FCC ID 2AUPL-M31

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

LGAI Technological Center S.A. (APPLUS) Ronda de la Font del Carme, s/n <BR>P.O. Box 08193, Barcelona, Spain

Date of Grant: 09/30/2021 Application Dated: 09/30/2021

Shenzhen Embstar Technology Co., Ltd.

Room 208, Building B, No. 133 Longsheng Road,

Longxin Community, Baolong Street,

Longgang District, Shenzhen, Guangdong,, China

Attention: Wu Junming , Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AUPL-M31
Name of Grantee:	Shenzhen Embstar Technology Co., Ltd.
Equipment Class:	Digital Transmission System
Notes:	Wifi AP Module
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2412.0  -  2462.0	0.084431

Limited Modular Approval. Output power listed is maximum combined conducted power.Device is a 2x2 MIMO as is described in the filing.This device contains 20 and 40 MHz signal bandwidth.The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures.OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Shenzhen Embstar Technology Co., Ltd. Room 208, Building B, No. 133 Longsheng Road, Longxin Community, Baolong Street, Longgang District, Shenzhen, Guangdong,, China

Date of Grant: 09/30/2021 Application Dated: 09/30/2021

Attention: Wu Junming , Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AUPL-M31
Name of Grantee:	Shenzhen Embstar Technology Co., Ltd.
Equipment Class:	Digital Transmission System
Notes:	Wifi AP Module
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2412.0  -  2462.0	0.084431

Limited Modular Approval. Output power listed is maximum combined conducted power.Device is a 2x2 MIMO as is described in the filing.This device contains 20 and 40 MHz signal bandwidth.The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures.OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 94F74YsmxnF4vxYgkbb3eA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

LGAI Technological Center S.A. (APPLUS) Ronda de la Font del Carme, s/n <BR>P.O. Box 08193, Barcelona, Spain

Date of Grant: 09/30/2021 Application Dated: 09/30/2021

Shenzhen Embstar Technology Co., Ltd.

Room 208, Building B, No. 133 Longsheng Road,

Longxin Community, Baolong Street,

Longgang District, Shenzhen, Guangdong,, China

Attention: Wu Junming , Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AUPL-M31
Name of Grantee:	Shenzhen Embstar Technology Co., Ltd.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Wifi AP Module
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
38 CC	15E	5180.0  -  5240.0	0.010037
38 CC	15E	5745.0  -  5825.0	0.020109

Limited Modular Approval. Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. 5.15-5.25 GHz band is restricted for client type. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures.OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee.

38:	This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Shenzhen Embstar Technology Co., Ltd. Room 208, Building B, No. 133 Longsheng Road, Longxin Community, Baolong Street, Longgang District, Shenzhen, Guangdong,, China

Date of Grant: 09/30/2021 Application Dated: 09/30/2021

Attention: Wu Junming , Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AUPL-M31
Name of Grantee:	Shenzhen Embstar Technology Co., Ltd.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Wifi AP Module
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
38 CC	15E	5180.0  -  5240.0	0.010037
38 CC	15E	5745.0  -  5825.0	0.020109

Limited Modular Approval. Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. 5.15-5.25 GHz band is restricted for client type. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures.OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee.

38:	This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC:	This device is certified pursuant to two different Part 15 rules sections.

Mail To: