FCC ID 2AUDF-CQ12X
Smart PTZ Battery Camera
by Shenzhen ADDX Innovation Technology co. ,LTD.
Grantee Code: 2AUDF Product Code: CQ12X
Latest application date: 2021-12-21
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2021-12-21 |
| 2412-2462 MHz | Original Equipment | 2021-12-15 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User manual | Users Manual | 2021-12-21 | PDF 764.6 KB |
| User Manual | Users Manual | 2021-12-15 | PDF 761.1 KB |
| Internal Photos | Internal Photos | 2021-12-21 | PDF 1.1 MB |
| Internal photos | Internal Photos | 2021-12-15 | PDF 1.3 MB |
| External Photos | External Photos | 2021-12-21 | PDF 807.9 KB |
| External photos | External Photos | 2021-12-15 | PDF 819.2 KB |
| Label location | ID Label/Location Info | 2021-12-21 | PDF 523.8 KB |
| Label and Location | ID Label/Location Info | 2021-12-15 | PDF 536.9 KB |
| Test Setup Photos | Test Setup Photos | 2021-12-21 | PDF 400.2 KB |
| Test Setup Photos | Test Setup Photos | 2021-12-15 | PDF 614.9 KB |
| Test Report-DTS-2.4GWIFI | Test Report | 2021-12-21 | PDF 1.5 MB |
| Appendix A for WiFi RF Test Data | Test Report | 2021-12-15 | PDF 4.4 MB |
| Test Report 2.4G WiFi | Test Report | 2021-12-15 | PDF 2 MB |
| Class II Permissive Change Justification Letter | Cover Letter(s) | 2021-12-21 | PDF 531.2 KB |
| Declaration Letter of Model Difference | Cover Letter(s) | 2021-12-21 | PDF 74 KB |
| FCC POA | Cover Letter(s) | 2021-12-21 | PDF 174.8 KB |
| Declaration Letter of Model Difference | Cover Letter(s) | 2021-12-15 | PDF 165.2 KB |
| FCC Confidentiality request letter | Cover Letter(s) | 2021-12-15 | PDF 122.4 KB |
| FCC Declaration of Disable WLAN Channel 12 and 13 | Cover Letter(s) | 2021-12-15 | PDF 132.5 KB |
| FCC POA | Cover Letter(s) | 2021-12-15 | PDF 297.9 KB |
| TB-MPE184041-RF Exposure-MPE | RF Exposure Info | 2021-12-15 | PDF 356.3 KB |
| Block Diagram Metadata only | Block Diagram | PDF 99.9 KB | |
| Schematic Metadata only | Schematics | PDF 636.5 KB | |
| Declaration concerning Antenna Specification Metadata only | Operational Description | PDF 319.4 KB | |
| Operation Description Metadata only | Operational Description | PDF 74.2 KB |
Application Information
| Application ID | g+B951skLAUz/ck133b1vQ== |
|---|---|
| Final Action Date | 2021-12-21 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0028750016 |
| Model | CQ12X |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Smart PTZ Battery Camera |
| Responsible Party | Garry yang, jyang1@addx.ai  , 18594279025 |
| Test Firm | Ray Lai, Shenzhen Toby Technology Co., Ltd., toby857@tongbiao.com  , --- |
| TCB Email | joergkusig@eurofins.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output Power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. C2PC as Replaced the charging IC. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| g+B951skLAUz/ck133b1vQ== | 2021-12-21 | Class II permissive change or modification of presently authorized equipment |
| nEEwUlERq+v7OIwqg21Akg== | 2021-12-15 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2412-2462 MHz | 0.0723000 | 15C |
Grants
TCB Grant - Application nEEwUlERq+v7OIwqg21Akg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Eurofins Product Service GmbH Storkower Strasse 38c D-15526 Reichenwalde, Germany |
Date of Grant: 12/15/2021 Application Dated: 12/13/2021 |
| Shenzhen ADDX Innovation Technology co. ,LTD. |
| NO.2902, Building 9A-1. Shenzhen Bay |
| Technology and Ecological Park , Nanshan District |
| shenzhen, China |
| Attention: Garry yang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AUDF-CQ12X |
| Name of Grantee: | Shenzhen ADDX Innovation Technology co. ,LTD. |
| Equipment Class: | Digital Transmission System |
| Notes: | Smart PTZ Battery Camera |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0723 |
| Output Power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
EAS Grant - Application nEEwUlERq+v7OIwqg21Akg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen ADDX Innovation Technology co. ,LTD. NO.2902, Building 9A-1. Shenzhen Bay Technology and Ecological Park , Nanshan District shenzhen, China |
Date of Grant: 12/15/2021 Application Dated: 12/13/2021 |
| Attention: Garry yang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AUDF-CQ12X |
| Name of Grantee: | Shenzhen ADDX Innovation Technology co. ,LTD. |
| Equipment Class: | Digital Transmission System |
| Notes: | Smart PTZ Battery Camera |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0723 |
| Output Power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Eurofins Product Service GmbH Storkower Strasse 38c D-15526 Reichenwalde, Germany |
Date of Grant: 12/21/2021 Application Dated: 12/21/2021 |
| Shenzhen ADDX Innovation Technology co. ,LTD. |
| NO.2902, Building 9A-1. Shenzhen Bay |
| Technology and Ecological Park , Nanshan District |
| shenzhen, China |
| Attention: Garry yang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AUDF-CQ12X |
| Name of Grantee: | Shenzhen ADDX Innovation Technology co. ,LTD. |
| Equipment Class: | Digital Transmission System |
| Notes: | Smart PTZ Battery Camera |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0723 |
| Output Power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. C2PC as Replaced the charging IC. |
EAS Grant - Application g+B951skLAUz/ck133b1vQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen ADDX Innovation Technology co. ,LTD. NO.2902, Building 9A-1. Shenzhen Bay Technology and Ecological Park , Nanshan District shenzhen, China |
Date of Grant: 12/21/2021 Application Dated: 12/21/2021 |
| Attention: Garry yang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AUDF-CQ12X |
| Name of Grantee: | Shenzhen ADDX Innovation Technology co. ,LTD. |
| Equipment Class: | Digital Transmission System |
| Notes: | Smart PTZ Battery Camera |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0723 |
| Output Power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. C2PC as Replaced the charging IC. |
| Mail To: |