FCC ID 2AUXS-VCURH1

Virtual Cockpit Unit

by Robert Bosch GmbH

Grantee Code: 2AUXS   Product Code: VCURH1
Latest application date: 2025-02-03

FCC ID Device Details

FCC ID2AUXS-VCURH1
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AUXS
Product CodeVCURH1
Applicant BusinessRobert Bosch GmbH 🇩🇪
Related Domains de.bosch.com
Equipment ClassVirtual Cockpit Unit
Test FirmPHOENIX TESTLAB GmbH

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2025-02-03
87.9-107.9 MHzClass II permissive change or modification of presently authorized equipment2025-02-03
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2025-02-03
5745-5825 MHzClass II permissive change or modification of presently authorized equipment2025-02-03
2402-2480 MHzOriginal Equipment2023-10-19
2402-2480 MHzOriginal Equipment2023-10-18
5745-5825 MHzOriginal Equipment2023-10-18
87.9-107.9 MHzOriginal Equipment2023-10-18

Exhibits

DocumentTypeAvailableFile
user manualUsers Manual2025-02-03PDF 606.2 KB
user manualUsers Manual2023-10-19PDF 575.4 KB
User ManualUsers Manual2023-10-18PDF 575.4 KB
Int PhotosInternal Photos2023-10-19PDF 1.1 MB
int photosInternal Photos2023-10-18PDF 1.1 MB
ext and int photosExternal Photos2025-02-03PDF 3.2 MB
ext photosExternal Photos2023-10-19PDF 441.7 KB
LabelID Label/Location Info2023-10-19PDF 1.4 MB
Label LocationID Label/Location Info2023-10-19PDF 113.5 KB
lable locationID Label/Location Info2023-10-18PDF 113.5 KB
Test Setup PhotosTest Setup Photos2023-10-19PDF 1.9 MB
test setup photosTest Setup Photos2023-10-18PDF 1.9 MB
test setup photosTest Report2023-10-18PDF 1.9 MB
test setup photosTest Setup Photos2023-10-18PDF 364.6 KB
Test ReportTest Report2023-10-19PDF 3.2 MB
Test ReportTest Report2023-10-18PDF 4.1 MB
Test Report BLETest Report2023-10-18PDF 2 MB
test reportTest Report2023-10-18PDF 4.7 MB
test report WLANTest Report2023-10-18PDF 4.2 MB
Attestaion letter US Agent letterAttestation Statements2025-02-03PDF 113.1 KB
Attestation Letter Coverd EquipemntAttestation Statements2025-02-03PDF 86.3 KB
Attestation Letter Covered EquipAttestation Statements2023-10-19PDF 62.6 KB
Attestation Letter US AgentAttestation Statements2023-10-19PDF 118.3 KB
INT Antenna Data sheetAttestation Statements2023-10-19PDF 1.7 MB
Attestaion letter US Agent letterAttestation Statements2023-10-18PDF 118.3 KB
Attestation Letter Covered EquipmentAttestation Statements2023-10-18PDF 62.6 KB
Ext Antenna ReportAttestation Statements2023-10-18PDF 1.1 MB
Int Antenna Data sheetAttestation Statements2023-10-18PDF 1.7 MB
ext Antenna reportAttestation Statements2023-10-18PDF 1.1 MB
int AntennaAttestation Statements2023-10-18PDF 1.7 MB
Class II ChangeCover Letter(s)2025-02-03PDF 81.9 KB
LTC RequestCover Letter(s)2025-02-03PDF 89.3 KB
LTC requestCover Letter(s)2023-10-19PDF 47.4 KB
PoA MaierCover Letter(s)2023-10-19PDF 332.2 KB
PoA PhoenixCover Letter(s)2023-10-19PDF 107.1 KB
LTC RequestCover Letter(s)2023-10-18PDF 47.4 KB
RF expsoureRF Exposure Info2025-02-03PDF 286.7 KB
MPERF Exposure Info2023-10-19PDF 263.6 KB
Block Diagram Metadata onlyBlock DiagramPDF 136 KB
SIP Schematics Metadata onlySchematicsPDF 1.1 MB
SIP schematics Metadata onlySchematicsPDF 1.1 MB
Schematics Metadata onlySchematicsPDF 3.5 MB
Schematics DB Metadata onlySchematicsPDF 1.4 MB
Schematics rev Metadata onlySchematicsPDF 3.5 MB
OD Metadata onlyOperational DescriptionPDF 30.1 KB
OD Discontinue transmission Metadata onlyOperational DescriptionPDF 30.1 KB
operational description Metadata onlyOperational DescriptionPDF 30.1 KB
operational description Metadata onlyOperational DescriptionPDF 2.6 MB
technical passport Metadata onlyOperational DescriptionPDF 2.5 MB
Declaration Software Security Metadata onlySDR Software/Security InfPDF 105.9 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 603.2 KB

Application Information

Application IDett1yvhPV+g+64NWW98+lQ==
Final Action Date2025-02-03
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0029376266
ModelVCURH1
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionVirtual Cockpit Unit
Responsible PartyDirk Zamow, Team Leader Approval, Dirk.Zamow@de.bosch.com , +49512149
Test FirmHolger Bentje, PHOENIX TESTLAB GmbH, office@phoenix-testlab.de , 49-5235-9500-24
TCB Emailvandenbosch.andre@phoenix-testlab.de
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput Power listed is max combined conducted output power. This device is approved with the incorporated unlicensed CXX, DTS and UNII portions certified under the same FCC ID. Multi-transmitter (2T2R MIMO), supporting simultaneous transmission, configurations have been evaluated as described in this filling. This is not an aftermarket device and will exclusively marketed to OEMs for factory-installation inside transportation vehicles. To comply with FCC Exposure requirements the OEM is instructed by the Grantee to assure a minimum separation distance of 20 cm between the housing where the integrated antenna is located and any human body as documented in the filing. This device supports 20, 40 and 80 BW modes (IEEE 802.11). C2PC considers the change of separation distance of Internal and Externa Antenna to comply with FCC Exposure requirements the OEM is instructed by the Grantee to assure a minimum separation distance of 4.7 cm between the external antenna and 12.93 cm between the housing where the integrated antenna is located and any human body as documented in the filing.

Applications

Application IDDatePurpose
ett1yvhPV+g+64NWW98+lQ==2025-02-03Class II permissive change or modification of presently authorized equipment
aBphNs8RhrPWw1i2mpuNnA==2025-02-03Class II permissive change or modification of presently authorized equipment
M73ICPnPlo48uxM5LiXgVg==2025-02-03Class II permissive change or modification of presently authorized equipment
D9AlcOILAlzpBQ4riM6jyQ==2025-02-03Class II permissive change or modification of presently authorized equipment
kUWss9kSBxhOBUWCcijcJg==2023-10-19Original Equipment
JmOrl/6M79w8SfqdT/bmnw==2023-10-18Original Equipment
G0ZLWXBGDVe3vxd4UC+Vcg==2023-10-18Original Equipment
6kXQNDK6IEsHi9jKYQ3a4Q==2023-10-18Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
87.9-107.9 MHz15BCC
2402-2480 MHz0.001815CCC
2402-2480 MHz0.002900015CCC
2402-2480 MHz0.029000015CCC
2412-2462 MHz0.157415CCC, MO
5180-5240 MHz0.02415ECC, MO
5180-5240 MHz0.023615ECC, MO
5745-5825 MHz0.079215ECC, MO
5745-5825 MHz0.081315ECC, MO

Grants

TCB Grant - Application M73ICPnPlo48uxM5LiXgVg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 02/03/2025

Application Dated: 02/03/2025
Robert Bosch GmbH
Robert-Bosch-Strasse 200
Hildesheim, 31139
Germany
 
Attention: Dirk Zamow , Team Leader Approval

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AUXS-VCURH1
Name of Grantee:  Robert Bosch GmbH
Equipment Class: Digital Transmission System
Notes: Virtual Cockpit Unit
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0018  
CC MO 15C 2412.0  -  2462.0 0.1574  

Output Power listed is max peak conducted (2402-2480 MHz) and max combined conducted output power (2412-2462 MHz). This device is approved with the incorporated unlicensed CXX, DSS and UNII portions certified under the same FCC ID. Multi-transmitter (2T2R MIMO), supporting simultaneous transmission, configurations have been evaluated as described in this filling. This is not an aftermarket device and will exclusively marketed to OEMs for factory-installation inside transportation vehicles. To comply with FCC Exposure requirements the OEM is instructed by the Grantee to assure a minimum separation distance of 20 cm between the housing where the integrated antenna is located, as well as between the external antenna to any human body as documented in the filing. This device supports BLE (1 and 2 Mbps) and 20 modes (IEEE 802.11).

C2PC considers the change of separation distance of Internal and Externa Antenna to comply with FCC Exposure requirements the OEM is instructed by the Grantee to assure a minimum separation distance of 4.7 cm between the external antenna and 12.93 cm between the housing where the integrated antenna is located and any human body as documented in the filing.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application M73ICPnPlo48uxM5LiXgVg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Robert Bosch GmbH
Robert-Bosch-Strasse 200
Hildesheim, 31139
Germany
  Date of Grant: 02/03/2025

Application Dated: 02/03/2025
 
Attention: Dirk Zamow , Team Leader Approval

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AUXS-VCURH1
Name of Grantee:  Robert Bosch GmbH
Equipment Class: Digital Transmission System
Notes: Virtual Cockpit Unit
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0018  
CC MO 15C 2412.0  -  2462.0 0.1574  

Output Power listed is max peak conducted (2402-2480 MHz) and max combined conducted output power (2412-2462 MHz). This device is approved with the incorporated unlicensed CXX, DSS and UNII portions certified under the same FCC ID. Multi-transmitter (2T2R MIMO), supporting simultaneous transmission, configurations have been evaluated as described in this filling. This is not an aftermarket device and will exclusively marketed to OEMs for factory-installation inside transportation vehicles. To comply with FCC Exposure requirements the OEM is instructed by the Grantee to assure a minimum separation distance of 20 cm between the housing where the integrated antenna is located, as well as between the external antenna to any human body as documented in the filing. This device supports BLE (1 and 2 Mbps) and 20 modes (IEEE 802.11).

C2PC considers the change of separation distance of Internal and Externa Antenna to comply with FCC Exposure requirements the OEM is instructed by the Grantee to assure a minimum separation distance of 4.7 cm between the external antenna and 12.93 cm between the housing where the integrated antenna is located and any human body as documented in the filing.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application kUWss9kSBxhOBUWCcijcJg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 10/19/2023

Application Dated: 10/18/2023
Robert Bosch GmbH
Robert-Bosch-Strasse 200
Hildesheim, 31139
Germany
 
Attention: Dirk Zamow , Team Leader Approval

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AUXS-VCURH1
Name of Grantee:  Robert Bosch GmbH
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Virtual Cockpit Unit
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0029  

Output Power listed is max peak conducted over all modes (Bluetooth Basic Rate and Enhanced Data Rates). This device is approved with the incorporated unlicensed CXX, DTS and UNII portions certified under the same FCC ID. Multi-transmitter (2T2R MIMO), supporting simultaneous transmission, configurations have been evaluated as described in this filling. This is not an aftermarket device and will exclusively marketed to OEMs for factory-installation inside transportation vehicles. To comply with FCC Exposure requirements the OEM is instructed by the Grantee to assure a minimum separation distance of 20 cm between the housing where the integrated antenna is located, as well as between the external antenna to any human body as documented in the filing.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application kUWss9kSBxhOBUWCcijcJg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Robert Bosch GmbH
Robert-Bosch-Strasse 200
Hildesheim, 31139
Germany
  Date of Grant: 10/19/2023

Application Dated: 10/18/2023
 
Attention: Dirk Zamow , Team Leader Approval

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AUXS-VCURH1
Name of Grantee:  Robert Bosch GmbH
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Virtual Cockpit Unit
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0029  

Output Power listed is max peak conducted over all modes (Bluetooth Basic Rate and Enhanced Data Rates). This device is approved with the incorporated unlicensed CXX, DTS and UNII portions certified under the same FCC ID. Multi-transmitter (2T2R MIMO), supporting simultaneous transmission, configurations have been evaluated as described in this filling. This is not an aftermarket device and will exclusively marketed to OEMs for factory-installation inside transportation vehicles. To comply with FCC Exposure requirements the OEM is instructed by the Grantee to assure a minimum separation distance of 20 cm between the housing where the integrated antenna is located, as well as between the external antenna to any human body as documented in the filing.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application JmOrl/6M79w8SfqdT/bmnw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 10/18/2023

Application Dated: 10/18/2023
Robert Bosch GmbH
Robert-Bosch-Strasse 200
Hildesheim, 31139
Germany
 
Attention: Dirk Zamow , Team Leader Approval

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AUXS-VCURH1
Name of Grantee:  Robert Bosch GmbH
Equipment Class: Digital Transmission System
Notes: Virtual Cockpit Unit
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0018  
CC MO 15C 2412.0  -  2462.0 0.1574  

Output Power listed is max peak conducted (2402-2480 MHz) and max combined conducted output power (2412-2462 MHz). This device is approved with the incorporated unlicensed CXX, DSS and UNII portions certified under the same FCC ID. Multi-transmitter (2T2R MIMO), supporting simultaneous transmission, configurations have been evaluated as described in this filling. This is not an aftermarket device and will exclusively marketed to OEMs for factory-installation inside transportation vehicles. To comply with FCC Exposure requirements the OEM is instructed by the Grantee to assure a minimum separation distance of 20 cm between the housing where the integrated antenna is located, as well as between the external antenna to any human body as documented in the filing. This device supports BLE (1 and 2 Mbps) and 20 modes (IEEE 802.11).

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application JmOrl/6M79w8SfqdT/bmnw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Robert Bosch GmbH
Robert-Bosch-Strasse 200
Hildesheim, 31139
Germany
  Date of Grant: 10/18/2023

Application Dated: 10/18/2023
 
Attention: Dirk Zamow , Team Leader Approval

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AUXS-VCURH1
Name of Grantee:  Robert Bosch GmbH
Equipment Class: Digital Transmission System
Notes: Virtual Cockpit Unit
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0018  
CC MO 15C 2412.0  -  2462.0 0.1574  

Output Power listed is max peak conducted (2402-2480 MHz) and max combined conducted output power (2412-2462 MHz). This device is approved with the incorporated unlicensed CXX, DSS and UNII portions certified under the same FCC ID. Multi-transmitter (2T2R MIMO), supporting simultaneous transmission, configurations have been evaluated as described in this filling. This is not an aftermarket device and will exclusively marketed to OEMs for factory-installation inside transportation vehicles. To comply with FCC Exposure requirements the OEM is instructed by the Grantee to assure a minimum separation distance of 20 cm between the housing where the integrated antenna is located, as well as between the external antenna to any human body as documented in the filing. This device supports BLE (1 and 2 Mbps) and 20 modes (IEEE 802.11).


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application G0ZLWXBGDVe3vxd4UC+Vcg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 10/18/2023

Application Dated: 10/18/2023
Robert Bosch GmbH
Robert-Bosch-Strasse 200
Hildesheim, 31139
Germany
 
Attention: Dirk Zamow , Team Leader Approval

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AUXS-VCURH1
Name of Grantee:  Robert Bosch GmbH
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Virtual Cockpit Unit
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.024  
CC MO 15E 5745.0  -  5825.0 0.0792  

Output Power listed is max combined conducted output power. This device is approved with the incorporated unlicensed CXX, DSS and DTS portions certified under the same FCC ID. Multi-transmitter (2T2R MIMO), supporting simultaneous transmission, configurations have been evaluated as described in this filling. This is not an aftermarket device and will exclusively marketed to OEMs for factory-installation inside transportation vehicles. To comply with FCC Exposure requirements the OEM is instructed by the Grantee to assure a minimum separation distance of 20 cm between the housing where the integrated antenna is located, as well as between the external antenna to any human body as documented in the filing. This device supports 20, 40 and 80 BW modes (IEEE 802.11).

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application G0ZLWXBGDVe3vxd4UC+Vcg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Robert Bosch GmbH
Robert-Bosch-Strasse 200
Hildesheim, 31139
Germany
  Date of Grant: 10/18/2023

Application Dated: 10/18/2023
 
Attention: Dirk Zamow , Team Leader Approval

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AUXS-VCURH1
Name of Grantee:  Robert Bosch GmbH
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Virtual Cockpit Unit
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.024  
CC MO 15E 5745.0  -  5825.0 0.0792  

Output Power listed is max combined conducted output power. This device is approved with the incorporated unlicensed CXX, DSS and DTS portions certified under the same FCC ID. Multi-transmitter (2T2R MIMO), supporting simultaneous transmission, configurations have been evaluated as described in this filling. This is not an aftermarket device and will exclusively marketed to OEMs for factory-installation inside transportation vehicles. To comply with FCC Exposure requirements the OEM is instructed by the Grantee to assure a minimum separation distance of 20 cm between the housing where the integrated antenna is located, as well as between the external antenna to any human body as documented in the filing. This device supports 20, 40 and 80 BW modes (IEEE 802.11).


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application ett1yvhPV+g+64NWW98+lQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 02/03/2025

Application Dated: 02/03/2025
Robert Bosch GmbH
Robert-Bosch-Strasse 200
Hildesheim, 31139
Germany
 
Attention: Dirk Zamow , Team Leader Approval

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AUXS-VCURH1
Name of Grantee:  Robert Bosch GmbH
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Virtual Cockpit Unit
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.029  

Output Power listed is max combined conducted output power. This device is approved with the incorporated unlicensed CXX, DTS and UNII portions certified under the same FCC ID. Multi-transmitter (2T2R MIMO), supporting simultaneous transmission, configurations have been evaluated as described in this filling. This is not an aftermarket device and will exclusively marketed to OEMs for factory-installation inside transportation vehicles. To comply with FCC Exposure requirements the OEM is instructed by the Grantee to assure a minimum separation distance of 20 cm between the housing where the integrated antenna is located and any human body as documented in the filing. This device supports 20, 40 and 80 BW modes (IEEE 802.11).

C2PC considers the change of separation distance of Internal and Externa Antenna to comply with FCC Exposure requirements the OEM is instructed by the Grantee to assure a minimum separation distance of 4.7 cm between the external antenna and 12.93 cm between the housing where the integrated antenna is located and any human body as documented in the filing.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application ett1yvhPV+g+64NWW98+lQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Robert Bosch GmbH
Robert-Bosch-Strasse 200
Hildesheim, 31139
Germany
  Date of Grant: 02/03/2025

Application Dated: 02/03/2025
 
Attention: Dirk Zamow , Team Leader Approval

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AUXS-VCURH1
Name of Grantee:  Robert Bosch GmbH
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Virtual Cockpit Unit
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.029  

Output Power listed is max combined conducted output power. This device is approved with the incorporated unlicensed CXX, DTS and UNII portions certified under the same FCC ID. Multi-transmitter (2T2R MIMO), supporting simultaneous transmission, configurations have been evaluated as described in this filling. This is not an aftermarket device and will exclusively marketed to OEMs for factory-installation inside transportation vehicles. To comply with FCC Exposure requirements the OEM is instructed by the Grantee to assure a minimum separation distance of 20 cm between the housing where the integrated antenna is located and any human body as documented in the filing. This device supports 20, 40 and 80 BW modes (IEEE 802.11).

C2PC considers the change of separation distance of Internal and Externa Antenna to comply with FCC Exposure requirements the OEM is instructed by the Grantee to assure a minimum separation distance of 4.7 cm between the external antenna and 12.93 cm between the housing where the integrated antenna is located and any human body as documented in the filing.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application D9AlcOILAlzpBQ4riM6jyQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 02/03/2025

Application Dated: 02/03/2025
Robert Bosch GmbH
Robert-Bosch-Strasse 200
Hildesheim, 31139
Germany
 
Attention: Dirk Zamow , Team Leader Approval

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AUXS-VCURH1
Name of Grantee:  Robert Bosch GmbH
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Virtual Cockpit Unit
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0236  
CC MO 15E 5745.0  -  5825.0 0.0813  

Output Power listed is max combined conducted output power. This device is approved with the incorporated unlicensed CXX, DSS and DTS portions certified under the same FCC ID. Multi-transmitter (2T2R MIMO), supporting simultaneous transmission, configurations have been evaluated as described in this filling. This is not an aftermarket device and will exclusively marketed to OEMs for factory-installation inside transportation vehicles. To comply with FCC Exposure requirements the OEM is instructed by the Grantee to assure a minimum separation distance of 20 cm between the housing where the integrated antenna is located, as well as between the external antenna to any human body as documented in the filing. This device supports 20, 40 and 80 BW modes (IEEE 802.11).

C2PC considers the change of separation distance of Internal and Externa Antenna to comply with FCC Exposure requirements the OEM is instructed by the Grantee to assure a minimum separation distance of 4.7 cm between the external antenna and 12.93 cm between the housing where the integrated antenna is located and any human body as documented in the filing.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application D9AlcOILAlzpBQ4riM6jyQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Robert Bosch GmbH
Robert-Bosch-Strasse 200
Hildesheim, 31139
Germany
  Date of Grant: 02/03/2025

Application Dated: 02/03/2025
 
Attention: Dirk Zamow , Team Leader Approval

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AUXS-VCURH1
Name of Grantee:  Robert Bosch GmbH
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Virtual Cockpit Unit
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0236  
CC MO 15E 5745.0  -  5825.0 0.0813  

Output Power listed is max combined conducted output power. This device is approved with the incorporated unlicensed CXX, DSS and DTS portions certified under the same FCC ID. Multi-transmitter (2T2R MIMO), supporting simultaneous transmission, configurations have been evaluated as described in this filling. This is not an aftermarket device and will exclusively marketed to OEMs for factory-installation inside transportation vehicles. To comply with FCC Exposure requirements the OEM is instructed by the Grantee to assure a minimum separation distance of 20 cm between the housing where the integrated antenna is located, as well as between the external antenna to any human body as documented in the filing. This device supports 20, 40 and 80 BW modes (IEEE 802.11).

C2PC considers the change of separation distance of Internal and Externa Antenna to comply with FCC Exposure requirements the OEM is instructed by the Grantee to assure a minimum separation distance of 4.7 cm between the external antenna and 12.93 cm between the housing where the integrated antenna is located and any human body as documented in the filing.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application aBphNs8RhrPWw1i2mpuNnA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 02/03/2025

Application Dated: 02/03/2025
Robert Bosch GmbH
Robert-Bosch-Strasse 200
Hildesheim, 31139
Germany
 
Attention: Dirk Zamow , Team Leader Approval

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AUXS-VCURH1
Name of Grantee:  Robert Bosch GmbH
Equipment Class: Communications Rcvr for use w/ licensed Tx and CBs
Notes: Virtual Cockpit Unit
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B 87.9  -  107.9

This device is approved with the incorporated unlicensed DSS, DTS and UNII portions certified under the same FCC ID. This is not an aftermarket device and will exclusively marketed to OEMs for factory-installation inside transportation vehicles. To comply with FCC Exposure requirements the OEM is instructed by the Grantee to assure a minimum separation distance of 20 cm between the housing where the integrated antenna is located, as well as between the external antenna to any human body as documented in the filing.

C2PC considers the change of separation distance of Internal and Externa Antenna to comply with FCC Exposure requirements the OEM is instructed by the Grantee to assure a minimum separation distance of 4.7 cm between the external antenna and 12.93 cm between the housing where the integrated antenna is located and any human body as documented in the filing.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application aBphNs8RhrPWw1i2mpuNnA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Robert Bosch GmbH
Robert-Bosch-Strasse 200
Hildesheim, 31139
Germany
  Date of Grant: 02/03/2025

Application Dated: 02/03/2025
 
Attention: Dirk Zamow , Team Leader Approval

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AUXS-VCURH1
Name of Grantee:  Robert Bosch GmbH
Equipment Class: Communications Rcvr for use w/ licensed Tx and CBs
Notes: Virtual Cockpit Unit
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B 87.9  -  107.9

This device is approved with the incorporated unlicensed DSS, DTS and UNII portions certified under the same FCC ID. This is not an aftermarket device and will exclusively marketed to OEMs for factory-installation inside transportation vehicles. To comply with FCC Exposure requirements the OEM is instructed by the Grantee to assure a minimum separation distance of 20 cm between the housing where the integrated antenna is located, as well as between the external antenna to any human body as documented in the filing.

C2PC considers the change of separation distance of Internal and Externa Antenna to comply with FCC Exposure requirements the OEM is instructed by the Grantee to assure a minimum separation distance of 4.7 cm between the external antenna and 12.93 cm between the housing where the integrated antenna is located and any human body as documented in the filing.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 6kXQNDK6IEsHi9jKYQ3a4Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 10/18/2023

Application Dated: 10/18/2023
Robert Bosch GmbH
Robert-Bosch-Strasse 200
Hildesheim, 31139
Germany
 
Attention: Dirk Zamow , Team Leader Approval

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AUXS-VCURH1
Name of Grantee:  Robert Bosch GmbH
Equipment Class: Communications Rcvr for use w/ licensed Tx and CBs
Notes: Virtual Cockpit Unit
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B 87.9  -  107.9

This device is approved with the incorporated unlicensed DSS, DTS and UNII portions certified under the same FCC ID. This is not an aftermarket device and will exclusively marketed to OEMs for factory-installation inside transportation vehicles. To comply with FCC Exposure requirements the OEM is instructed by the Grantee to assure a minimum separation distance of 20 cm between the housing where the integrated antenna is located, as well as between the external antenna to any human body as documented in the filing.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 6kXQNDK6IEsHi9jKYQ3a4Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Robert Bosch GmbH
Robert-Bosch-Strasse 200
Hildesheim, 31139
Germany
  Date of Grant: 10/18/2023

Application Dated: 10/18/2023
 
Attention: Dirk Zamow , Team Leader Approval

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AUXS-VCURH1
Name of Grantee:  Robert Bosch GmbH
Equipment Class: Communications Rcvr for use w/ licensed Tx and CBs
Notes: Virtual Cockpit Unit
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B 87.9  -  107.9

This device is approved with the incorporated unlicensed DSS, DTS and UNII portions certified under the same FCC ID. This is not an aftermarket device and will exclusively marketed to OEMs for factory-installation inside transportation vehicles. To comply with FCC Exposure requirements the OEM is instructed by the Grantee to assure a minimum separation distance of 20 cm between the housing where the integrated antenna is located, as well as between the external antenna to any human body as documented in the filing.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: