1. FCC ID
  2. 2ATZ4
  3. 2ATZ4-RP01X

FCC ID 2ATZ4-RP01X

RP01

by Shenzhen Youmi Intelligent Technology Co., Ltd.

Grantee Code: 2ATZ4   Product Code: RP01X
Latest application date: 2021-11-21

FCC ID Device Details

FCC ID2ATZ4-RP01X
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2ATZ4
Product CodeRP01X
Applicant BusinessShenzhen Youmi Intelligent Technology Co., Ltd. 🇨🇳
Related Domains umidigi.com
Equipment ClassRP01
Test FirmShenzhen Accurate Technology Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2021-11-21
5180-5240 MHzOriginal Equipment2021-11-21
13.56 MHzOriginal Equipment2021-11-21
699.7-715.3 MHzOriginal Equipment2021-11-21
2402-2480 MHzOriginal Equipment2021-11-21

Exhibits

DocumentTypeAvailableFile
User Manual-Part 1Users Manual2021-11-21PDF 5 MB
User Manual-Part 2Users Manual2021-11-21PDF 5.5 MB
Int PhotosInternal Photos2021-11-21PDF 2.8 MB
Ext PhotosExternal Photos2021-11-21PDF 578.2 KB
FCC ID LabelID Label/Location Info2021-11-21PDF 215.8 KB
Setup PhotosTest Setup Photos2021-11-21PDF 577.9 KB
Setup PhotosTest Setup Photos2021-11-21PDF 425.7 KB
Test ReportTest Report2021-11-21PDF 1.5 MB
Test ReportTest Report2021-11-21PDF 5.3 MB
Test ReportTest Report2021-11-21PDF 5 MB
Test ReportTest Report2021-11-21PDF 3.2 MB
Test Report Appendix ATest Report2021-11-21PDF 5 MB
Test Report Appendix BTest Report2021-11-21PDF 4.5 MB
Test Report Appendix CTest Report2021-11-21PDF 5 MB
Test Report Part 1Test Report2021-11-21PDF 3 MB
Test Report Part 2Test Report2021-11-21PDF 4.6 MB
Attestation LetterAttestation Statements2021-11-21PDF 15.9 KB
Confidential LetterCover Letter(s)2021-11-21PDF 81 KB
POACover Letter(s)2021-11-21PDF 16.6 KB
Product Similarity DeclarationCover Letter(s)2021-11-21PDF 200.1 KB
SAR Report Metadata onlyRF Exposure Info2021-11-21PDF 1.5 MB
SAR Report Appendix 1RF Exposure Info2021-11-21PDF 4.3 MB
SAR Report Appendix 2 Metadata onlyRF Exposure Info2021-11-21PDF 2.4 MB
SAR Report Appendix 2 RevRF Exposure Info2021-11-21PDF 2 MB
SAR Report Appendix 3RF Exposure Info2021-11-21PDF 609.8 KB
SAR Report RevRF Exposure Info2021-11-21PDF 1.8 MB
Block Diagram Metadata onlyBlock DiagramPDF 74.2 KB
Schematics Metadata onlySchematicsPDF 860.7 KB
Operation Description Metadata onlyOperational DescriptionPDF 142.6 KB
Software Security Declaration Metadata onlyOperational DescriptionPDF 233 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 202.5 KB
Tune up Procedure Metadata onlyParts List/Tune Up InfoPDF 215.7 KB

Application Information

Application IDtNlOPeSYOftzsZM022gseA==
Final Action Date2021-11-21
Application PurposeOriginal Equipment
Applicant FRN0028652048
ModelRP01X
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionRP01
Responsible Partywang kun, wangkun@umidigi.com , 86-075583220991
Test FirmLisa Zhang, Shenzhen Accurate Technology Co., Ltd., qa@atc-lab.com , +86-755-26503290
TCB Emailbacl.regulatory@baclcorp.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is peak conducted. The antenna(s) used for this transmitter must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The device supports 20 MHz and 40 MHz bandwidth modes.

Applications

Application IDDatePurpose
tNlOPeSYOftzsZM022gseA==2021-11-21Original Equipment
iTUtmv2UR0pN7JOHdlkYXA==2021-11-21Original Equipment
9NYESu7ne2on6m08H3RCkg==2021-11-21Original Equipment
6suN1wf4iBleJExjeEwOWg==2021-11-21Original Equipment
12dn4EeTnDEJX/FmEH2fhA==2021-11-21Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
13.56 MHz15CCC
699.7-715.3 MHz0.1162.5ppm1M10G7D27
699.7-715.3 MHz0.0952.5ppm1M10D7W27
704-711 MHz0.1132.5ppm8M98G7D27
704-711 MHz0.1032.5ppm8M98D7W27
782 MHz0.1172.5ppm8M98G7D27
782 MHz0.0972.5ppm8M94D7W27
826.4-846.6 MHz0.0922.5ppm4M20F9W22H
1710.7-1754.3 MHz0.2152.5ppm1M10D7W27
1710.7-1754.3 MHz0.2722.5ppm1M10G7D27
1720-1745 MHz0.2642.5ppm18M0G7D27
1720-1745 MHz0.2382.5ppm18M0D7W27
1850.2-1909.8 MHz1.252.5ppm245KGXW24E
1850.2-1909.8 MHz0.5752.5ppm252KG7W24E
1852.4-1907.6 MHz0.272.5ppm4M18F9W24E
1860-1900 MHz0.3742.5ppm18M0G7D24E
1860-1900 MHz0.3272.5ppm18M0D7W24E
2402-2480 MHz0.001000015CCC
2402-2480 MHz0.00315CCC
2412-2472 MHz0.02515CCC
2560-2650 MHz0.2072.5ppm8M98G7D27
2560-2650 MHz0.1612.5ppm8M94D7W27
2565-2645 MHz0.1962.5ppm18M0G7D27
2565-2645 MHz0.1632.5ppm18M0D7W27
5180-5240 MHz0.01915ECC
5745-5825 MHz0.00915ECC

Grants

TCB Grant - Application tNlOPeSYOftzsZM022gseA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
 Date of Grant: 11/21/2021

Application Dated: 11/21/2021
Shenzhen Youmi Intelligent Technology Co., Ltd.
406-407 Jinqi Zhigu Building,4/F,1 Tangling Road
Nanshan District,Shenzhen China
Shenzhen,
China
 
Attention: wang kun

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ATZ4-RP01X
Name of Grantee:  Shenzhen Youmi Intelligent Technology Co., Ltd.
Equipment Class: Digital Transmission System
Notes: RP01
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.003  
CC 15C 2412.0  -  2472.0 0.025  

Output power listed is peak conducted. The antenna(s) used for this transmitter must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The device supports 20 MHz and 40 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application tNlOPeSYOftzsZM022gseA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Shenzhen Youmi Intelligent Technology Co., Ltd.
406-407 Jinqi Zhigu Building,4/F,1 Tangling Road Nanshan District,Shenzhen China
Shenzhen,
China 		  Date of Grant: 11/21/2021

Application Dated: 11/21/2021
 
Attention: wang kun

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ATZ4-RP01X
Name of Grantee:  Shenzhen Youmi Intelligent Technology Co., Ltd.
Equipment Class: Digital Transmission System
Notes: RP01
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.003  
CC 15C 2412.0  -  2472.0 0.025  

Output power listed is peak conducted. The antenna(s) used for this transmitter must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. The device supports 20 MHz and 40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application iTUtmv2UR0pN7JOHdlkYXA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
 Date of Grant: 11/21/2021

Application Dated: 11/21/2021
Shenzhen Youmi Intelligent Technology Co., Ltd.
406-407 Jinqi Zhigu Building,4/F,1 Tangling Road
Nanshan District,Shenzhen China
Shenzhen,
China
 
Attention: wang kun

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ATZ4-RP01X
Name of Grantee:  Shenzhen Youmi Intelligent Technology Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: RP01
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5240.0 0.019  
CC 15E 5745.0  -  5825.0 0.009  

Output power listed is conducted. SAR compliance for body-worn operating conditions is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 10 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, and simultaneous transmission use conditions are 0.54 W/kg, 0.54 W/kg, and 1.13 W/kg, respectively. This device supports 20 MHz, 40 MHz and 80 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application iTUtmv2UR0pN7JOHdlkYXA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Shenzhen Youmi Intelligent Technology Co., Ltd.
406-407 Jinqi Zhigu Building,4/F,1 Tangling Road Nanshan District,Shenzhen China
Shenzhen,
China 		  Date of Grant: 11/21/2021

Application Dated: 11/21/2021
 
Attention: wang kun

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ATZ4-RP01X
Name of Grantee:  Shenzhen Youmi Intelligent Technology Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: RP01
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5240.0 0.019  
CC 15E 5745.0  -  5825.0 0.009  

Output power listed is conducted. SAR compliance for body-worn operating conditions is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 10 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, and simultaneous transmission use conditions are 0.54 W/kg, 0.54 W/kg, and 1.13 W/kg, respectively. This device supports 20 MHz, 40 MHz and 80 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 9NYESu7ne2on6m08H3RCkg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
 Date of Grant: 11/21/2021

Application Dated: 11/21/2021
Shenzhen Youmi Intelligent Technology Co., Ltd.
406-407 Jinqi Zhigu Building,4/F,1 Tangling Road
Nanshan District,Shenzhen China
Shenzhen,
China
 
Attention: wang kun

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ATZ4-RP01X
Name of Grantee:  Shenzhen Youmi Intelligent Technology Co., Ltd.
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: RP01
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 13.56  -  13.56  


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 9NYESu7ne2on6m08H3RCkg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Shenzhen Youmi Intelligent Technology Co., Ltd.
406-407 Jinqi Zhigu Building,4/F,1 Tangling Road Nanshan District,Shenzhen China
Shenzhen,
China 		  Date of Grant: 11/21/2021

Application Dated: 11/21/2021
 
Attention: wang kun

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ATZ4-RP01X
Name of Grantee:  Shenzhen Youmi Intelligent Technology Co., Ltd.
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: RP01
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 13.56  -  13.56  


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 6suN1wf4iBleJExjeEwOWg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
 Date of Grant: 11/21/2021

Application Dated: 11/21/2021
Shenzhen Youmi Intelligent Technology Co., Ltd.
406-407 Jinqi Zhigu Building,4/F,1 Tangling Road
Nanshan District,Shenzhen China
Shenzhen,
China
 
Attention: wang kun

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ATZ4-RP01X
Name of Grantee:  Shenzhen Youmi Intelligent Technology Co., Ltd.
Equipment Class: PCS Licensed Transmitter held to ear
Notes: RP01
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 0.889 2.5  PM 245KGXW
22H 824.2  -  848.8 0.207 2.5  PM 250KG7W
22H 826.4  -  846.6 0.092 2.5  PM 4M20F9W
24E 1850.2  -  1909.8 1.25 2.5  PM 245KGXW
24E 1850.2  -  1909.8 0.575 2.5  PM 252KG7W
24E 1852.4  -  1907.6 0.27 2.5  PM 4M18F9W
24E 1860.0  -  1900.0 0.374 2.5  PM 18M0G7D
24E 1860.0  -  1900.0 0.327 2.5  PM 18M0D7W
27 1710.7  -  1754.3 0.272 2.5  PM 1M10G7D
27 1710.7  -  1754.3 0.215 2.5  PM 1M10D7W
27 1720.0  -  1745.0 0.264 2.5  PM 18M0G7D
27 1720.0  -  1745.0 0.238 2.5  PM 18M0D7W
27 699.7  -  715.3 0.116 2.5  PM 1M10G7D
27 699.7  -  715.3 0.095 2.5  PM 1M10D7W
27 704.0  -  711.0 0.113 2.5  PM 8M98G7D
27 704.0  -  711.0 0.103 2.5  PM 8M98D7W
27 782.0  -  782.0 0.117 2.5  PM 8M98G7D
27 782.0  -  782.0 0.097 2.5  PM 8M94D7W
27 2560.0  -  2650.0 0.207 2.5  PM 8M98G7D
27 2560.0  -  2650.0 0.161 2.5  PM 8M94D7W
27 2565.0  -  2645.0 0.196 2.5  PM 18M0G7D
27 2565.0  -  2645.0 0.163 2.5  PM 18M0D7W

Output power listed is ERP for operation below 1 GHz and EIRP for operation above 1 GHz. LTE supports 1.4/3/5/10/15/20 MHz BW modes in Band 2/4, 1.4/3/5/10 MHz BW modes in Band 12, 5/10 MHz BW modes in Band 13, and 5/10/15/20 MHz BW modes in Band 41. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 10 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific, and simultaneous transmission exposure conditions are 0.74 W/kg, 0.53 W/kg, 1.07 W/kg, and 1.13 W/kg, respectively.

This device contains functions that are not operational in U.S Territories. This filing is only applicable for US operations.


EAS Grant - Application 6suN1wf4iBleJExjeEwOWg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Shenzhen Youmi Intelligent Technology Co., Ltd.
406-407 Jinqi Zhigu Building,4/F,1 Tangling Road Nanshan District,Shenzhen China
Shenzhen,
China 		  Date of Grant: 11/21/2021

Application Dated: 11/21/2021
 
Attention: wang kun

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ATZ4-RP01X
Name of Grantee:  Shenzhen Youmi Intelligent Technology Co., Ltd.
Equipment Class: PCS Licensed Transmitter held to ear
Notes: RP01
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 0.889 2.5  PM 245KGXW
22H 824.2  -  848.8 0.207 2.5  PM 250KG7W
22H 826.4  -  846.6 0.092 2.5  PM 4M20F9W
24E 1850.2  -  1909.8 1.25 2.5  PM 245KGXW
24E 1850.2  -  1909.8 0.575 2.5  PM 252KG7W
24E 1852.4  -  1907.6 0.27 2.5  PM 4M18F9W
24E 1860.0  -  1900.0 0.374 2.5  PM 18M0G7D
24E 1860.0  -  1900.0 0.327 2.5  PM 18M0D7W
27 1710.7  -  1754.3 0.272 2.5  PM 1M10G7D
27 1710.7  -  1754.3 0.215 2.5  PM 1M10D7W
27 1720.0  -  1745.0 0.264 2.5  PM 18M0G7D
27 1720.0  -  1745.0 0.238 2.5  PM 18M0D7W
27 699.7  -  715.3 0.116 2.5  PM 1M10G7D
27 699.7  -  715.3 0.095 2.5  PM 1M10D7W
27 704.0  -  711.0 0.113 2.5  PM 8M98G7D
27 704.0  -  711.0 0.103 2.5  PM 8M98D7W
27 782.0  -  782.0 0.117 2.5  PM 8M98G7D
27 782.0  -  782.0 0.097 2.5  PM 8M94D7W
27 2560.0  -  2650.0 0.207 2.5  PM 8M98G7D
27 2560.0  -  2650.0 0.161 2.5  PM 8M94D7W
27 2565.0  -  2645.0 0.196 2.5  PM 18M0G7D
27 2565.0  -  2645.0 0.163 2.5  PM 18M0D7W

Output power listed is ERP for operation below 1 GHz and EIRP for operation above 1 GHz. LTE supports 1.4/3/5/10/15/20 MHz BW modes in Band 2/4, 1.4/3/5/10 MHz BW modes in Band 12, 5/10 MHz BW modes in Band 13, and 5/10/15/20 MHz BW modes in Band 41. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 10 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific, and simultaneous transmission exposure conditions are 0.74 W/kg, 0.53 W/kg, 1.07 W/kg, and 1.13 W/kg, respectively.

This device contains functions that are not operational in U.S Territories. This filing is only applicable for US operations.



TCB Grant - Application 12dn4EeTnDEJX/FmEH2fhA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
 Date of Grant: 11/21/2021

Application Dated: 11/21/2021
Shenzhen Youmi Intelligent Technology Co., Ltd.
406-407 Jinqi Zhigu Building,4/F,1 Tangling Road
Nanshan District,Shenzhen China
Shenzhen,
China
 
Attention: wang kun

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ATZ4-RP01X
Name of Grantee:  Shenzhen Youmi Intelligent Technology Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: RP01
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.001  

Output power listed is conducted.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 12dn4EeTnDEJX/FmEH2fhA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Shenzhen Youmi Intelligent Technology Co., Ltd.
406-407 Jinqi Zhigu Building,4/F,1 Tangling Road Nanshan District,Shenzhen China
Shenzhen,
China 		  Date of Grant: 11/21/2021

Application Dated: 11/21/2021
 
Attention: wang kun

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ATZ4-RP01X
Name of Grantee:  Shenzhen Youmi Intelligent Technology Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: RP01
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.001  

Output power listed is conducted.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: