FCC ID 2AUDF-CRB110
Smart PTZ Camera
by Shenzhen ADDX Innovation Technology co. ,LTD.
Grantee Code: 2AUDF Product Code: CRB110
Latest application date: 2024-05-12
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2024-05-12 |
| 5180-5240 MHz | Original Equipment | 2024-05-12 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User manual | Users Manual | 2024-05-12 | PDF 402.1 KB |
| Internal Photos | Internal Photos | 2024-05-12 | PDF 1.5 MB |
| External Photos | External Photos | 2024-05-12 | PDF 1,012.4 KB |
| Label and Location | ID Label/Location Info | 2024-05-12 | PDF 353.9 KB |
| Test Setup Photos | Test Setup Photos | 2024-05-12 | PDF 714.9 KB |
| 2.4G WLAN Test Report | Test Report | 2024-05-12 | PDF 1.8 MB |
| 5.2G WLAN Test Report | Test Report | 2024-05-12 | PDF 1.9 MB |
| 5.8G WLAN Test Report | Test Report | 2024-05-12 | PDF 1.7 MB |
| Antenna specification | Test Report | 2024-05-12 | PDF 1 MB |
| Appendix A Test Data for BT LE FCC ID | Test Report | 2024-05-12 | PDF 3.7 MB |
| Appendix B Test Data for 2.4GWIFI FCC ID | Test Report | 2024-05-12 | PDF 3.1 MB |
| Appendix C Test Data for 5.2GWIFI FCC ID | Test Report | 2024-05-12 | PDF 5.9 MB |
| Appendix D Test Data for 5.8GWIFI FCC ID | Test Report | 2024-05-12 | PDF 2 MB |
| BT LE Test Report | Test Report | 2024-05-12 | PDF 1.9 MB |
| Covered Equipment Attestation_2.911(d)(5)(i) and (ii) | Attestation Statements | 2024-05-12 | PDF 93.6 KB |
| US Agent | Attestation Statements | 2024-05-12 | PDF 165.5 KB |
| FCC Confidentiality request letter | Cover Letter(s) | 2024-05-12 | PDF 134.5 KB |
| FCC Declaration of Disable WLAN Channel 12 and 13 | Cover Letter(s) | 2024-05-12 | PDF 103 KB |
| FCC POA | Cover Letter(s) | 2024-05-12 | PDF 108.3 KB |
| FCC UNII Device Declaration Letter-Slaver | Cover Letter(s) | 2024-05-12 | PDF 171.6 KB |
| RF Exposure Evaluation-FCC | RF Exposure Info | 2024-05-12 | PDF 356.3 KB |
| Block Diagram | Block Diagram | PDF 95.2 KB | |
| Schematic | Schematics | PDF 1.1 MB | |
| Schematic_AB6132U-6PE | Schematics | PDF 38.9 KB | |
| Operation Description | Operational Description | PDF 78.9 KB | |
| Declaration Letter of Software Security Requirements Metadata only | SDR Software/Security Info. | PDF 597 KB | |
| BOM_AB6132U-6PE | Parts List/Tune Up Info | PDF 95.2 KB |
Application Information
| Application ID | bbdP4ZI+0VtdtQ8B/T0j6w== |
|---|---|
| Final Action Date | 2024-05-12 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0028750016 |
| Model | CRB110 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Smart PTZ Camera |
| Responsible Party | Garry yang, jyang1@addx.ai  , 18594279025 |
| Test Firm | Gavin Liang, Shenzhen LCS Compliance Testing Laboratory Ltd., gavin.liang@lcs-cert.com  , 0755-82591330 |
| TCB Email | joerdismitzloff@eurofins.de  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output Power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| bbdP4ZI+0VtdtQ8B/T0j6w== | 2024-05-12 | Original Equipment |
| +xFdy30J6uxgg+Z/1Hnyjg== | 2024-05-12 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application bbdP4ZI+0VtdtQ8B/T0j6w==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Eurofins Product Service GmbH Storkower Strasse 38c D-15526 Reichenwalde, Germany |
Date of Grant: 05/12/2024 Application Dated: 05/12/2024 |
| Shenzhen ADDX Innovation Technology co. ,LTD. |
| NO.2902, Building 9A-1. Shenzhen Bay |
| Technology and Ecological Park , Nanshan District |
| shenzhen, China |
| Attention: Garry yang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AUDF-CRB110 |
| Name of Grantee: | Shenzhen ADDX Innovation Technology co. ,LTD. |
| Equipment Class: | Digital Transmission System |
| Notes: | Smart PTZ Camera |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.001 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.034 |
| Output Power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application bbdP4ZI+0VtdtQ8B/T0j6w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen ADDX Innovation Technology co. ,LTD. NO.2902, Building 9A-1. Shenzhen Bay Technology and Ecological Park , Nanshan District shenzhen, China |
Date of Grant: 05/12/2024 Application Dated: 05/12/2024 |
| Attention: Garry yang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AUDF-CRB110 |
| Name of Grantee: | Shenzhen ADDX Innovation Technology co. ,LTD. |
| Equipment Class: | Digital Transmission System |
| Notes: | Smart PTZ Camera |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.001 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.034 |
| Output Power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Eurofins Product Service GmbH Storkower Strasse 38c D-15526 Reichenwalde, Germany |
Date of Grant: 05/12/2024 Application Dated: 05/12/2024 |
| Shenzhen ADDX Innovation Technology co. ,LTD. |
| NO.2902, Building 9A-1. Shenzhen Bay |
| Technology and Ecological Park , Nanshan District |
| shenzhen, China |
| Attention: Garry yang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AUDF-CRB110 |
| Name of Grantee: | Shenzhen ADDX Innovation Technology co. ,LTD. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Smart PTZ Camera |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0201 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0202 |
| Output power listed is average conducted. This device supports 802.11a and 802.11n with a 20 MHz and 40 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application +xFdy30J6uxgg+Z/1Hnyjg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen ADDX Innovation Technology co. ,LTD. NO.2902, Building 9A-1. Shenzhen Bay Technology and Ecological Park , Nanshan District shenzhen, China |
Date of Grant: 05/12/2024 Application Dated: 05/12/2024 |
| Attention: Garry yang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AUDF-CRB110 |
| Name of Grantee: | Shenzhen ADDX Innovation Technology co. ,LTD. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Smart PTZ Camera |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0201 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0202 |
| Output power listed is average conducted. This device supports 802.11a and 802.11n with a 20 MHz and 40 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |