FCC ID 2AUNTSUP-58A
Thermal printer
by SHENZHEN SUNPHOR ELECTRON CO., LIMITED
Grantee Code: 2AUNT Product Code: SUP58A
Latest application date: 2019-10-25
FCC ID Device Details
| FCC ID | 2AUNTSUP-58A |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AUNT |
| Product Code | SUP58A |
| Applicant Business | SHENZHEN SUNPHOR ELECTRON CO., LIMITED 🇨🇳 |
| Equipment Class | Thermal printer |
| Test Firm | Shenzhen NTEK Testing Technology Co., Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2019-10-25 |
| 2402-2480 MHz | Original Equipment | 2019-10-25 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User_Manual | Users Manual | 2020-04-22 | PDF 3.6 MB |
| Internal_Photos | Internal Photos | 2020-04-22 | PDF 1 MB |
| External_Photos | External Photos | 2019-10-25 | PDF 933.3 KB |
| Label | ID Label/Location Info | 2019-10-25 | PDF 189.2 KB |
| Test_Setup_photo | Test Setup Photos | 2020-04-22 | PDF 405.9 KB |
| S19082903501001-EDR R1 | Test Report | 2019-10-25 | PDF 1.2 MB |
| S19082903501002-BLE R1 | Test Report | 2019-10-25 | PDF 890.7 KB |
| Agent_Authorization_Rev_1.0 | Cover Letter(s) | 2019-10-25 | PDF 32.7 KB |
| FCC_Short_&_Long_Term_Confidentiality_Request | Cover Letter(s) | 2019-10-25 | PDF 69.2 KB |
| Family_models_declaration_letter- | Cover Letter(s) | 2019-10-25 | PDF 109.7 KB |
| MPE_report | RF Exposure Info | 2019-10-25 | PDF 228.5 KB |
| Block-diagram Metadata only | Block Diagram | PDF 153.1 KB | |
| block_diagram Metadata only | Block Diagram | PDF 153.1 KB | |
| Schematic Metadata only | Schematics | PDF 855.6 KB | |
| Operation Description Metadata only | Operational Description | PDF 409.6 KB |
Application Information
| Application ID | qWoVprfYXgkswUrWn4OcLA== |
|---|---|
| Final Action Date | 2019-10-25 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0028828267 |
| Model | SUP-58A |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Thermal printer |
| Responsible Party | Tony Liu, 2850690531@qq.com  , 0755-83222035 |
| Technical Contact | SHENZHEN SUNPHOR ELECTRON CO., LIMITED, 2850690531@qq.com |
| Test Firm | Alex Li, Shenzhen NTEK Testing Technology Co., Ltd., certification@ntek.org.cn  , +86-755-6115-9384 |
| TCB Email | certification@micomlabs.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 04/22/2020 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted power.The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| qWoVprfYXgkswUrWn4OcLA== | 2019-10-25 | Original Equipment |
| oN5eVHemZrjzvwj6jvW5qw== | 2019-10-25 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application qWoVprfYXgkswUrWn4OcLA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 10/25/2019 Application Dated: 10/25/2019 |
| SHENZHEN SUNPHOR ELECTRON CO., LIMITED |
| 2nd floor, Building D, YuanChuangYuan, |
| XiaoLong Road, DaLang Street, LongHua District, |
| Shenzhen, China |
| Attention: Tony Liu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AUNTSUP-58A |
| Name of Grantee: | SHENZHEN SUNPHOR ELECTRON CO., LIMITED |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Thermal printer |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00857 |
| Output power listed is conducted power.The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application qWoVprfYXgkswUrWn4OcLA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SHENZHEN SUNPHOR ELECTRON CO., LIMITED 2nd floor, Building D, YuanChuangYuan, XiaoLong Road, DaLang Street, LongHua District, Shenzhen, China |
Date of Grant: 10/25/2019 Application Dated: 10/25/2019 |
| Attention: Tony Liu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AUNTSUP-58A |
| Name of Grantee: | SHENZHEN SUNPHOR ELECTRON CO., LIMITED |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Thermal printer |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00857 |
| Output power listed is conducted power.The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 10/25/2019 Application Dated: 10/25/2019 |
| SHENZHEN SUNPHOR ELECTRON CO., LIMITED |
| 2nd floor, Building D, YuanChuangYuan, |
| XiaoLong Road, DaLang Street, LongHua District, |
| Shenzhen, China |
| Attention: Tony Liu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AUNTSUP-58A |
| Name of Grantee: | SHENZHEN SUNPHOR ELECTRON CO., LIMITED |
| Equipment Class: | Digital Transmission System |
| Notes: | Thermal printer |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008128 |
| Output power listed is conducted power.The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application oN5eVHemZrjzvwj6jvW5qw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SHENZHEN SUNPHOR ELECTRON CO., LIMITED 2nd floor, Building D, YuanChuangYuan, XiaoLong Road, DaLang Street, LongHua District, Shenzhen, China |
Date of Grant: 10/25/2019 Application Dated: 10/25/2019 |
| Attention: Tony Liu |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AUNTSUP-58A |
| Name of Grantee: | SHENZHEN SUNPHOR ELECTRON CO., LIMITED |
| Equipment Class: | Digital Transmission System |
| Notes: | Thermal printer |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.008128 |
| Output power listed is conducted power.The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |