FCC ID 2AV2N-SR1021FS

Wireless Router

by Fiberhome Telecommunication Technologies Co.,Ltd.

Grantee Code: 2AV2N   Product Code: SR1021FS
Latest application date: 2023-03-19

FCC ID Device Details

FCC ID2AV2N-SR1021FS
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AV2N
Product CodeSR1021FS
Applicant BusinessFiberhome Telecommunication Technologies Co.,Ltd. 🇨🇳
Related Domains fiberhome.com
Equipment ClassWireless Router
Test FirmGuangzhou GRG Metrology & Test Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5745-5825 MHzOriginal Equipment2023-03-19
2412-2462 MHzOriginal Equipment2023-03-19

Exhibits

DocumentTypeAvailableFile
User manualUsers Manual2023-09-12PDF 5.6 MB
Internal photoInternal Photos2023-09-12PDF 3.3 MB
Internal photosInternal Photos2023-09-12PDF 3.3 MB
External photoExternal Photos2023-09-12PDF 919.7 KB
Label and locationID Label/Location Info2023-03-19PDF 1.5 MB
label and locationID Label/Location Info2023-03-19PDF 1.5 MB
Test setup photoTest Setup Photos2023-09-12PDF 294.6 KB
Antenna specTest Report2023-03-19PDF 2.4 MB
FCC Part 15.407 DFS Test reportTest Report2023-03-19PDF 4 MB
FCC Part 15.407 Test report Part_10Test Report2023-03-19PDF 4.9 MB
FCC Part 15.407 Test report Part_11Test Report2023-03-19PDF 4.9 MB
FCC Part 15.407 Test report Part_12Test Report2023-03-19PDF 5.8 MB
FCC Part 15.407 Test report Part_13Test Report2023-03-19PDF 5.9 MB
FCC Part 15.407 Test report Part_14Test Report2023-03-19PDF 2.8 MB
FCC Part 15.407 Test report Part_8Test Report2023-03-19PDF 4.9 MB
FCC Part 15.407 Test report Part_9Test Report2023-03-19PDF 5 MB
FCC part 15.407 Test report Part_1Test Report2023-03-19PDF 4.4 MB
FCC part 15.407 Test report Part_2Test Report2023-03-19PDF 5.2 MB
FCC part 15.407 Test report Part_3Test Report2023-03-19PDF 4.4 MB
FCC part 15.407 Test report Part_4Test Report2023-03-19PDF 4.6 MB
FCC part 15.407 Test report Part_5Test Report2023-03-19PDF 3.1 MB
FCC part 15.407 Test report Part_6Test Report2023-03-19PDF 4.1 MB
FCC part 15.407 Test report Part_7Test Report2023-03-19PDF 5 MB
Test reportTest Report2023-03-19PDF 5.3 MB
Attestation statementAttestation Statements2023-03-19PDF 302.8 KB
USA Agent for Service of ProcessAttestation Statements2023-03-19PDF 550.4 KB
Authorization letterCover Letter(s)2023-03-19PDF 207.2 KB
Confidentiality Request letterCover Letter(s)2023-03-19PDF 300.4 KB
FCC Software Configuration Control DeclarationCover Letter(s)2023-03-19PDF 214.8 KB
RF exposureRF Exposure Info2023-03-19PDF 1.8 MB
Block diagram Metadata onlyBlock DiagramPDF 3.5 MB
Schematics Metadata onlySchematicsPDF 4.3 MB
Operation description Metadata onlyOperational DescriptionPDF 128.7 KB
operation description Metadata onlyOperational DescriptionPDF 128.7 KB
Software security requirement Metadata onlySDR Software/Security InfPDF 1.1 MB

Application Information

Application IDLDUdZ3zlqSI0iH1YIBBeQw==
Final Action Date2023-03-19
Application PurposeOriginal Equipment
Applicant FRN0029376472
ModelSR1021FS
Frequency Range5745-5825 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionWireless Router
Responsible PartyMina Wu, Product certification manager, mwu@fiberhome.com , 13667257987
Technical ContactFiberhome Telecommunication Technologies Co., Ltd., mwu@fiberhome.com
Test FirmFrank Chen, Guangzhou GRG Metrology & Test Co., Ltd., frank.chen@grgtest.com , 86-20-66830999-8358
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date09/12/2023
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsOutput power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 3x3 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
LDUdZ3zlqSI0iH1YIBBeQw==2023-03-19Original Equipment
DaNyuzMQBncVuwM5ncbaNg==2023-03-19Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.152000015CCC, MO
5180-5240 MHz0.023415ECC, MO
5260-5320 MHz0.021315ECC, MO, ND
5500-5700 MHz0.022115ECC, MO, ND
5745-5825 MHz0.023315ECC, MO

Grants

TCB Grant - Application LDUdZ3zlqSI0iH1YIBBeQw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 03/19/2023

Application Dated: 03/15/2023
Fiberhome Telecommunication Technologies Co.,Ltd.
No.88 Youkeyuan Road, Hongshan District
Wuhan,Hubei, 430205
China
 
Attention: Mina Wu , Product certification manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AV2N-SR1021FS
Name of Grantee:  Fiberhome Telecommunication Technologies Co.,Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0234  
CC MO ND 15E 5260.0  -  5320.0 0.0213  
CC MO ND 15E 5500.0  -  5700.0 0.0221  
CC MO 15E 5745.0  -  5825.0 0.0233  

Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 3x3 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application LDUdZ3zlqSI0iH1YIBBeQw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Fiberhome Telecommunication Technologies Co.,Ltd.
No.88 Youkeyuan Road, Hongshan District
Wuhan,Hubei, 430205
China
  Date of Grant: 03/19/2023

Application Dated: 03/15/2023
 
Attention: Mina Wu , Product certification manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AV2N-SR1021FS
Name of Grantee:  Fiberhome Telecommunication Technologies Co.,Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0234  
CC MO ND 15E 5260.0  -  5320.0 0.0213  
CC MO ND 15E 5500.0  -  5700.0 0.0221  
CC MO 15E 5745.0  -  5825.0 0.0233  

Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 3x3 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application DaNyuzMQBncVuwM5ncbaNg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 03/19/2023

Application Dated: 03/15/2023
Fiberhome Telecommunication Technologies Co.,Ltd.
No.88 Youkeyuan Road, Hongshan District
Wuhan,Hubei, 430205
China
 
Attention: Mina Wu , Product certification manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AV2N-SR1021FS
Name of Grantee:  Fiberhome Telecommunication Technologies Co.,Ltd.
Equipment Class: Digital Transmission System
Notes: Wireless Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.152  

Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application DaNyuzMQBncVuwM5ncbaNg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Fiberhome Telecommunication Technologies Co.,Ltd.
No.88 Youkeyuan Road, Hongshan District
Wuhan,Hubei, 430205
China
  Date of Grant: 03/19/2023

Application Dated: 03/15/2023
 
Attention: Mina Wu , Product certification manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AV2N-SR1021FS
Name of Grantee:  Fiberhome Telecommunication Technologies Co.,Ltd.
Equipment Class: Digital Transmission System
Notes: Wireless Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.152  

Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: