FCC ID 2AUOX-EL-A
Etcher Laser
by smartDIYs Co.,Ltd
Grantee Code: 2AUOX Product Code: ELA
Latest application date: 2020-05-09
FCC ID Device Details
| FCC ID | 2AUOX-EL-A |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AUOX |
| Product Code | ELA |
| Applicant Business | smartDIYs Co.,Ltd 🇯🇵 |
| Related Domains |  smartdiys.com |
| Equipment Class | Etcher Laser |
| Test Firm | Shenzhen Toby Technology Co., Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2020-05-09 |
| 2402-2480 MHz | Original Equipment | 2020-05-09 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual Part1 | Users Manual | 2020-05-09 | PDF 3.7 MB |
| User Manual Part2 | Users Manual | 2020-05-09 | PDF 4.5 MB |
| Internal Photos | Internal Photos | 2020-05-09 | PDF 1.9 MB |
| External photos | External Photos | 2020-05-09 | PDF 907 KB |
| Label and Label Location | ID Label/Location Info | 2020-05-09 | PDF 242.8 KB |
| Test Setup Photos | Test Setup Photos | 2020-05-09 | PDF 169.7 KB |
| Test setup photos | Test Setup Photos | 2020-05-09 | PDF 169.7 KB |
| Test Report-DSS | Test Report | 2020-05-09 | PDF 3.3 MB |
| Test Report-DTS-2G4WLAN | Test Report | 2020-05-09 | PDF 2.5 MB |
| Test Report-DTS-BLE | Test Report | 2020-05-09 | PDF 1.5 MB |
| Declaration Letter of Model Difference | Cover Letter(s) | 2020-05-09 | PDF 17.9 KB |
| FCC Confidentiality request letter | Cover Letter(s) | 2020-05-09 | PDF 90.8 KB |
| FCC Declaration of Disable WLAN Channel 12 and 13 | Cover Letter(s) | 2020-05-09 | PDF 98.6 KB |
| FCC POA | Cover Letter(s) | 2020-05-09 | PDF 19.7 KB |
| RF exposure info-MPE | RF Exposure Info | 2020-05-09 | PDF 342 KB |
| RF exposure info-MPE Report | RF Exposure Info | 2020-05-09 | PDF 342 KB |
| Block diagram Metadata only | Block Diagram | PDF 172.2 KB | |
| Schematic Metadata only | Schematics | PDF 501 KB | |
| Declaration concerning Antenna Specification Metadata only | Operational Description | PDF 83.7 KB | |
| Operation Description Metadata only | Operational Description | PDF 131.3 KB |
Application Information
| Application ID | O/0gsb4PFrp3eSxe5DzgeQ== |
|---|---|
| Final Action Date | 2020-05-09 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0028840627 |
| Model | EL-A |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Etcher Laser |
| Responsible Party | Hirotaka Shiojima, Director, shiojima@smartdiys.com , +81 50-3786-6460 |
| Agent | Ivan Ivan Ivan, Shenzhen Toby Technology Co., Ltd., toby858@tongbiao.com  , (86)755-26509301 |
| Test Firm | Ray Lai, Shenzhen Toby Technology Co., Ltd., toby857@tongbiao.com , --- |
| TCB Email | joergkusig@eurofins.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output Power listed is peak conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| O/0gsb4PFrp3eSxe5DzgeQ== | 2020-05-09 | Original Equipment |
| EpsNPIE6gX6Q0X+f4s41+A== | 2020-05-09 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application O/0gsb4PFrp3eSxe5DzgeQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Eurofins Product Service GmbH Storkower Strasse 38c D-15526 Reichenwalde, Germany |
Date of Grant: 05/09/2020 Application Dated: 05/09/2020 |
| smartDIYs Co.,Ltd |
| 3611-20,IINO,Minami-Alps City,Yamanashi |
| 400-0222 JAPAN |
| Tokyo, Japan |
| Attention: Hirotaka Shiojima , Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AUOX-EL-A |
| Name of Grantee: | smartDIYs Co.,Ltd |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Etcher Laser |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0026 |
| Output Power listed is peak conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
EAS Grant - Application O/0gsb4PFrp3eSxe5DzgeQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
smartDIYs Co.,Ltd 3611-20,IINO,Minami-Alps City,Yamanashi 400-0222 JAPAN Tokyo, Japan |
Date of Grant: 05/09/2020 Application Dated: 05/09/2020 |
| Attention: Hirotaka Shiojima , Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AUOX-EL-A |
| Name of Grantee: | smartDIYs Co.,Ltd |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Etcher Laser |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0026 |
| Output Power listed is peak conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Eurofins Product Service GmbH Storkower Strasse 38c D-15526 Reichenwalde, Germany |
Date of Grant: 05/09/2020 Application Dated: 05/09/2020 |
| smartDIYs Co.,Ltd |
| 3611-20,IINO,Minami-Alps City,Yamanashi |
| 400-0222 JAPAN |
| Tokyo, Japan |
| Attention: Hirotaka Shiojima , Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AUOX-EL-A |
| Name of Grantee: | smartDIYs Co.,Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | Etcher Laser |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0008 | |||
| 15C | 2412.0 - 2462.0 | 0.0578 | |||
| 15C | 2422.0 - 2452.0 | 0.0145 |
| Output Power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
EAS Grant - Application EpsNPIE6gX6Q0X+f4s41+A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
smartDIYs Co.,Ltd 3611-20,IINO,Minami-Alps City,Yamanashi 400-0222 JAPAN Tokyo, Japan |
Date of Grant: 05/09/2020 Application Dated: 05/09/2020 |
| Attention: Hirotaka Shiojima , Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AUOX-EL-A |
| Name of Grantee: | smartDIYs Co.,Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | Etcher Laser |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0008 | |||
| 15C | 2412.0 - 2462.0 | 0.0578 | |||
| 15C | 2422.0 - 2452.0 | 0.0145 |
| Output Power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| Mail To: |