FCC ID 2AUPB-MAKERBOT-S
3D Printer
by MakerBot Industries LLC
Grantee Code: 2AUPB Product Code: MAKERBOTS
Latest application date: 2022-09-29
FCC ID Device Details
| FCC ID | 2AUPB-MAKERBOT-S |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AUPB |
| Product Code | MAKERBOTS |
| Applicant Business | MakerBot Industries LLC 🇺🇸 |
| Related Domains |  makerbot.com  cta-test.cn |
| Equipment Class | 3D Printer |
| Test Firm | SHENZHEN CTA TESTING TECHNOLOGY CO., LTD. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2022-09-29 |
| 2412-2462 MHz | Original Equipment | 2020-02-14 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2020-02-14 | PDF 1.6 MB |
| Internal photos | Internal Photos | 2022-09-29 | PDF 1.3 MB |
| Internal Photos | Internal Photos | 2020-02-14 | PDF 4 MB |
| External photos | External Photos | 2022-09-29 | PDF 702.5 KB |
| External Photos | External Photos | 2020-02-14 | PDF 2.3 MB |
| Label & Location | ID Label/Location Info | 2020-02-14 | PDF 1,003.7 KB |
| Test setup photos | Test Setup Photos | 2022-09-29 | PDF 400.9 KB |
| Test Setup Photos | Test Setup Photos | 2020-02-14 | PDF 1.2 MB |
| Antenna specifications | Test Report | 2022-09-29 | PDF 1 MB |
| Test reports | Test Report | 2022-09-29 | PDF 3.6 MB |
| Test Report | Test Report | 2020-02-14 | PDF 1.5 MB |
| CIIPC letter | Cover Letter(s) | 2022-09-29 | PDF 133.5 KB |
| Letter Authorization | Cover Letter(s) | 2022-09-29 | PDF 43.5 KB |
| Authorization Letter | Cover Letter(s) | 2020-02-14 | PDF 92.2 KB |
| Long Term Confidential Authorization | Cover Letter(s) | 2020-02-14 | PDF 124.2 KB |
| RF Exposure | RF Exposure Info | 2020-02-14 | PDF 106.3 KB |
| Block Diagram Metadata only | Block Diagram | PDF 822.5 KB | |
| Schematics Metadata only | Schematics | PDF 3.6 MB | |
| Circuit Description Metadata only | Operational Description | PDF 176.6 KB |
Application Information
| Application ID | v2Zy1i50F9QAQNjqKGZxOg== |
|---|---|
| Final Action Date | 2022-09-29 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0028841971 |
| Model | MAKERBOT-S |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 3D Printer |
| Responsible Party | Barbara Spampinato, Senior Regulatory Compliance Engineer, barbara.spampinato@makerbot.com , 3476763994 |
| Technical Contact | Eric Wang, Shenzhen CTA Testing Technology Co., Ltd., wangxulai@cta-test.cn , 86 755 2322 5875 |
| Non-Technical Contact | Eric Wang, Shenzhen CTA Testing Technology Co., Ltd., wangxulai@cta-test.cn , 86 755 2322 5875 |
| Test Firm | Eric Wang, SHENZHEN CTA TESTING TECHNOLOGY CO., LTD., wangxulai@cta-test.cn , +86 755 2322 5875 |
| TCB Email | elabscert@applus.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 03/23/2023 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | CIIPC due to change the built-in power supply. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz and 40 MHz bandwidth modes. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| v2Zy1i50F9QAQNjqKGZxOg== | 2022-09-29 | Class II permissive change or modification of presently authorized equipment |
| qejlCd7x4TG7xl0oDi6XHg== | 2020-02-14 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2412-2462 MHz | 0.0470000 | 15C |
Grants
TCB Grant - Application v2Zy1i50F9QAQNjqKGZxOg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
LGAI Technological Center S.A. (APPLUS) Ronda de la Font del Carme, s/n <BR>P.O. Box 08193, Barcelona, Spain |
Date of Grant: 09/29/2022 Application Dated: 09/29/2022 |
| MakerBot Industries LLC |
| One MetroTech Center, 21st Fl |
| Brooklyn, NY 11201 |
| Attention: Barbara Spampinato , Senior Regulatory Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AUPB-MAKERBOT-S |
| Name of Grantee: | MakerBot Industries LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | 3D Printer |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.047 |
| CIIPC due to change the built-in power supply. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz and 40 MHz bandwidth modes. |
EAS Grant - Application v2Zy1i50F9QAQNjqKGZxOg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MakerBot Industries LLC One MetroTech Center, 21st Fl Brooklyn, NY 11201 United States |
Date of Grant: 09/29/2022 Application Dated: 09/29/2022 |
| Attention: Barbara Spampinato , Senior Regulatory Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AUPB-MAKERBOT-S |
| Name of Grantee: | MakerBot Industries LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | 3D Printer |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.047 |
| CIIPC due to change the built-in power supply. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz and 40 MHz bandwidth modes. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 02/14/2020 Application Dated: 02/14/2020 |
| MakerBot Industries LLC |
| One MetroTech Center, 21st Fl |
| Brooklyn, NY 11201 |
| Attention: Barbara Spampinato , Senior Regulatory Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AUPB-MAKERBOT-S |
| Name of Grantee: | MakerBot Industries LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | 3D PRINTER |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.047 |
| Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz and 40 MHz bandwidth modes. |
EAS Grant - Application qejlCd7x4TG7xl0oDi6XHg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MakerBot Industries LLC One MetroTech Center, 21st Fl Brooklyn, NY 11201 United States |
Date of Grant: 02/14/2020 Application Dated: 02/14/2020 |
| Attention: Barbara Spampinato , Senior Regulatory Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AUPB-MAKERBOT-S |
| Name of Grantee: | MakerBot Industries LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | 3D PRINTER |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.047 |
| Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz and 40 MHz bandwidth modes. |
| Mail To: |