FCC ID 2AU8HMGM5608A

LTE Module

by Smawave Technology Co. ,Ltd

Grantee Code: 2AU8H   Product Code: MGM5608A
Latest application date: 2020-04-13

FCC ID Device Details

FCC ID2AU8HMGM5608A
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AU8H
Product CodeMGM5608A
Applicant BusinessSmawave Technology Co. ,Ltd 🇨🇳
Related Domains smawave.com
Equipment ClassLTE Module
Test FirmTA Technology (Shanghai) Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5725-5850 MHzOriginal Equipment2020-04-13

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2020-04-13PDF 235.4 KB
Internal PhotosInternal Photos2020-04-13PDF 409.2 KB
External PhotosExternal Photos2020-04-13PDF 258.1 KB
Label InfoID Label/Location Info2020-04-13PDF 170.9 KB
Test Setup Photos_JBPTest Setup Photos2020-04-13PDF 259.5 KB
Test Setup Photos_NIITest Setup Photos2020-04-13PDF 264.2 KB
Test Report_JBPTest Report2020-04-13PDF 399.9 KB
Test Report_NIITest Report2020-04-13PDF 3 MB
Confidentiality LetterCover Letter(s)2020-04-13PDF 52.4 KB
Modular Approval LetterCover Letter(s)2020-04-13PDF 162.8 KB
Module Approval ChecklistCover Letter(s)2020-04-13PDF 162.8 KB
POACover Letter(s)2020-04-13PDF 66.6 KB
MPE_NIIRF Exposure Info2020-04-13PDF 259.6 KB
Block Diagram Metadata onlyBlock DiagramPDF 269.2 KB
Schematics Metadata onlySchematicsPDF 420 KB
Operational Description Metadata onlyOperational DescriptionPDF 60.1 KB
Unrestricted Operational Description Metadata onlyOperational DescriptionPDF 242.4 KB
Unrestricted Protocol Decription Metadata onlyOperational DescriptionPDF 242.4 KB
Software-Security-Requirements Metadata onlySDR Software/Security InfPDF 139.4 KB
BOM and Parts List Metadata onlyParts List/Tune Up InfoPDF 90.3 KB
Tune up Procedure Metadata onlyParts List/Tune Up InfoPDF 77.2 KB
Tune up procedure Metadata onlyParts List/Tune Up InfoPDF 77.2 KB

Application Information

Application IDUZ0JontVQb2wjZnGl9LPvA==
Final Action Date2020-04-13
Application PurposeOriginal Equipment
Applicant FRN0029004884
ModelMGM5608A
Frequency Range5725-5850 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionLTE Module
Responsible PartyLeven Liang, Certification engineer, leven.liang@smawave.com , 13956549394
Test FirmMr. Zhihui Liu, TA Technology (Shanghai) Co., Ltd., liuzhihui@ta-shanghai.com , 86-21-50791141
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Modular Approval. Power listed is combined maximum conducted output power. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. Device operates with specific antennas in MIMO configurations as described in this filing. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must not exceed the gain of 3 dBi.

Applications

Application IDDatePurpose
UZ0JontVQb2wjZnGl9LPvA==2020-04-13Original Equipment
UGwvqAjkXrx9Yfd6YN7/+w==2020-04-13Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
15BCC
5725-5850 MHz0.131000015ECC

Grants

TCB Grant - Application UZ0JontVQb2wjZnGl9LPvA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 04/13/2020

Application Dated: 04/13/2020
Smawave Technology Co. ,Ltd
3F Building 8 1001 North Qinzhou Road
Xuhui District
Shanghai,
China
 
Attention: Leven Liang , Certification engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AU8HMGM5608A
Name of Grantee:  Smawave Technology Co. ,Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5725.0  -  5850.0 0.131  

Single Modular Approval. Power listed is combined maximum conducted output power. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. Device operates with specific antennas in MIMO configurations as described in this filing. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must not exceed the gain of 3 dBi.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application UZ0JontVQb2wjZnGl9LPvA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Smawave Technology Co. ,Ltd
3F Building 8 1001 North Qinzhou Road Xuhui District
Shanghai,
China
  Date of Grant: 04/13/2020

Application Dated: 04/13/2020
 
Attention: Leven Liang , Certification engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AU8HMGM5608A
Name of Grantee:  Smawave Technology Co. ,Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5725.0  -  5850.0 0.131  

Single Modular Approval. Power listed is combined maximum conducted output power. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. Device operates with specific antennas in MIMO configurations as described in this filing. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must not exceed the gain of 3 dBi.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application UGwvqAjkXrx9Yfd6YN7/+w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 04/13/2020

Application Dated: 04/13/2020
Smawave Technology Co. ,Ltd
3F Building 8 1001 North Qinzhou Road
Xuhui District
Shanghai,
China
 
Attention: Leven Liang , Certification engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AU8HMGM5608A
Name of Grantee:  Smawave Technology Co. ,Ltd
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application UGwvqAjkXrx9Yfd6YN7/+w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Smawave Technology Co. ,Ltd
3F Building 8 1001 North Qinzhou Road Xuhui District
Shanghai,
China
  Date of Grant: 04/13/2020

Application Dated: 04/13/2020
 
Attention: Leven Liang , Certification engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AU8HMGM5608A
Name of Grantee:  Smawave Technology Co. ,Ltd
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: