1. FCC ID
  2. 2AUBP
  3. 2AUBP-5776AH

FCC ID 2AUBP-5776AH

LTE-FDD/HSPA MODULE

by CONEXIO corporation

Grantee Code: 2AUBP   Product Code: 5776AH
Latest application date: 2019-10-09

FCC ID Device Details

FCC ID2AUBP-5776AH
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AUBP
Product Code5776AH
Applicant BusinessCONEXIO corporation 🇯🇵
Related Domains conexio.co.jp
Equipment ClassLTE-FDD/HSPA MODULE
Test FirmBureau Veritas CPS(H.K.) Ltd., Taoyuan Branch

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
700.5-714.5 MHzClass II permissive change or modification of presently authorized equipment2019-10-09
700.5-714.5 MHzChange in identification of presently authorized equipment. Original FCC ID: UDV-201710 Grant Date: 12/19/20172019-09-12

Exhibits

DocumentTypeAvailableFile
Internal photosInternal Photos2020-04-07PDF 2.1 MB
External photoExternal Photos2020-04-07PDF 1,022.1 KB
External photosExternal Photos2020-03-11PDF 391 KB
LabelID Label/Location Info2019-10-09PDF 76 KB
Label LocationID Label/Location Info2019-10-09PDF 166 KB
Label and locationID Label/Location Info2019-09-12PDF 71.5 KB
RF Test set-up PhotoTest Setup Photos2020-04-07PDF 1 MB
RF Test Report -22Test Report2019-10-09PDF 591.9 KB
RF Test Report -24Test Report2019-10-09PDF 1.3 MB
RF Test Report -27Test Report2019-10-09PDF 1.7 MB
Agent Authorization LetterCover Letter(s)2019-10-09PDF 197.4 KB
Authorization LetterCover Letter(s)2019-10-09PDF 147.2 KB
Class II Permissive Change Request LetterCover Letter(s)2019-10-09PDF 381.9 KB
STC LetterCover Letter(s)2019-10-09PDF 247 KB
Agent Authorization LetterCover Letter(s)2019-09-12PDF 205.2 KB
Change ID Authorization letterCover Letter(s)2019-09-12PDF 46.6 KB
Change ID Request LetterCover Letter(s)2019-09-12PDF 241.7 KB
STC LetterCover Letter(s)2019-09-12PDF 225 KB
RF Exposure ReportRF Exposure Info2019-10-09PDF 231.4 KB

Application Information

Application IDuUdywLWnwBoPEaZMr1tN3g==
Final Action Date2019-10-09
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0028733558
Model5776AH
Frequency Range700.5-714.5 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionLTE-FDD/HSPA MODULE
Responsible PartyTomoki Higashitani, Manager, higashitani.tomoki@conexio.co.jp , 81353313677
Test FirmEric Lin, Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch, eric-wp.lin@tw.bureauveritas.com , +886-3-2641570
TCB Emailtcb@siemic.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
Short-Term ConfidentialityYes
Short-Term Confidentiality Date04/07/2020
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsThis is C2PC for adding a specific host (model: MS-5776-A-H, brand: Conexio) and antenna. Single Modular Approval. Power output is conducted at the antenna terminal. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install the SIM7600A-H module. This device contains LTE/WCDMA functions that are not operational in U.S. Territories. This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15MHz and 20 MHz bandwidth modes for LTE Band 2, 4 and 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Band 12. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

Applications

Application IDDatePurpose
uUdywLWnwBoPEaZMr1tN3g==2019-10-09Class II permissive change or modification of presently authorized equipment
vC3Os+VH4Z6CPuh7tc3tQA==2019-09-12Change in identification of presently authorized equipment. Original FCC ID: UDV-201710 Grant Date: 12/19/2017

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
700.5-714.5 MHz0.1750.1ppm2M68G7D27BC
701.5-713.5 MHz0.1980.1ppm4M46W7D27BC
704-711 MHz0.1980.1ppm8M89W7D27BC
704-711 MHz0.1750.1ppm4M48G7D27BC
1715-1750 MHz0.1820.1ppm8M94W7D27BC
1720-1745 MHz0.1580.1ppm4M50G7D27BC
1720-1745 MHz0.1770.1ppm17M9W7D27BC
1851.5-1908.5 MHz0.1560.1ppm2M69G7D24EBC
1852.4-1907.6 MHz0.1830.1ppm4M10F9W24EBC
1855-1905 MHz0.1580.1ppm8M99W7D24EBC
1855-1905 MHz0.1560.1ppm4M47G7D24EBC
1860-1900 MHz0.1570.1ppm17M9W7D24EBC
1860-1900 MHz0.1540.1ppm4M47G7D24EBC

Grants

TCB Grant - Application vC3Os+VH4Z6CPuh7tc3tQA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
 Date of Grant: 09/12/2019

Application Dated: 09/12/2019
CONEXIO corporation
Shinjuku Grand Tower
Shinjuku-ku Nishi-shinjyuku8-17-1
Tokyo, 160-6137
Japan
 
Attention: Tomoki Higashitani , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AUBP-5776AH
Name of Grantee:  CONEXIO corporation
Equipment Class: PCS Licensed Transmitter
Notes: LTE-FDD/HSPA MODULE
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC 22H 826.4  -  846.6 0.258 0.1  PM 4M15F9W
BC 24E 1852.4  -  1907.6 0.183 0.1  PM 4M10F9W
BC 24E 1855.0  -  1905.0 0.158 0.1  PM 8M99W7D
BC 24E 1860.0  -  1900.0 0.157 0.1  PM 17M9W7D
BC 24E 1851.5  -  1908.5 0.156 0.1  PM 2M69G7D
BC 24E 1855.0  -  1905.0 0.156 0.1  PM 4M47G7D
BC 24E 1860.0  -  1900.0 0.154 0.1  PM 4M47G7D
BC 27 1715.0  -  1750.0 0.182 0.1  PM 8M94W7D
BC 27 1720.0  -  1745.0 0.177 0.1  PM 17M9W7D
BC 27 1720.0  -  1745.0 0.158 0.1  PM 4M50G7D
BC 27 701.5  -  713.5 0.198 0.1  PM 4M46W7D
BC 27 704.0  -  711.0 0.198 0.1  PM 8M89W7D
BC 27 700.5  -  714.5 0.175 0.1  PM 2M68G7D
BC 27 704.0  -  711.0 0.175 0.1  PM 4M48G7D

Single Modular Approval. Power out is conducted at the antenna terminal. ERP for part 22/27 is 24.38 dBm/23.20 dBm and EIRP for part 24/27 is 24.45 dBm/23.69dBm. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install the SIM7600A-H module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 1.57 dBi at Lower 700 MHz, 1.87 dBi at 1900 MHz, 3.49 dBi at 1700 MHz, 0.91 at 850 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no condition may an antenna gain be used that would exceed the 7W erp Part 22, the 2W eirp Part 24 and the 3W erp/ 1W eirp Part 27, power limits.

This device contains LTE/WCDMA functions that are not operational in U.S. Territories. This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15MHz and 20 MHz bandwidth modes for LTE Band 2, 4 and 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Band 12.

This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

EAS Grant - Application vC3Os+VH4Z6CPuh7tc3tQA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

CONEXIO corporation
Shinjuku Grand Tower Shinjuku-ku Nishi-shinjyuku8-17-1
Tokyo, 160-6137
Japan 		  Date of Grant: 09/12/2019

Application Dated: 09/12/2019
 
Attention: Tomoki Higashitani , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AUBP-5776AH
Name of Grantee:  CONEXIO corporation
Equipment Class: PCS Licensed Transmitter
Notes: LTE-FDD/HSPA MODULE
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC 22H 826.4  -  846.6 0.258 0.1  PM 4M15F9W
BC 24E 1852.4  -  1907.6 0.183 0.1  PM 4M10F9W
BC 24E 1855.0  -  1905.0 0.158 0.1  PM 8M99W7D
BC 24E 1860.0  -  1900.0 0.157 0.1  PM 17M9W7D
BC 24E 1851.5  -  1908.5 0.156 0.1  PM 2M69G7D
BC 24E 1855.0  -  1905.0 0.156 0.1  PM 4M47G7D
BC 24E 1860.0  -  1900.0 0.154 0.1  PM 4M47G7D
BC 27 1715.0  -  1750.0 0.182 0.1  PM 8M94W7D
BC 27 1720.0  -  1745.0 0.177 0.1  PM 17M9W7D
BC 27 1720.0  -  1745.0 0.158 0.1  PM 4M50G7D
BC 27 701.5  -  713.5 0.198 0.1  PM 4M46W7D
BC 27 704.0  -  711.0 0.198 0.1  PM 8M89W7D
BC 27 700.5  -  714.5 0.175 0.1  PM 2M68G7D
BC 27 704.0  -  711.0 0.175 0.1  PM 4M48G7D

Single Modular Approval. Power out is conducted at the antenna terminal. ERP for part 22/27 is 24.38 dBm/23.20 dBm and EIRP for part 24/27 is 24.45 dBm/23.69dBm. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install the SIM7600A-H module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 1.57 dBi at Lower 700 MHz, 1.87 dBi at 1900 MHz, 3.49 dBi at 1700 MHz, 0.91 at 850 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no condition may an antenna gain be used that would exceed the 7W erp Part 22, the 2W eirp Part 24 and the 3W erp/ 1W eirp Part 27, power limits.

This device contains LTE/WCDMA functions that are not operational in U.S. Territories. This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15MHz and 20 MHz bandwidth modes for LTE Band 2, 4 and 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Band 12.

This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

TCB Grant - Application uUdywLWnwBoPEaZMr1tN3g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
 Date of Grant: 10/09/2019

Application Dated: 10/09/2019
CONEXIO corporation
Shinjuku Grand Tower
Shinjuku-ku Nishi-shinjyuku8-17-1
Tokyo, 160-6137
Japan
 
Attention: Tomoki Higashitani , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AUBP-5776AH
Name of Grantee:  CONEXIO corporation
Equipment Class: PCS Licensed Transmitter
Notes: LTE-FDD/HSPA MODULE
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC 22H 826.4  -  846.6 0.258 0.1  PM 4M15F9W
BC 24E 1852.4  -  1907.6 0.183 0.1  PM 4M10F9W
BC 24E 1855.0  -  1905.0 0.158 0.1  PM 8M99W7D
BC 24E 1860.0  -  1900.0 0.157 0.1  PM 17M9W7D
BC 24E 1851.5  -  1908.5 0.156 0.1  PM 2M69G7D
BC 24E 1855.0  -  1905.0 0.156 0.1  PM 4M47G7D
BC 24E 1860.0  -  1900.0 0.154 0.1  PM 4M47G7D
BC 27 1715.0  -  1750.0 0.182 0.1  PM 8M94W7D
BC 27 1720.0  -  1745.0 0.177 0.1  PM 17M9W7D
BC 27 1720.0  -  1745.0 0.158 0.1  PM 4M50G7D
BC 27 701.5  -  713.5 0.198 0.1  PM 4M46W7D
BC 27 704.0  -  711.0 0.198 0.1  PM 8M89W7D
BC 27 700.5  -  714.5 0.175 0.1  PM 2M68G7D
BC 27 704.0  -  711.0 0.175 0.1  PM 4M48G7D

This is C2PC for adding a specific host (model: MS-5776-A-H, brand: Conexio) and antenna.

Single Modular Approval. Power output is conducted at the antenna terminal. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install the SIM7600A-H module. This device contains LTE/WCDMA functions that are not operational in U.S. Territories. This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15MHz and 20 MHz bandwidth modes for LTE Band 2, 4 and 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Band 12.

This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

EAS Grant - Application uUdywLWnwBoPEaZMr1tN3g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

CONEXIO corporation
Shinjuku Grand Tower Shinjuku-ku Nishi-shinjyuku8-17-1
Tokyo, 160-6137
Japan 		  Date of Grant: 10/09/2019

Application Dated: 10/09/2019
 
Attention: Tomoki Higashitani , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AUBP-5776AH
Name of Grantee:  CONEXIO corporation
Equipment Class: PCS Licensed Transmitter
Notes: LTE-FDD/HSPA MODULE
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC 22H 826.4  -  846.6 0.258 0.1  PM 4M15F9W
BC 24E 1852.4  -  1907.6 0.183 0.1  PM 4M10F9W
BC 24E 1855.0  -  1905.0 0.158 0.1  PM 8M99W7D
BC 24E 1860.0  -  1900.0 0.157 0.1  PM 17M9W7D
BC 24E 1851.5  -  1908.5 0.156 0.1  PM 2M69G7D
BC 24E 1855.0  -  1905.0 0.156 0.1  PM 4M47G7D
BC 24E 1860.0  -  1900.0 0.154 0.1  PM 4M47G7D
BC 27 1715.0  -  1750.0 0.182 0.1  PM 8M94W7D
BC 27 1720.0  -  1745.0 0.177 0.1  PM 17M9W7D
BC 27 1720.0  -  1745.0 0.158 0.1  PM 4M50G7D
BC 27 701.5  -  713.5 0.198 0.1  PM 4M46W7D
BC 27 704.0  -  711.0 0.198 0.1  PM 8M89W7D
BC 27 700.5  -  714.5 0.175 0.1  PM 2M68G7D
BC 27 704.0  -  711.0 0.175 0.1  PM 4M48G7D

This is C2PC for adding a specific host (model: MS-5776-A-H, brand: Conexio) and antenna.

Single Modular Approval. Power output is conducted at the antenna terminal. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install the SIM7600A-H module. This device contains LTE/WCDMA functions that are not operational in U.S. Territories. This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15MHz and 20 MHz bandwidth modes for LTE Band 2, 4 and 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Band 12.

This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

Mail To: