
| Skydio, Inc. |
| 3000 Clearview Way |
| Building E |
| SAN MATEO, CA 94402 |
| Attention: Joe Marcinkowski |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ATQRSMODBV3S |
| Name of Grantee: | Skydio, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | SkydioLink Third Generation Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.7228 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.2323 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.246 | ||
| CC MO | 15E | 5730.0 - 5845.0 | 0.9908 |
| Software Defined Radio Device. Single Modular Approval. This grant is valid only when the module is installed in the grantee’s host device as specified in the OEM integration guide. Output power listed is conducted. This device only supports 2x2 MIMO. This device complies with the Dynamic Frequency Selection (DFS) requirements as a master device and a Client without Radar Detection. Only those antennas tested with the device or equivalent antennas with equal gain may be used with this module. WLAN operation in 5150-5350 MHz and 5470-5725 MHz supports operating bandwidths of 20 MHz, 40 MHz and 80 MHz, and WLAN operation in 5725-5850 MHz supports operating bandwidths of 10 MHz and 20 MHz for single RU, and 5 MHz, 10 MHz, 20 MHz, 40 MHz and 80 MHz for full RU. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Class III Permissive Change: Allows portable use when integrated into the portable host Wireless Drone Remote SC18V1. The highest reported SAR for the body, extremity (hand), and simultaneous transmission use conditions are 1.39 W/kg, 0.47 W/kg (10g), 2.81 W/kg (10g), respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application zK+XAyxtr6ChlcHyhnXw9g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Skydio, Inc. 3000 Clearview Way Building E SAN MATEO, CA 94402 United States |
Date of Grant: 02/27/2024 Application Dated: 02/02/2024 |
| Attention: Joe Marcinkowski |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ATQRSMODBV3S |
| Name of Grantee: | Skydio, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | SkydioLink Third Generation Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.7228 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.2323 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.246 | ||
| CC MO | 15E | 5730.0 - 5845.0 | 0.9908 |
| Software Defined Radio Device. Single Modular Approval. This grant is valid only when the module is installed in the grantee’s host device as specified in the OEM integration guide. Output power listed is conducted. This device only supports 2x2 MIMO. This device complies with the Dynamic Frequency Selection (DFS) requirements as a master device and a Client without Radar Detection. Only those antennas tested with the device or equivalent antennas with equal gain may be used with this module. WLAN operation in 5150-5350 MHz and 5470-5725 MHz supports operating bandwidths of 20 MHz, 40 MHz and 80 MHz, and WLAN operation in 5725-5850 MHz supports operating bandwidths of 10 MHz and 20 MHz for single RU, and 5 MHz, 10 MHz, 20 MHz, 40 MHz and 80 MHz for full RU. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Class III Permissive Change: Allows portable use when integrated into the portable host Wireless Drone Remote SC18V1. The highest reported SAR for the body, extremity (hand), and simultaneous transmission use conditions are 1.39 W/kg, 0.47 W/kg (10g), 2.81 W/kg (10g), respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Sporton International (USA) Inc. 1175 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 11/30/2023 Application Dated: 11/22/2023 |
| Skydio, Inc. |
| 3000 Clearview Way |
| Building E |
| SAN MATEO, CA 94402 |
| Attention: Joe Marcinkowski |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ATQRSMODBV3S |
| Name of Grantee: | Skydio, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | SkydioLink Third Generation Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.7228 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.2323 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.246 | ||
| CC MO | 15E | 5730.0 - 5845.0 | 0.9908 |
| Software Defined Radio Device. Single Modular Approval. This grant is valid only when the module is installed in the grantee’s host device as specified in the OEM integration guide. Output power listed is conducted. This device only supports 2x2 MIMO. This device complies with the Dynamic Frequency Selection (DFS) requirements as a master device and a Client without Radar Detection. Only those antennas tested with the device or equivalent antennas with equal gain may be used with this module. WLAN operation in 5150-5350 MHz and 5470-5725 MHz supports operating bandwidths of 20 MHz, 40 MHz and 80 MHz, and WLAN operation in 5725-5850 MHz supports operating bandwidths of 10 MHz and 20 MHz for single RU, and 5 MHz, 10 MHz, 20 MHz, 40 MHz and 80 MHz for full RU. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application VVihA2O+BCPyaiWsR5crJQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Skydio, Inc. 3000 Clearview Way Building E SAN MATEO, CA 94402 United States |
Date of Grant: 11/30/2023 Application Dated: 11/22/2023 |
| Attention: Joe Marcinkowski |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ATQRSMODBV3S |
| Name of Grantee: | Skydio, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | SkydioLink Third Generation Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.7228 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.2323 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.246 | ||
| CC MO | 15E | 5730.0 - 5845.0 | 0.9908 |
| Software Defined Radio Device. Single Modular Approval. This grant is valid only when the module is installed in the grantee’s host device as specified in the OEM integration guide. Output power listed is conducted. This device only supports 2x2 MIMO. This device complies with the Dynamic Frequency Selection (DFS) requirements as a master device and a Client without Radar Detection. Only those antennas tested with the device or equivalent antennas with equal gain may be used with this module. WLAN operation in 5150-5350 MHz and 5470-5725 MHz supports operating bandwidths of 20 MHz, 40 MHz and 80 MHz, and WLAN operation in 5725-5850 MHz supports operating bandwidths of 10 MHz and 20 MHz for single RU, and 5 MHz, 10 MHz, 20 MHz, 40 MHz and 80 MHz for full RU. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Sporton International (USA) Inc. 1175 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 02/27/2024 Application Dated: 02/02/2024 |
| Skydio, Inc. |
| 3000 Clearview Way |
| Building E |
| SAN MATEO, CA 94402 |
| Attention: Joe Marcinkowski |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ATQRSMODBV3S |
| Name of Grantee: | Skydio, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | SkydioLink Third Generation Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2407.0 - 2472.0 | 0.9954 |
| Software Defined Radio Device. Single Modular Approval. This grant is valid only when the module is installed in the grantee’s host device as specified in the OEM integration guide. Output power listed is conducted. This device only supports 2x2 MIMO and operating bandwidths of 10 MHz and 20 MHz for single RU, and 5 MHz, 10 MHz and 20 MHz for full RU. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Class III Permissive Change: Allows portable use when integrated into the portable host Wireless Drone Remote SC18V1. The highest reported SAR for the body, extremity (hand), and simultaneous transmission use conditions are 1.03 W/kg, 0.54 W/kg (10g), 2.83 W/kg (10g), respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application RQ+OMcINr4JHdUfyv2kXYw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Skydio, Inc. 3000 Clearview Way Building E SAN MATEO, CA 94402 United States |
Date of Grant: 02/27/2024 Application Dated: 02/02/2024 |
| Attention: Joe Marcinkowski |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ATQRSMODBV3S |
| Name of Grantee: | Skydio, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | SkydioLink Third Generation Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2407.0 - 2472.0 | 0.9954 |
| Software Defined Radio Device. Single Modular Approval. This grant is valid only when the module is installed in the grantee’s host device as specified in the OEM integration guide. Output power listed is conducted. This device only supports 2x2 MIMO and operating bandwidths of 10 MHz and 20 MHz for single RU, and 5 MHz, 10 MHz and 20 MHz for full RU. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Class III Permissive Change: Allows portable use when integrated into the portable host Wireless Drone Remote SC18V1. The highest reported SAR for the body, extremity (hand), and simultaneous transmission use conditions are 1.03 W/kg, 0.54 W/kg (10g), 2.83 W/kg (10g), respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Sporton International (USA) Inc. 1175 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 11/30/2023 Application Dated: 11/22/2023 |
| Skydio, Inc. |
| 3000 Clearview Way |
| Building E |
| SAN MATEO, CA 94402 |
| Attention: Joe Marcinkowski |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ATQRSMODBV3S |
| Name of Grantee: | Skydio, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | SkydioLink Third Generation Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2407.0 - 2472.0 | 0.9954 |
| Software Defined Radio Device. Single Modular Approval. This grant is valid only when the module is installed in the grantee’s host device as specified in the OEM integration guide. Output power listed is conducted. This device only supports 2x2 MIMO and operating bandwidths of 10 MHz and 20 MHz for single RU, and 5 MHz, 10 MHz and 20 MHz for full RU. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application KSHI1UvEEV7vVjLcJXnAFQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Skydio, Inc. 3000 Clearview Way Building E SAN MATEO, CA 94402 United States |
Date of Grant: 11/30/2023 Application Dated: 11/22/2023 |
| Attention: Joe Marcinkowski |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ATQRSMODBV3S |
| Name of Grantee: | Skydio, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | SkydioLink Third Generation Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2407.0 - 2472.0 | 0.9954 |
| Software Defined Radio Device. Single Modular Approval. This grant is valid only when the module is installed in the grantee’s host device as specified in the OEM integration guide. Output power listed is conducted. This device only supports 2x2 MIMO and operating bandwidths of 10 MHz and 20 MHz for single RU, and 5 MHz, 10 MHz and 20 MHz for full RU. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Sporton International (USA) Inc. 1175 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 01/05/2025 Application Dated: 12/10/2024 |
| Skydio, Inc. |
| 3000 Clearview Way |
| Building E |
| SAN MATEO, CA 94402 |
| Attention: Michael Green |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ATQRSMODBV3S |
| Name of Grantee: | Skydio, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | SkydioLink Third Generation Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.7228 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.2323 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.246 | ||
| CC MO | 15E | 5730.0 - 5845.0 | 0.9908 |
| Software Defined Radio Device. Single Modular Approval. This grant is valid only when the module is installed in the grantee’s host device as specified in the OEM integration guide. Output power listed is conducted. This device only supports 2x2 MIMO. This device complies with the Dynamic Frequency Selection (DFS) requirements as a master device and a Client without Radar Detection. Only those antennas tested with the device or equivalent antennas with equal gain may be used with this module. WLAN operation in 5150-5350 MHz and 5470-5725 MHz supports operating bandwidths of 20 MHz, 40 MHz and 80 MHz, and WLAN operation in 5725-5850 MHz supports operating bandwidths of 10 MHz and 20 MHz for single RU, and 5 MHz, 10 MHz, 20 MHz, 40 MHz and 80 MHz for full RU. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Class III Permissive Change: Implement Zero-Wait DFS feature via embedded software. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application 9GlbOLTQKbhVk2SKjFG65g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Skydio, Inc. 3000 Clearview Way Building E SAN MATEO, CA 94402 United States |
Date of Grant: 01/05/2025 Application Dated: 12/10/2024 |
| Attention: Michael Green |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ATQRSMODBV3S |
| Name of Grantee: | Skydio, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | SkydioLink Third Generation Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.7228 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.2323 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.246 | ||
| CC MO | 15E | 5730.0 - 5845.0 | 0.9908 |
| Software Defined Radio Device. Single Modular Approval. This grant is valid only when the module is installed in the grantee’s host device as specified in the OEM integration guide. Output power listed is conducted. This device only supports 2x2 MIMO. This device complies with the Dynamic Frequency Selection (DFS) requirements as a master device and a Client without Radar Detection. Only those antennas tested with the device or equivalent antennas with equal gain may be used with this module. WLAN operation in 5150-5350 MHz and 5470-5725 MHz supports operating bandwidths of 20 MHz, 40 MHz and 80 MHz, and WLAN operation in 5725-5850 MHz supports operating bandwidths of 10 MHz and 20 MHz for single RU, and 5 MHz, 10 MHz, 20 MHz, 40 MHz and 80 MHz for full RU. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Class III Permissive Change: Implement Zero-Wait DFS feature via embedded software. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |