FCC ID 2AUDF-CB1
Smart PTZ Camera
by Shenzhen ADDX Innovation Technology co. LTD
Grantee Code: 2AUDF Product Code: CB1
Latest application date: 2020-09-10
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Original Equipment | 2020-09-10 |
Application Information
| Application ID | Syr6wyokjpFy28AjplRDJg== |
|---|---|
| Final Action Date | 2020-09-10 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0028750016 |
| Model | -CB1 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Smart PTZ Camera |
| Responsible Party | Johnson Zou, gtang@addx.ai  , 0755-32914980 |
| Technical Contact | Shenzhen Addx Innovation Technology Co ,Ltd, gtang@addx.ai |
| Test Firm | Doris Li, Attestation of Global Compliance (Shenzhen) Co., L, dorisli@agc-cert.com  , +86-755-25234088 |
| TCB Email | certification@micomlabs.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| Syr6wyokjpFy28AjplRDJg== | 2020-09-10 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2412-2462 MHz | 0.0776000 | 15C |
Grants
TCB Grant - Application Syr6wyokjpFy28AjplRDJg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 09/10/2020 Application Dated: 09/10/2020 |
| Shenzhen ADDX Innovation Technology co. LTD |
| NO.2902, Building 9A-1. Shenzhen Bay |
| Technology and Ecological Park , Nanshan District |
| shenzhen, China |
| Attention: Johnson Zou |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AUDF-CB1 |
| Name of Grantee: | Shenzhen ADDX Innovation Technology co. LTD |
| Equipment Class: | Digital Transmission System |
| Notes: | Smart PTZ Camera |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0776 |
| Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
EAS Grant - Application Syr6wyokjpFy28AjplRDJg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen ADDX Innovation Technology co. LTD NO.2902, Building 9A-1. Shenzhen Bay Technology and Ecological Park , Nanshan District shenzhen, China |
Date of Grant: 09/10/2020 Application Dated: 09/10/2020 |
| Attention: Johnson Zou |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AUDF-CB1 |
| Name of Grantee: | Shenzhen ADDX Innovation Technology co. LTD |
| Equipment Class: | Digital Transmission System |
| Notes: | Smart PTZ Camera |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0776 |
| Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| Mail To: |