1. FCC ID
  2. 2AUDF
  3. 2AUDF-CQ12Y

FCC ID 2AUDF-CQ12Y

Security Camera

by Shenzhen ADDX Innovation Technology co. ,LTD.

Grantee Code: 2AUDF   Product Code: CQ12Y
Latest application date: 2023-07-10

FCC ID Device Details

FCC ID2AUDF-CQ12Y
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AUDF
Product CodeCQ12Y
Applicant BusinessShenzhen ADDX Innovation Technology co. ,LTD. 🇨🇳
Related Domains addx.ai
Equipment ClassSecurity Camera
Test FirmShenzhen Toby Technology Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2023-07-10
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2023-07-06
2402-2480 MHzOriginal Equipment2022-06-30

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2023-07-10PDF 2.6 MB
15_CQ1 UserMan-USUsers Manual2023-07-06PDF 817.3 KB
User ManualUsers Manual2022-06-30PDF 953.9 KB
Internal PhotographsInternal Photos2023-07-10PDF 673.2 KB
09_CQ1 IntPhoInternal Photos2023-07-06PDF 823.7 KB
Interanl photosInternal Photos2022-06-30PDF 548.1 KB
External PhotographsExternal Photos2023-07-10PDF 844.8 KB
08_CQ1 ExtPhoExternal Photos2023-07-06PDF 644.8 KB
External photosExternal Photos2022-06-30PDF 403.3 KB
Label and Label LocationID Label/Location Info2023-07-10PDF 1 MB
06_CQ1 LabelSmpl-USID Label/Location Info2023-07-06PDF 397.1 KB
Label and loctaionID Label/Location Info2022-06-30PDF 413 KB
Test Setup PhotosTest Setup Photos2023-07-10PDF 581.6 KB
10_CQ1 TSupTest Setup Photos2023-07-06PDF 608.1 KB
Test Setup PhotosTest Setup Photos2022-06-30PDF 412.8 KB
Test Report 2.4G WiFiTest Report2023-07-10PDF 1.9 MB
Test Report BLETest Report2023-07-10PDF 2.3 MB
14_CQ1 TestRpt DTS BLE r2Test Report2023-07-06PDF 2.1 MB
14_CQ1 TestRpt DTS WiFi r2Test Report2023-07-06PDF 2.3 MB
17_CQ1 AntSpec p1 r1Test Report2023-07-06PDF 10.9 KB
17_CQ1 AntSpec p2 BLETest Report2023-07-06PDF 407.8 KB
17_CQ1 AntSpec p2 WIFI r1Test Report2023-07-06PDF 1.3 MB
Appendix A for WiFi RF Test DataTest Report2022-06-30PDF 4.8 MB
Appendix B for BLE RF Test DataTest Report2022-06-30PDF 2.2 MB
Test Report 2.4G WiFiTest Report2022-06-30PDF 1.8 MB
Test Report BLETest Report2022-06-30PDF 1.6 MB
Covered Equipment Attestation_2.911(d)(5)(i) and (ii)Attestation Statements2023-07-10PDF 143.3 KB
US_Agent_2.911(d)(7)-U_V04Attestation Statements2023-07-10PDF 39.8 KB
48_CQ1 US_Agent_2.911(d)(7)Attestation Statements2023-07-06PDF 39.8 KB
62_CQ1 CoveredEqu_2.911(d)(5)(i) and (ii)Attestation Statements2023-07-06PDF 95.4 KB
Class II Permissive Change Justification LetterCover Letter(s)2023-07-10PDF 233 KB
Declaration Letter of Model DifferenceCover Letter(s)2023-07-10PDF 73.9 KB
FCC POACover Letter(s)2023-07-10PDF 174.2 KB
30_CQ1 CIIPCHLetter r1Cover Letter(s)2023-07-06PDF 604.5 KB
FCC Confidentiality request letterCover Letter(s)2022-06-30PDF 220.3 KB
FCC Declaration of Disable WLAN Channel 12 and 13Cover Letter(s)2022-06-30PDF 173 KB
FCC POACover Letter(s)2022-06-30PDF 182.2 KB
MPE EVALUATIONRF Exposure Info2023-07-10PDF 1.1 MB
18_CQ1 RFExp r2RF Exposure Info2023-07-06PDF 771.4 KB
RF Exposure-MPERF Exposure Info2022-06-30PDF 757.6 KB
12_CQ1 BlkDia Metadata onlyBlock DiagramPDF 183.4 KB
Block Diagram Metadata onlyBlock DiagramPDF 218.5 KB
13_CQ1 Schem Metadata onlySchematicsPDF 638.1 KB
Schematic Metadata onlySchematicsPDF 537.4 KB
11_CQ1 OpDes r1 Metadata onlyOperational DescriptionPDF 52.6 KB
Declaration concerning Antenna Specification Metadata onlyOperational DescriptionPDF 204.2 KB
Operation Description Metadata onlyOperational DescriptionPDF 269.7 KB

Application Information

Application IDTSeI5xtqdR3MKz1MLc9xxQ==
Final Action Date2023-07-10
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0028750016
ModelCQ12Y
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionSecurity Camera
Responsible PartyGarry yang, jyang1@addx.ai , 18594279025
Test FirmRay Lai, Shenzhen Toby Technology Co., Ltd., toby857@tongbiao.com , ---
TCB Emailjoergkusig@eurofins.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput Power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. C2PC as camera size change.

Applications

Application IDDatePurpose
TSeI5xtqdR3MKz1MLc9xxQ==2023-07-10Class II permissive change or modification of presently authorized equipment
tzKyzwesq8nhnNCdXAzb1g==2023-07-06Class II permissive change or modification of presently authorized equipment
FLLGcATlf7HR2WlbvLDetA==2022-06-30Original Equipment

Equipment Authorization

FrequencyOutputRules
2402-2480 MHz0.000515C
2412-2462 MHz0.038215C

Grants

TCB Grant - Application tzKyzwesq8nhnNCdXAzb1g==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany 		Date of Grant: 07/06/2023

Application Dated: 07/06/2023
Shenzhen ADDX Innovation Technology co. ,LTD.
NO.2902, Building 9A-1. Shenzhen Bay
Technology and Ecological Park , Nanshan District
shenzhen,
China
 
Attention: Garry yang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AUDF-CQ12Y
Name of Grantee:  Shenzhen ADDX Innovation Technology co. ,LTD.
Equipment Class: Digital Transmission System
Notes: Smart PTZ Battery Camera
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2402.0  -  2480.0 0.0005  
15C 2412.0  -  2462.0 0.0382  

Output Power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

EAS Grant - Application tzKyzwesq8nhnNCdXAzb1g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Shenzhen ADDX Innovation Technology co. ,LTD.
NO.2902, Building 9A-1. Shenzhen Bay Technology and Ecological Park , Nanshan District
shenzhen,
China 		  Date of Grant: 07/06/2023

Application Dated: 07/06/2023
 
Attention: Garry yang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AUDF-CQ12Y
Name of Grantee:  Shenzhen ADDX Innovation Technology co. ,LTD.
Equipment Class: Digital Transmission System
Notes: Smart PTZ Battery Camera
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2402.0  -  2480.0 0.0005  
15C 2412.0  -  2462.0 0.0382  

Output Power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.



TCB Grant - Application TSeI5xtqdR3MKz1MLc9xxQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany 		Date of Grant: 07/10/2023

Application Dated: 07/10/2023
Shenzhen ADDX Innovation Technology co. ,LTD.
NO.2902, Building 9A-1. Shenzhen Bay
Technology and Ecological Park , Nanshan District
shenzhen,
China
 
Attention: Garry yang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AUDF-CQ12Y
Name of Grantee:  Shenzhen ADDX Innovation Technology co. ,LTD.
Equipment Class: Digital Transmission System
Notes: Security Camera
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2402.0  -  2480.0 0.0005  
15C 2412.0  -  2462.0 0.0382  

Output Power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. C2PC as camera size change.

EAS Grant - Application TSeI5xtqdR3MKz1MLc9xxQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Shenzhen ADDX Innovation Technology co. ,LTD.
NO.2902, Building 9A-1. Shenzhen Bay Technology and Ecological Park , Nanshan District
shenzhen,
China 		  Date of Grant: 07/10/2023

Application Dated: 07/10/2023
 
Attention: Garry yang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AUDF-CQ12Y
Name of Grantee:  Shenzhen ADDX Innovation Technology co. ,LTD.
Equipment Class: Digital Transmission System
Notes: Security Camera
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2402.0  -  2480.0 0.0005  
15C 2412.0  -  2462.0 0.0382  

Output Power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. C2PC as camera size change.



TCB Grant - Application FLLGcATlf7HR2WlbvLDetA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany 		Date of Grant: 06/30/2022

Application Dated: 06/30/2022
Shenzhen ADDX Innovation Technology co. ,LTD.
NO.2902, Building 9A-1. Shenzhen Bay
Technology and Ecological Park , Nanshan District
shenzhen,
China
 
Attention: Garry yang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AUDF-CQ12Y
Name of Grantee:  Shenzhen ADDX Innovation Technology co. ,LTD.
Equipment Class: Digital Transmission System
Notes: Smart PTZ Battery Camera
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2402.0  -  2480.0 0.0005  
15C 2412.0  -  2462.0 0.0382  

Output Power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

EAS Grant - Application FLLGcATlf7HR2WlbvLDetA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Shenzhen ADDX Innovation Technology co. ,LTD.
NO.2902, Building 9A-1. Shenzhen Bay Technology and Ecological Park , Nanshan District
shenzhen,
China 		  Date of Grant: 06/30/2022

Application Dated: 06/30/2022
 
Attention: Garry yang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AUDF-CQ12Y
Name of Grantee:  Shenzhen ADDX Innovation Technology co. ,LTD.
Equipment Class: Digital Transmission System
Notes: Smart PTZ Battery Camera
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2402.0  -  2480.0 0.0005  
15C 2412.0  -  2462.0 0.0382  

Output Power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.



Mail To: