FCC ID 2ATY8-IPASONP3

Notebook Computer

by Wuhan Ipason Technology Co., Ltd

Grantee Code: 2ATY8   Product Code: IPASONP3
Latest application date: 2023-04-10

FCC ID Device Details

FCC ID2ATY8-IPASONP3
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2ATY8
Product CodeIPASONP3
Applicant BusinessWuhan Ipason Technology Co., Ltd 🇨🇳
Related Domains qytexting.com
Equipment ClassNotebook Computer
Test FirmBeijing TIRT Technology Service Co.,Ltd Shenzhen

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2023-04-10
2402-2480 MHzOriginal Equipment2023-04-10
2402-2480 MHzOriginal Equipment2023-04-10

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2023-04-10PDF 2.3 MB
User manualUsers Manual2023-04-10PDF 2.3 MB
Internal PhotosInternal Photos2023-04-10PDF 2.6 MB
External PhotosExternal Photos2023-04-10PDF 1.4 MB
External photosExternal Photos2023-04-10PDF 1.4 MB
Label LocationID Label/Location Info2023-04-10PDF 153.7 KB
label&label locationID Label/Location Info2023-04-10PDF 153.7 KB
2.911 (d)(5)(ii)CertificiationApplicantv1.2Block Diagram2023-04-10PDF 337 KB
Test Setup PhotosTest Setup Photos2023-04-10PDF 250.7 KB
Antenna gainTest Report2023-04-10PDF 955.9 KB
Test ReportTest Report2023-04-10PDF 1.2 MB
Test ReportTest Report2023-04-10PDF 3.7 MB
Test ReportTest Report2023-04-10PDF 2 MB
Test Report SARRF Exposure Info2023-04-10PDF 1.5 MB
2.911 (d)(7)USAgentforServiceofProcessv1.2Attestation Statements2023-04-10PDF 292.9 KB
2.911_(d)(5)(i)CertificationEquipmentTypev1.2Attestation Statements2023-04-10PDF 351 KB
2.911_(d)(5)(ii)CertificiationApplicantv1.2Attestation Statements2023-04-10PDF 337 KB
2.911_(d)(7) US Agent for Service of Process v1.2Attestation Statements2023-04-10PDF 292.9 KB
2911_(d)(5)(i) Certification Equipment Type v12Attestation Statements2023-04-10PDF 351 KB
2911_(d)(5)(ii) Certificiation Applicant v12Attestation Statements2023-04-10PDF 337 KB
Agent Authorization Rev 1.0Cover Letter(s)2023-04-10PDF 85.6 KB
AgentAuthorizationRev1.0Cover Letter(s)2023-04-10PDF 85.6 KB
FCC Long Term Only Confidentiality Request Rev4.1Cover Letter(s)2023-04-10PDF 190.9 KB
FCC Short_Long Term Confidentiality Request Rev4.1Cover Letter(s)2023-04-10PDF 190.9 KB
FCC Software Configuration Control Declaration Rev1.0Cover Letter(s)2023-04-10PDF 259.9 KB
Long_Term_ConfidentialityCover Letter(s)2023-04-10PDF 190.9 KB
Block Metadata onlyBlock DiagramPDF 616.5 KB
Block Diagram Metadata onlyBlock DiagramPDF 616.5 KB
SCH Metadata onlySchematicsPDF 1.4 MB
OP Metadata onlyOperational DescriptionPDF 242.1 KB
FCC Software Security Requirements for UNII devices Rev 2.1 Metadata onlySDR Software/Security InfPDF 368.2 KB

Application Information

Application IDtWS5xsfmp6V1kyt8raJYGg==
Final Action Date2023-04-10
Application PurposeOriginal Equipment
Applicant FRN0028642650
ModelIPASONP3
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionNotebook Computer
Responsible PartyKATY LAU, engineer, kitty@qytexting.com , +86-13532691034
Technical ContactWuhan Ipason Technology Co., Ltd, Kitty@qytexting.com
Test FirmQuan Chen, Beijing TIRT Technology Service Co.,Ltd Shenzhen, chenquan@tirt.com.cn , +86 150 0208024
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 0 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn and simultaneous transmission use conditions is 0.19W/kg and 0.24W/kg respectively.

Applications

Application IDDatePurpose
tWS5xsfmp6V1kyt8raJYGg==2023-04-10Original Equipment
I7dVL8FvaXj3sCDqMcRhqw==2023-04-10Original Equipment
9BUC5eRMRSeQ92lZ7JTPfQ==2023-04-10Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.00415CCC
2402-2480 MHz0.004800015CCC
2412-2462 MHz0.032415CCC
5180-5240 MHz0.026115ECC
5745-5825 MHz0.02815ECC

Grants

TCB Grant - Application tWS5xsfmp6V1kyt8raJYGg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 04/10/2023

Application Dated: 04/10/2023
Wuhan Ipason Technology Co., Ltd
5th Floor, Multifunctional Building, No. 1, Ipason
Avenue, Shekou Street, Huangpi District,
Wuhan,
China
 
Attention: KATY LAU , engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ATY8-IPASONP3
Name of Grantee:  Wuhan Ipason Technology Co., Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Notebook Computer
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0261  
CC 15E 5745.0  -  5825.0 0.028  

Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 0 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn and simultaneous transmission use conditions is 0.19W/kg and 0.24W/kg respectively.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application tWS5xsfmp6V1kyt8raJYGg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Wuhan Ipason Technology Co., Ltd
5th Floor, Multifunctional Building, No. 1, Ipason Avenue, Shekou Street, Huangpi District,
Wuhan,
China
  Date of Grant: 04/10/2023

Application Dated: 04/10/2023
 
Attention: KATY LAU , engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ATY8-IPASONP3
Name of Grantee:  Wuhan Ipason Technology Co., Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Notebook Computer
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0261  
CC 15E 5745.0  -  5825.0 0.028  

Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 0 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn and simultaneous transmission use conditions is 0.19W/kg and 0.24W/kg respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application I7dVL8FvaXj3sCDqMcRhqw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 04/10/2023

Application Dated: 04/10/2023
Wuhan Ipason Technology Co., Ltd
5th Floor, Multifunctional Building, No. 1, Ipason
Avenue, Shekou Street, Huangpi District,
Wuhan,
China
 
Attention: KATY LAU , engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ATY8-IPASONP3
Name of Grantee:  Wuhan Ipason Technology Co., Ltd
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Notebook Computer
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0048  

Output power listed is conducted power. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 0 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn and simultaneous transmission use conditions is 0.05W/kg and 0.24W/kg respectively.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application I7dVL8FvaXj3sCDqMcRhqw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Wuhan Ipason Technology Co., Ltd
5th Floor, Multifunctional Building, No. 1, Ipason Avenue, Shekou Street, Huangpi District,
Wuhan,
China
  Date of Grant: 04/10/2023

Application Dated: 04/10/2023
 
Attention: KATY LAU , engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ATY8-IPASONP3
Name of Grantee:  Wuhan Ipason Technology Co., Ltd
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Notebook Computer
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0048  

Output power listed is conducted power. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 0 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn and simultaneous transmission use conditions is 0.05W/kg and 0.24W/kg respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 9BUC5eRMRSeQ92lZ7JTPfQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 04/10/2023

Application Dated: 04/10/2023
Wuhan Ipason Technology Co., Ltd
5th Floor, Multifunctional Building, No. 1, Ipason
Avenue, Shekou Street, Huangpi District,
Wuhan,
China
 
Attention: KATY LAU , engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ATY8-IPASONP3
Name of Grantee:  Wuhan Ipason Technology Co., Ltd
Equipment Class: Digital Transmission System
Notes: Notebook Computer
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.004  
CC 15C 2412.0  -  2462.0 0.0324  

Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 0 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn and simultaneous transmission use conditions is 0.18W/kg and 0.24W/kg respectively.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 9BUC5eRMRSeQ92lZ7JTPfQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Wuhan Ipason Technology Co., Ltd
5th Floor, Multifunctional Building, No. 1, Ipason Avenue, Shekou Street, Huangpi District,
Wuhan,
China
  Date of Grant: 04/10/2023

Application Dated: 04/10/2023
 
Attention: KATY LAU , engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ATY8-IPASONP3
Name of Grantee:  Wuhan Ipason Technology Co., Ltd
Equipment Class: Digital Transmission System
Notes: Notebook Computer
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.004  
CC 15C 2412.0  -  2462.0 0.0324  

Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 0 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn and simultaneous transmission use conditions is 0.18W/kg and 0.24W/kg respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: