FCC ID 2AUCLLM-1000

Linxdot Concentrator Module

by FX Technology Limited

Grantee Code: 2AUCL   Product Code: LM1000
Latest application date: 2022-11-03

FCC ID Device Details

FCC ID2AUCLLM-1000
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AUCL
Product CodeLM1000
Applicant BusinessFX Technology Limited 🇬🇧
Related Domains fxtec.com
Equipment ClassLinxdot Concentrator Module
Test FirmSHENZHEN TONGCE TESTING LAB

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
923.3-927.5 MHzOriginal Equipment2022-11-03
902.3-914.9 MHzOriginal Equipment2022-11-03

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2023-05-02PDF 1 MB
Internal PhotosInternal Photos2023-05-02PDF 577.7 KB
External PhotosExternal Photos2023-05-02PDF 463.6 KB
LabelID Label/Location Info2022-11-03PDF 153.5 KB
Test Setup photosTest Setup Photos2023-05-02PDF 279.2 KB
Antenna SpecificationTest Report2022-11-03PDF 617.8 KB
Test ReportTest Report2022-11-03PDF 2.6 MB
Test ReportTest Report2022-11-03PDF 3.4 MB
AgentAuthorizationRev1.0Cover Letter(s)2022-11-03PDF 276.2 KB
FCC Modular Approval Request Rev 3.0Cover Letter(s)2022-11-03PDF 662.7 KB
FCCModularApprovalRequestRev3.0Cover Letter(s)2022-11-03PDF 662.7 KB
Long_Term_ConfidentialityCover Letter(s)2022-11-03PDF 299.5 KB
RF exposureRF Exposure Info2022-11-03PDF 392.7 KB
BlockDiagram Metadata onlyBlock DiagramPDF 95.9 KB
SCH Metadata onlySchematicsPDF 265.4 KB
OP Metadata onlyOperational DescriptionPDF 44.5 KB

Application Information

Application IDBBtWLrrxUIvbK5VFeFkOHg==
Final Action Date2022-11-03
Application PurposeOriginal Equipment
Applicant FRN0028743045
ModelLM-1000
Frequency Range923.3-927.5 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionLinxdot Concentrator Module
Responsible PartyLiangchen Chen, support@fxtec.com , +44-8081001800
Technical ContactFX Technology Limited, support@fxtec.com
Test FirmBeryl Zhao, SHENZHEN TONGCE TESTING LAB, berylzhao@tct-lab.com , +8675527208735
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date05/02/2023
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Modular Approval. Power listed is the maximum conducted output power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.

Applications

Application IDDatePurpose
BBtWLrrxUIvbK5VFeFkOHg==2022-11-03Original Equipment
5AN1zt9xbLCr8Lu/lov4AQ==2022-11-03Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
902.3-914.9 MHz0.014300015CCC
923.3-927.5 MHz0.011500015CCC

Grants

TCB Grant - Application BBtWLrrxUIvbK5VFeFkOHg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 11/03/2022

Application Dated: 11/03/2022
FX Technology Limited
2 Stone Buildings
Lincoln's Inn
London, WC2A 3TH
United Kingdom
 
Attention: Liangchen Chen

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AUCLLM-1000
Name of Grantee:  FX Technology Limited
Equipment Class: Digital Transmission System
Notes: Linxdot Concentrator Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 923.3  -  927.5 0.0115  

Single Modular Approval. Power listed is the maximum conducted output power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application BBtWLrrxUIvbK5VFeFkOHg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

FX Technology Limited
2 Stone Buildings Lincoln's Inn
London, WC2A 3TH
United Kingdom
  Date of Grant: 11/03/2022

Application Dated: 11/03/2022
 
Attention: Liangchen Chen

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AUCLLM-1000
Name of Grantee:  FX Technology Limited
Equipment Class: Digital Transmission System
Notes: Linxdot Concentrator Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 923.3  -  927.5 0.0115  

Single Modular Approval. Power listed is the maximum conducted output power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 5AN1zt9xbLCr8Lu/lov4AQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 11/03/2022

Application Dated: 11/03/2022
FX Technology Limited
2 Stone Buildings
Lincoln's Inn
London, WC2A 3TH
United Kingdom
 
Attention: Liangchen Chen

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AUCLLM-1000
Name of Grantee:  FX Technology Limited
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Linxdot Concentrator Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 902.3  -  914.9 0.0143  

Single Modular Approval. Power listed is the maximum conducted output power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 5AN1zt9xbLCr8Lu/lov4AQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

FX Technology Limited
2 Stone Buildings Lincoln's Inn
London, WC2A 3TH
United Kingdom
  Date of Grant: 11/03/2022

Application Dated: 11/03/2022
 
Attention: Liangchen Chen

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AUCLLM-1000
Name of Grantee:  FX Technology Limited
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Linxdot Concentrator Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 902.3  -  914.9 0.0143  

Single Modular Approval. Power listed is the maximum conducted output power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: