FCC ID 2AUCY-V2118
Mobile Phone
by vivo Mobile Communication Co., Ltd.
Grantee Code: 2AUCY Product Code: V2118
Latest application date: 2021-10-27
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2021-10-27 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-10-27 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-10-27 |
| 779.5-784.5 MHz | Class II permissive change or modification of presently authorized equipment | 2021-10-27 |
| 2402-2480 MHz | Original Equipment | 2021-10-22 |
| 5180-5240 MHz | Original Equipment | 2021-10-22 |
| 779.5-784.5 MHz | Original Equipment | 2021-10-22 |
| 2402-2480 MHz | Original Equipment | 2021-10-22 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2022-04-25 | PDF 177.3 KB |
| user manual | Users Manual | 2022-04-25 | PDF 177.3 KB |
| User Manual | Users Manual | 2022-04-20 | PDF 201.1 KB |
| User manual | Users Manual | 2022-04-20 | PDF 201.1 KB |
| Internal Photo | Internal Photos | 2022-04-25 | PDF 2.3 MB |
| Internal Photos | Internal Photos | 2022-04-25 | PDF 2.3 MB |
| Internal photos | Internal Photos | 2022-04-25 | PDF 2.3 MB |
| Int EUT PHOTO | Internal Photos | 2022-04-20 | PDF 1.1 MB |
| Internal Photo | Internal Photos | 2022-04-20 | PDF 1.1 MB |
| Internal Photos | Internal Photos | 2022-04-20 | PDF 1.1 MB |
| Internal photos | Internal Photos | 2022-04-20 | PDF 1.1 MB |
| External Photo | External Photos | 2022-04-25 | PDF 1.5 MB |
| External Photos | External Photos | 2022-04-25 | PDF 1.5 MB |
| External photos | External Photos | 2022-04-25 | PDF 1.5 MB |
| External Photo | External Photos | 2022-04-20 | PDF 803.5 KB |
| External Photos | External Photos | 2022-04-20 | PDF 803.5 KB |
| External photo | External Photos | 2022-04-20 | PDF 803.5 KB |
| External photos | External Photos | 2022-04-20 | PDF 803.5 KB |
| Label Location | ID Label/Location Info | 2021-10-27 | PDF 42.3 KB |
| Label and location | ID Label/Location Info | 2021-10-27 | PDF 42.3 KB |
| Label instruction | ID Label/Location Info | 2021-10-27 | PDF 165.1 KB |
| label instruction | ID Label/Location Info | 2021-10-27 | PDF 165.1 KB |
| label Attestation_Letter | ID Label/Location Info | 2021-10-22 | PDF 42.3 KB |
| label instruction | ID Label/Location Info | 2021-10-22 | PDF 164.5 KB |
| Test setup photo | Test Setup Photos | 2022-04-25 | PDF 1.2 MB |
| Test setup photo | Test Setup Photos | 2022-04-25 | PDF 1.1 MB |
| Test setup photoSAR | Test Setup Photos | 2022-04-25 | PDF 859.4 KB |
| Test setup photo | Test Setup Photos | 2022-04-20 | PDF 1,005.3 KB |
| Test setup photo | Test Setup Photos | 2022-04-20 | PDF 1.2 MB |
| Test setup photoSAR | Test Setup Photos | 2022-04-20 | PDF 846.8 KB |
| Test Report | Test Report | 2021-10-27 | PDF 3.1 MB |
| Test Report | Test Report | 2021-10-27 | PDF 4.4 MB |
| Test Report | Test Report | 2021-10-27 | PDF 5.9 MB |
| Test Report | Test Report | 2021-10-27 | PDF 5.5 MB |
| Test Report | Test Report | 2021-10-27 | PDF 4.2 MB |
| Test Report SAR | RF Exposure Info | 2021-10-27 | PDF 5.5 MB |
| Test Report SAR | RF Exposure Info | 2021-10-27 | PDF 4.6 MB |
| Test Report | Test Report | 2021-10-22 | PDF 2.3 MB |
| Test Report | Test Report | 2021-10-22 | PDF 2.7 MB |
| Test Report | Test Report | 2021-10-22 | PDF 4 MB |
| Test Report | Test Report | 2021-10-22 | PDF 4 MB |
| Test Report | Test Report | 2021-10-22 | PDF 5.9 MB |
| Test Report SAR | RF Exposure Info | 2021-10-22 | PDF 4 MB |
| Agent Authorization Rev 1.0 | Cover Letter(s) | 2021-10-27 | PDF 16.7 KB |
| Authorization Letter | Cover Letter(s) | 2021-10-27 | PDF 60.4 KB |
| C2PC cover letter | Cover Letter(s) | 2021-10-27 | PDF 79.3 KB |
| FCC Short & Long Term Confidentiality Request Rev4.1 | Cover Letter(s) | 2021-10-27 | PDF 62.1 KB |
| FCC Software Configuration Control Declaration | Cover Letter(s) | 2021-10-27 | PDF 111.7 KB |
| FCC_Short Long Term Confidentiality | Cover Letter(s) | 2021-10-27 | PDF 62.1 KB |
| FCC_Short Long Term Confidentiality Request_EZDS_rev2 | Cover Letter(s) | 2021-10-27 | PDF 62.1 KB |
| Agent Authorization Letter | Cover Letter(s) | 2021-10-22 | PDF 16.7 KB |
| Agent Authorization Rev 1.0 | Cover Letter(s) | 2021-10-22 | PDF 16.7 KB |
| FCC Software Configuration Control Declaration Rev1.1 | Cover Letter(s) | 2021-10-22 | PDF 111.8 KB |
| Test RepoSAR | RF Exposure Info | 2021-10-27 | PDF 5.5 MB |
| Test RepoSAR | RF Exposure Info | 2021-10-22 | PDF 4 MB |
| BLOCK Metadata only | Block Diagram | PDF 672.3 KB | |
| Block Metadata only | Block Diagram | PDF 672.3 KB | |
| Block diagram Metadata only | Block Diagram | PDF 672.3 KB | |
| BlockDiagram Metadata only | Block Diagram | PDF 672.3 KB | |
| SCH Metadata only | Schematics | PDF 1.2 MB | |
| Schematic Metadata only | Schematics | PDF 1.2 MB | |
| OP Metadata only | Operational Description | PDF 1.1 MB | |
| OP Metadata only | Operational Description | PDF 1.1 MB | |
| Operation Description Metadata only | Operational Description | PDF 1.1 MB | |
| Operation Description Metadata only | Operational Description | PDF 1.1 MB | |
| FCC Software Security Requirements for UNII devices_EZDS Metadata only | SDR Software/Security Inf | PDF 102.8 KB | |
| SCH Metadata only | SDR Software/Security Inf | PDF 1.2 MB | |
| software security information information Metadata only | SDR Software/Security Inf | PDF 102.8 KB | |
| BOM Metadata only | Parts List/Tune Up Info | PDF 171.2 KB | |
| BOM Metadata only | Parts List/Tune Up Info | PDF 136.9 KB | |
| Tune up procedure Metadata only | Parts List/Tune Up Info | PDF 2.1 MB |
Application Information
| Application ID | jf9hYFIFId6wxAZlZHvdmQ== |
|---|---|
| Final Action Date | 2021-10-27 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0028746295 |
| Model | V2118 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Mobile Phone |
| Responsible Party | Jianfeng Xiang, Certification Engineer, regulations-1@vivo.com  , +86-0769-85540688 |
| Technical Contact | vivo Mobile Communication Co., Ltd., xiangjianfeng@vivo.com |
| Test Firm | Hanson Lin, Shenzhen BALUN Technology Co., Ltd., Hanson.Lin@baluntek.com  , 86-755-66833830 |
| TCB Email | certification@micomlabs.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 04/25/2022 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II permissive is for this filling. Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.30W/kg, 0.63W/kg, 0.90W/kg and 1.40W/kg respectively. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| jf9hYFIFId6wxAZlZHvdmQ== | 2021-10-27 | Class II permissive change or modification of presently authorized equipment |
| fSdBQPLHnnGTb62RAOpnLA== | 2021-10-27 | Class II permissive change or modification of presently authorized equipment |
| U5uwWQyynsctVun3ntS/8A== | 2021-10-27 | Class II permissive change or modification of presently authorized equipment |
| 3MmIbmsCa1yne48+4F8IGg== | 2021-10-27 | Class II permissive change or modification of presently authorized equipment |
| /0PkvXBv5XSIfcDn+pz9NA== | 2021-10-27 | Class II permissive change or modification of presently authorized equipment |
| cdZmsTo2GgDGGh/AkJjp0g== | 2021-10-22 | Original Equipment |
| aPasaUEUCG3XmvYVjPaoDQ== | 2021-10-22 | Original Equipment |
| R7xPCeaLDGmGISnFxl46AA== | 2021-10-22 | Original Equipment |
| OQVGxLmf0yPRpKYQDofp1w== | 2021-10-22 | Original Equipment |
| 0mS1VPukghICmKyB2QHGBg== | 2021-10-22 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules | Grant Notes |
|---|---|---|---|---|---|
| 15B | CC | ||||
| 779.5-784.5 MHz | 0.08 | 2.5ppm | 4M51W7D | 27 | |
| 782 MHz | 0.092 | 2.5ppm | 9M01G7D | 27 | |
| 782 MHz | 0.072 | 2.5ppm | 8M99W7D | 27 | |
| 824.7-848.3 MHz | 0.058 | 2.5ppm | 1M09G7D | 22H | |
| 826.4-846.6 MHz | 0.047 | 2.5ppm | 4M16F9W | 22H | |
| 829-844 MHz | 0.057 | 2.5ppm | 8M97G7D | 22H | |
| 829-844 MHz | 0.049 | 2.5ppm | 8M98W7D | 22H | |
| 1712.4-1752.6 MHz | 0.2 | 2.5ppm | 4M16F9W | 27 | |
| 1715-1775 MHz | 0.25 | 2.5ppm | 9M00G7D | 27 | |
| 1720-1745 MHz | 0.233 | 2.5ppm | 17M9G7D | 27 | |
| 1720-1745 MHz | 0.202 | 2.5ppm | 17M9W7D | 27 | |
| 1720-1770 MHz | 0.249 | 2.5ppm | 18M0G7D | 27 | |
| 1720-1770 MHz | 0.224 | 2.5ppm | 18M0W7D | 27 | |
| 1850.2-1909.8 MHz | 0.839 | 2.5ppm | 246KGXW | 24E | |
| 1850.2-1909.8 MHz | 0.659 | 2.5ppm | 249KG7W | 24E | |
| 1852.4-1907.6 MHz | 0.177 | 2.5ppm | 4M16F9W | 24E | |
| 1860-1900 MHz | 0.195 | 2.5ppm | 17M9G7D | 24E | |
| 1860-1900 MHz | 0.17 | 2.5ppm | 17M9W7D | 24E | |
| 2402-2480 MHz | 0.00054 | 15C | CC | ||
| 2402-2480 MHz | 0.0089000 | 15C | CC | ||
| 2412-2462 MHz | 0.23121 | 15C | CC | ||
| 2505-2565 MHz | 0.427 | 2.5ppm | 8M97G7D | 27 | |
| 2510-2560 MHz | 0.378 | 2.5ppm | 17M9G7D | 27 | |
| 2510-2560 MHz | 0.356 | 2.5ppm | 17M9W7D | 27 | |
| 2545-2645 MHz | 0.419 | 2.5ppm | 18M0G7D | 27 | |
| 2545-2645 MHz | 0.355 | 2.5ppm | 18M0W7D | 27 | |
| 2580-2610 MHz | 0.409 | 2.5ppm | 18M0G7D | 27 | |
| 2580-2610 MHz | 0.35 | 2.5ppm | 18M0W7D | 27 | |
| 5180-5240 MHz | 0.04406 | 15E | 38, CC | ||
| 5260-5320 MHz | 0.04457 | 15E | 38, CC, ND | ||
| 5500-5720 MHz | 0.05321 | 15E | 38, CC, ND | ||
| 5745-5825 MHz | 0.05321 | 15E | 38, CC |
Grants
TCB Grant - Application U5uwWQyynsctVun3ntS/8A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 10/27/2021 Application Dated: 10/27/2021 |
| vivo Mobile Communication Co., Ltd. |
| No.168 Jinghai East Rd., Chang'an |
| DongGuan, China |
| Attention: Jianfeng Xiang , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AUCY-V2118 |
| Name of Grantee: | vivo Mobile Communication Co., Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Mobile Phone |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0089 |
| Class II permissive is for this filling. Output power listed is conducted power. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.15W/kg, 0.02W/kg, 0.05W/kg and 1.40W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application U5uwWQyynsctVun3ntS/8A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
vivo Mobile Communication Co., Ltd. No.168 Jinghai East Rd., Chang'an DongGuan, China |
Date of Grant: 10/27/2021 Application Dated: 10/27/2021 |
| Attention: Jianfeng Xiang , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AUCY-V2118 |
| Name of Grantee: | vivo Mobile Communication Co., Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Mobile Phone |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0089 |
| Class II permissive is for this filling. Output power listed is conducted power. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.15W/kg, 0.02W/kg, 0.05W/kg and 1.40W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 10/22/2021 Application Dated: 10/22/2021 |
| vivo Mobile Communication Co., Ltd. |
| No.168 Jinghai East Rd., Chang'an |
| DongGuan, China |
| Attention: Jianfeng Xiang , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AUCY-V2118 |
| Name of Grantee: | vivo Mobile Communication Co., Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Mobile Phone |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.04406 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.04457 | ||
| 38 CC ND | 15E | 5500.0 - 5720.0 | 0.05321 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.05321 |
| Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.25W/kg, 0.65W/kg, 0.90W/kg and 1.40W/kg respectively. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application R7xPCeaLDGmGISnFxl46AA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
vivo Mobile Communication Co., Ltd. No.168 Jinghai East Rd., Chang'an DongGuan, China |
Date of Grant: 10/22/2021 Application Dated: 10/22/2021 |
| Attention: Jianfeng Xiang , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AUCY-V2118 |
| Name of Grantee: | vivo Mobile Communication Co., Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Mobile Phone |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.04406 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.04457 | ||
| 38 CC ND | 15E | 5500.0 - 5720.0 | 0.05321 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.05321 |
| Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.25W/kg, 0.65W/kg, 0.90W/kg and 1.40W/kg respectively. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 10/22/2021 Application Dated: 10/22/2021 |
| vivo Mobile Communication Co., Ltd. |
| No.168 Jinghai East Rd., Chang'an |
| DongGuan, China |
| Attention: Jianfeng Xiang , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AUCY-V2118 |
| Name of Grantee: | vivo Mobile Communication Co., Ltd. |
| Equipment Class: | PCS Licensed Transmitter held to ear |
| Notes: | Mobile Phone |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 0.475 | 2.5 PM | 246KGXW | |
| 22H | 824.2 - 848.8 | 0.261 | 2.5 PM | 246KG7W | |
| 24E | 1850.2 - 1909.8 | 0.839 | 2.5 PM | 246KGXW | |
| 24E | 1850.2 - 1909.8 | 0.659 | 2.5 PM | 249KG7W | |
| 24E | 1852.4 - 1907.6 | 0.177 | 2.5 PM | 4M16F9W | |
| 27 | 1712.4 - 1752.6 | 0.2 | 2.5 PM | 4M16F9W | |
| 22H | 826.4 - 846.6 | 0.047 | 2.5 PM | 4M16F9W | |
| 24E | 1860.0 - 1900.0 | 0.195 | 2.5 PM | 17M9G7D | |
| 24E | 1860.0 - 1900.0 | 0.17 | 2.5 PM | 17M9W7D | |
| 27 | 1720.0 - 1745.0 | 0.233 | 2.5 PM | 17M9G7D | |
| 27 | 1720.0 - 1745.0 | 0.202 | 2.5 PM | 17M9W7D | |
| 22H | 829.0 - 844.0 | 0.057 | 2.5 PM | 8M97G7D | |
| 22H | 829.0 - 844.0 | 0.049 | 2.5 PM | 8M98W7D | |
| 22H | 824.7 - 848.3 | 0.058 | 2.5 PM | 1M09G7D | |
| 27 | 2510.0 - 2560.0 | 0.378 | 2.5 PM | 17M9G7D | |
| 27 | 2510.0 - 2560.0 | 0.356 | 2.5 PM | 17M9W7D | |
| 27 | 2505.0 - 2565.0 | 0.427 | 2.5 PM | 8M97G7D | |
| 27 | 782.0 - 782.0 | 0.092 | 2.5 PM | 9M01G7D | |
| 27 | 782.0 - 782.0 | 0.072 | 2.5 PM | 8M99W7D | |
| 27 | 779.5 - 784.5 | 0.08 | 2.5 PM | 4M51W7D | |
| 27 | 2580.0 - 2610.0 | 0.409 | 2.5 PM | 18M0G7D | |
| 27 | 2580.0 - 2610.0 | 0.35 | 2.5 PM | 18M0W7D | |
| 27 | 2545.0 - 2645.0 | 0.419 | 2.5 PM | 18M0G7D | |
| 27 | 2545.0 - 2645.0 | 0.355 | 2.5 PM | 18M0W7D | |
| 27 | 1720.0 - 1770.0 | 0.249 | 2.5 PM | 18M0G7D | |
| 27 | 1720.0 - 1770.0 | 0.224 | 2.5 PM | 18M0W7D | |
| 27 | 1715.0 - 1775.0 | 0.25 | 2.5 PM | 9M00G7D |
| Power output listed is ERP for frequencies below 1GHz and EIRP for frequencies above 1GHz. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.90W/kg, 0.82W/kg, 0.60W/kg and 1.40W/kg respectively. This device also contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. |
EAS Grant - Application OQVGxLmf0yPRpKYQDofp1w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
vivo Mobile Communication Co., Ltd. No.168 Jinghai East Rd., Chang'an DongGuan, China |
Date of Grant: 10/22/2021 Application Dated: 10/22/2021 |
| Attention: Jianfeng Xiang , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AUCY-V2118 |
| Name of Grantee: | vivo Mobile Communication Co., Ltd. |
| Equipment Class: | PCS Licensed Transmitter held to ear |
| Notes: | Mobile Phone |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 0.475 | 2.5 PM | 246KGXW | |
| 22H | 824.2 - 848.8 | 0.261 | 2.5 PM | 246KG7W | |
| 24E | 1850.2 - 1909.8 | 0.839 | 2.5 PM | 246KGXW | |
| 24E | 1850.2 - 1909.8 | 0.659 | 2.5 PM | 249KG7W | |
| 24E | 1852.4 - 1907.6 | 0.177 | 2.5 PM | 4M16F9W | |
| 27 | 1712.4 - 1752.6 | 0.2 | 2.5 PM | 4M16F9W | |
| 22H | 826.4 - 846.6 | 0.047 | 2.5 PM | 4M16F9W | |
| 24E | 1860.0 - 1900.0 | 0.195 | 2.5 PM | 17M9G7D | |
| 24E | 1860.0 - 1900.0 | 0.17 | 2.5 PM | 17M9W7D | |
| 27 | 1720.0 - 1745.0 | 0.233 | 2.5 PM | 17M9G7D | |
| 27 | 1720.0 - 1745.0 | 0.202 | 2.5 PM | 17M9W7D | |
| 22H | 829.0 - 844.0 | 0.057 | 2.5 PM | 8M97G7D | |
| 22H | 829.0 - 844.0 | 0.049 | 2.5 PM | 8M98W7D | |
| 22H | 824.7 - 848.3 | 0.058 | 2.5 PM | 1M09G7D | |
| 27 | 2510.0 - 2560.0 | 0.378 | 2.5 PM | 17M9G7D | |
| 27 | 2510.0 - 2560.0 | 0.356 | 2.5 PM | 17M9W7D | |
| 27 | 2505.0 - 2565.0 | 0.427 | 2.5 PM | 8M97G7D | |
| 27 | 782.0 - 782.0 | 0.092 | 2.5 PM | 9M01G7D | |
| 27 | 782.0 - 782.0 | 0.072 | 2.5 PM | 8M99W7D | |
| 27 | 779.5 - 784.5 | 0.08 | 2.5 PM | 4M51W7D | |
| 27 | 2580.0 - 2610.0 | 0.409 | 2.5 PM | 18M0G7D | |
| 27 | 2580.0 - 2610.0 | 0.35 | 2.5 PM | 18M0W7D | |
| 27 | 2545.0 - 2645.0 | 0.419 | 2.5 PM | 18M0G7D | |
| 27 | 2545.0 - 2645.0 | 0.355 | 2.5 PM | 18M0W7D | |
| 27 | 1720.0 - 1770.0 | 0.249 | 2.5 PM | 18M0G7D | |
| 27 | 1720.0 - 1770.0 | 0.224 | 2.5 PM | 18M0W7D | |
| 27 | 1715.0 - 1775.0 | 0.25 | 2.5 PM | 9M00G7D |
| Power output listed is ERP for frequencies below 1GHz and EIRP for frequencies above 1GHz. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.90W/kg, 0.82W/kg, 0.60W/kg and 1.40W/kg respectively. This device also contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 10/27/2021 Application Dated: 10/27/2021 |
| vivo Mobile Communication Co., Ltd. |
| No.168 Jinghai East Rd., Chang'an |
| DongGuan, China |
| Attention: Jianfeng Xiang , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AUCY-V2118 |
| Name of Grantee: | vivo Mobile Communication Co., Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Mobile Phone |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.04406 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.04457 | ||
| 38 CC ND | 15E | 5500.0 - 5720.0 | 0.05321 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.05321 |
| Class II permissive is for this filling. Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.30W/kg, 0.63W/kg, 0.90W/kg and 1.40W/kg respectively. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application jf9hYFIFId6wxAZlZHvdmQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
vivo Mobile Communication Co., Ltd. No.168 Jinghai East Rd., Chang'an DongGuan, China |
Date of Grant: 10/27/2021 Application Dated: 10/27/2021 |
| Attention: Jianfeng Xiang , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AUCY-V2118 |
| Name of Grantee: | vivo Mobile Communication Co., Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Mobile Phone |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.04406 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.04457 | ||
| 38 CC ND | 15E | 5500.0 - 5720.0 | 0.05321 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.05321 |
| Class II permissive is for this filling. Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.30W/kg, 0.63W/kg, 0.90W/kg and 1.40W/kg respectively. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 10/27/2021 Application Dated: 10/27/2021 |
| vivo Mobile Communication Co., Ltd. |
| No.168 Jinghai East Rd., Chang'an |
| DongGuan, China |
| Attention: Jianfeng Xiang , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AUCY-V2118 |
| Name of Grantee: | vivo Mobile Communication Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Mobile Phone |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00054 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.23121 |
| Class II permissive is for this filling. Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.57W/kg, 0.12W/kg, 0.28W/kg and 1.40W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application fSdBQPLHnnGTb62RAOpnLA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
vivo Mobile Communication Co., Ltd. No.168 Jinghai East Rd., Chang'an DongGuan, China |
Date of Grant: 10/27/2021 Application Dated: 10/27/2021 |
| Attention: Jianfeng Xiang , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AUCY-V2118 |
| Name of Grantee: | vivo Mobile Communication Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Mobile Phone |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00054 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.23121 |
| Class II permissive is for this filling. Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.57W/kg, 0.12W/kg, 0.28W/kg and 1.40W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 10/22/2021 Application Dated: 10/22/2021 |
| vivo Mobile Communication Co., Ltd. |
| No.168 Jinghai East Rd., Chang'an |
| DongGuan, China |
| Attention: Jianfeng Xiang , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AUCY-V2118 |
| Name of Grantee: | vivo Mobile Communication Co., Ltd. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Mobile Phone |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application cdZmsTo2GgDGGh/AkJjp0g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
vivo Mobile Communication Co., Ltd. No.168 Jinghai East Rd., Chang'an DongGuan, China |
Date of Grant: 10/22/2021 Application Dated: 10/22/2021 |
| Attention: Jianfeng Xiang , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AUCY-V2118 |
| Name of Grantee: | vivo Mobile Communication Co., Ltd. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Mobile Phone |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 10/22/2021 Application Dated: 10/22/2021 |
| vivo Mobile Communication Co., Ltd. |
| No.168 Jinghai East Rd., Chang'an |
| DongGuan, China |
| Attention: Jianfeng Xiang , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AUCY-V2118 |
| Name of Grantee: | vivo Mobile Communication Co., Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Mobile Phone |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0089 |
| Output power listed is conducted power. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.15W/kg, 0.02W/kg, 0.05W/kg and 1.40W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application aPasaUEUCG3XmvYVjPaoDQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
vivo Mobile Communication Co., Ltd. No.168 Jinghai East Rd., Chang'an DongGuan, China |
Date of Grant: 10/22/2021 Application Dated: 10/22/2021 |
| Attention: Jianfeng Xiang , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AUCY-V2118 |
| Name of Grantee: | vivo Mobile Communication Co., Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Mobile Phone |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0089 |
| Output power listed is conducted power. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.15W/kg, 0.02W/kg, 0.05W/kg and 1.40W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 10/27/2021 Application Dated: 10/27/2021 |
| vivo Mobile Communication Co., Ltd. |
| No.168 Jinghai East Rd., Chang'an |
| DongGuan, China |
| Attention: Jianfeng Xiang , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AUCY-V2118 |
| Name of Grantee: | vivo Mobile Communication Co., Ltd. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Mobile Phone |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| Class II permissive is for this filling. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 3MmIbmsCa1yne48+4F8IGg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
vivo Mobile Communication Co., Ltd. No.168 Jinghai East Rd., Chang'an DongGuan, China |
Date of Grant: 10/27/2021 Application Dated: 10/27/2021 |
| Attention: Jianfeng Xiang , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AUCY-V2118 |
| Name of Grantee: | vivo Mobile Communication Co., Ltd. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Mobile Phone |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| Class II permissive is for this filling. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 10/22/2021 Application Dated: 10/22/2021 |
| vivo Mobile Communication Co., Ltd. |
| No.168 Jinghai East Rd., Chang'an |
| DongGuan, China |
| Attention: Jianfeng Xiang , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AUCY-V2118 |
| Name of Grantee: | vivo Mobile Communication Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Mobile Phone |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00054 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.23121 |
| Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.57W/kg, 0.12W/kg, 0.28W/kg and 1.40W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 0mS1VPukghICmKyB2QHGBg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
vivo Mobile Communication Co., Ltd. No.168 Jinghai East Rd., Chang'an DongGuan, China |
Date of Grant: 10/22/2021 Application Dated: 10/22/2021 |
| Attention: Jianfeng Xiang , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AUCY-V2118 |
| Name of Grantee: | vivo Mobile Communication Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Mobile Phone |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00054 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.23121 |
| Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.57W/kg, 0.12W/kg, 0.28W/kg and 1.40W/kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 10/27/2021 Application Dated: 10/27/2021 |
| vivo Mobile Communication Co., Ltd. |
| No.168 Jinghai East Rd., Chang'an |
| DongGuan, China |
| Attention: Jianfeng Xiang , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AUCY-V2118 |
| Name of Grantee: | vivo Mobile Communication Co., Ltd. |
| Equipment Class: | PCS Licensed Transmitter held to ear |
| Notes: | Mobile Phone |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 0.475 | 2.5 PM | 246KGXW | |
| 22H | 824.2 - 848.8 | 0.261 | 2.5 PM | 246KG7W | |
| 24E | 1850.2 - 1909.8 | 0.839 | 2.5 PM | 246KGXW | |
| 24E | 1850.2 - 1909.8 | 0.659 | 2.5 PM | 249KG7W | |
| 24E | 1852.4 - 1907.6 | 0.177 | 2.5 PM | 4M16F9W | |
| 27 | 1712.4 - 1752.6 | 0.2 | 2.5 PM | 4M16F9W | |
| 22H | 826.4 - 846.6 | 0.047 | 2.5 PM | 4M16F9W | |
| 24E | 1860.0 - 1900.0 | 0.195 | 2.5 PM | 17M9G7D | |
| 24E | 1860.0 - 1900.0 | 0.17 | 2.5 PM | 17M9W7D | |
| 27 | 1720.0 - 1745.0 | 0.233 | 2.5 PM | 17M9G7D | |
| 27 | 1720.0 - 1745.0 | 0.202 | 2.5 PM | 17M9W7D | |
| 22H | 829.0 - 844.0 | 0.057 | 2.5 PM | 8M97G7D | |
| 22H | 829.0 - 844.0 | 0.049 | 2.5 PM | 8M98W7D | |
| 22H | 824.7 - 848.3 | 0.058 | 2.5 PM | 1M09G7D | |
| 27 | 2510.0 - 2560.0 | 0.378 | 2.5 PM | 17M9G7D | |
| 27 | 2510.0 - 2560.0 | 0.356 | 2.5 PM | 17M9W7D | |
| 27 | 2505.0 - 2565.0 | 0.427 | 2.5 PM | 8M97G7D | |
| 27 | 782.0 - 782.0 | 0.092 | 2.5 PM | 9M01G7D | |
| 27 | 782.0 - 782.0 | 0.072 | 2.5 PM | 8M99W7D | |
| 27 | 779.5 - 784.5 | 0.08 | 2.5 PM | 4M51W7D | |
| 27 | 2580.0 - 2610.0 | 0.409 | 2.5 PM | 18M0G7D | |
| 27 | 2580.0 - 2610.0 | 0.35 | 2.5 PM | 18M0W7D | |
| 27 | 2545.0 - 2645.0 | 0.419 | 2.5 PM | 18M0G7D | |
| 27 | 2545.0 - 2645.0 | 0.355 | 2.5 PM | 18M0W7D | |
| 27 | 1720.0 - 1770.0 | 0.249 | 2.5 PM | 18M0G7D | |
| 27 | 1720.0 - 1770.0 | 0.224 | 2.5 PM | 18M0W7D | |
| 27 | 1715.0 - 1775.0 | 0.25 | 2.5 PM | 9M00G7D |
| Class II permissive is for this filling. Power output listed is ERP for frequencies below 1GHz and EIRP for frequencies above 1GHz. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.90W/kg, 0.82W/kg, 0.60W/kg and 1.40W/kg respectively. This device also contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. |
EAS Grant - Application /0PkvXBv5XSIfcDn+pz9NA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
vivo Mobile Communication Co., Ltd. No.168 Jinghai East Rd., Chang'an DongGuan, China |
Date of Grant: 10/27/2021 Application Dated: 10/27/2021 |
| Attention: Jianfeng Xiang , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AUCY-V2118 |
| Name of Grantee: | vivo Mobile Communication Co., Ltd. |
| Equipment Class: | PCS Licensed Transmitter held to ear |
| Notes: | Mobile Phone |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 0.475 | 2.5 PM | 246KGXW | |
| 22H | 824.2 - 848.8 | 0.261 | 2.5 PM | 246KG7W | |
| 24E | 1850.2 - 1909.8 | 0.839 | 2.5 PM | 246KGXW | |
| 24E | 1850.2 - 1909.8 | 0.659 | 2.5 PM | 249KG7W | |
| 24E | 1852.4 - 1907.6 | 0.177 | 2.5 PM | 4M16F9W | |
| 27 | 1712.4 - 1752.6 | 0.2 | 2.5 PM | 4M16F9W | |
| 22H | 826.4 - 846.6 | 0.047 | 2.5 PM | 4M16F9W | |
| 24E | 1860.0 - 1900.0 | 0.195 | 2.5 PM | 17M9G7D | |
| 24E | 1860.0 - 1900.0 | 0.17 | 2.5 PM | 17M9W7D | |
| 27 | 1720.0 - 1745.0 | 0.233 | 2.5 PM | 17M9G7D | |
| 27 | 1720.0 - 1745.0 | 0.202 | 2.5 PM | 17M9W7D | |
| 22H | 829.0 - 844.0 | 0.057 | 2.5 PM | 8M97G7D | |
| 22H | 829.0 - 844.0 | 0.049 | 2.5 PM | 8M98W7D | |
| 22H | 824.7 - 848.3 | 0.058 | 2.5 PM | 1M09G7D | |
| 27 | 2510.0 - 2560.0 | 0.378 | 2.5 PM | 17M9G7D | |
| 27 | 2510.0 - 2560.0 | 0.356 | 2.5 PM | 17M9W7D | |
| 27 | 2505.0 - 2565.0 | 0.427 | 2.5 PM | 8M97G7D | |
| 27 | 782.0 - 782.0 | 0.092 | 2.5 PM | 9M01G7D | |
| 27 | 782.0 - 782.0 | 0.072 | 2.5 PM | 8M99W7D | |
| 27 | 779.5 - 784.5 | 0.08 | 2.5 PM | 4M51W7D | |
| 27 | 2580.0 - 2610.0 | 0.409 | 2.5 PM | 18M0G7D | |
| 27 | 2580.0 - 2610.0 | 0.35 | 2.5 PM | 18M0W7D | |
| 27 | 2545.0 - 2645.0 | 0.419 | 2.5 PM | 18M0G7D | |
| 27 | 2545.0 - 2645.0 | 0.355 | 2.5 PM | 18M0W7D | |
| 27 | 1720.0 - 1770.0 | 0.249 | 2.5 PM | 18M0G7D | |
| 27 | 1720.0 - 1770.0 | 0.224 | 2.5 PM | 18M0W7D | |
| 27 | 1715.0 - 1775.0 | 0.25 | 2.5 PM | 9M00G7D |
| Class II permissive is for this filling. Power output listed is ERP for frequencies below 1GHz and EIRP for frequencies above 1GHz. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.90W/kg, 0.82W/kg, 0.60W/kg and 1.40W/kg respectively. This device also contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. |
| Mail To: |