FCC ID 2ATX7-MBC-WB01
MBC-WB
by Meteca SA
Grantee Code: 2ATX7 Product Code: MBCWB01
Latest application date: 2019-07-15
FCC ID Device Details
| FCC ID | 2ATX7-MBC-WB01 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2ATX7 |
| Product Code | MBCWB01 |
| Applicant Business | Meteca SA 🇨🇭 |
| Related Domains |  cer-mark.com |
| Equipment Class | MBC-WB |
| Test Firm | Shenzhen HUAK Testing Technology Co., Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Original Equipment | 2019-07-15 |
| 2402-2480 MHz | Original Equipment | 2019-07-15 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User manual | Users Manual | 2019-07-15 | PDF 861.6 KB |
| Internal photos | Internal Photos | 2019-07-15 | PDF 863.9 KB |
| External photos | External Photos | 2019-07-15 | PDF 563.2 KB |
| ID label and location | ID Label/Location Info | 2019-07-15 | PDF 216.1 KB |
| Test setup photos | Test Setup Photos | 2019-07-15 | PDF 252.2 KB |
| Test reports | Test Report | 2019-07-15 | PDF 1.5 MB |
| Test reports | Test Report | 2019-07-15 | PDF 3.9 MB |
| Confidentiality | Cover Letter(s) | 2019-07-15 | PDF 98.6 KB |
| Letter Authorization | Cover Letter(s) | 2019-07-15 | PDF 101.3 KB |
| Modular Approval | Cover Letter(s) | 2019-07-15 | PDF 112.8 KB |
| RF Exposure | RF Exposure Info | 2019-07-15 | PDF 77.8 KB |
| Block Diagram Metadata only | Block Diagram | PDF 294 KB | |
| Schematics Metadata only | Schematics | PDF 872.2 KB | |
| Operational Description Metadata only | Operational Description | PDF 110 KB |
Application Information
| Application ID | ZUmV4Bfv6cDEEY17OzaAkw== |
|---|---|
| Final Action Date | 2019-07-15 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0028637072 |
| Model | MBC-WB01 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | MBC-WB |
| Responsible Party | Dario Trimarchi, Research & Development manager, yh_ect@126.com  , 13510170171 |
| Technical Contact | Jason Zhou, Shenzhen HUAK Testing Technology Co., Ltd., jason@cer-mark.com , 0755-23029901 |
| Non-Technical Contact | Jason Zhou, Shenzhen HUAK Testing Technology Co., Ltd., jason@cer-mark.com , 0755-23029901 |
| Test Firm | Jason Zhou, Shenzhen HUAK Testing Technology Co., Ltd., jason@cer-mark.com , +86-755-23029901 |
| TCB Email | elabscert@applus.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single modular approval. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End-users must be provided with operating procedures for satisfying RF exposure compliance. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| ZUmV4Bfv6cDEEY17OzaAkw== | 2019-07-15 | Original Equipment |
| 1wNhem+Rq2X1+ePUmCTeTQ== | 2019-07-15 | Original Equipment |
Grants
TCB Grant - Application ZUmV4Bfv6cDEEY17OzaAkw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
LGAI Technological Center S.A. (APPLUS) Ronda de la Font del Carme, s/n <BR>P.O. Box 08193, Barcelona, Spain |
Date of Grant: 07/15/2019 Application Dated: 07/15/2019 |
| Meteca SA |
| Via alla Torre 2, |
| 6850 Mendrisio, Switzerland |
| Attention: Dario Trimarchi , Research & Development manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ATX7-MBC-WB01 |
| Name of Grantee: | Meteca SA |
| Equipment Class: | Digital Transmission System |
| Notes: | MBC-WB |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.02307 |
| Single modular approval. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End-users must be provided with operating procedures for satisfying RF exposure compliance. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application ZUmV4Bfv6cDEEY17OzaAkw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Meteca SA Via alla Torre 2, 6850 Mendrisio, Switzerland |
Date of Grant: 07/15/2019 Application Dated: 07/15/2019 |
| Attention: Dario Trimarchi , Research & Development manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ATX7-MBC-WB01 |
| Name of Grantee: | Meteca SA |
| Equipment Class: | Digital Transmission System |
| Notes: | MBC-WB |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.02307 |
| Single modular approval. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End-users must be provided with operating procedures for satisfying RF exposure compliance. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
LGAI Technological Center S.A. (APPLUS) Ronda de la Font del Carme, s/n <BR>P.O. Box 08193, Barcelona, Spain |
Date of Grant: 07/15/2019 Application Dated: 07/15/2019 |
| Meteca SA |
| Via alla Torre 2, |
| 6850 Mendrisio, Switzerland |
| Attention: Dario Trimarchi , Research & Development manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ATX7-MBC-WB01 |
| Name of Grantee: | Meteca SA |
| Equipment Class: | Part 15 Low Power Communication Device Transmitter |
| Notes: | MBC-WB |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 |
| Single modular approval. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 1wNhem+Rq2X1+ePUmCTeTQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Meteca SA Via alla Torre 2, 6850 Mendrisio, Switzerland |
Date of Grant: 07/15/2019 Application Dated: 07/15/2019 |
| Attention: Dario Trimarchi , Research & Development manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ATX7-MBC-WB01 |
| Name of Grantee: | Meteca SA |
| Equipment Class: | Part 15 Low Power Communication Device Transmitter |
| Notes: | MBC-WB |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 |
| Single modular approval. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |