FCC ID 2AV38-BTMRDRA
BTM-RDR-A is a commercial lighting controller module that communicates with other devices in the lighting control system using Bluetooth meshing technology. A Doppler field disturbance sensor detects motion for occupancy.
by Douglas Lighting Controls, Inc.
Grantee Code: 2AV38 Product Code: BTMRDRA
Latest application date: 2021-02-19
FCC ID Device Details
| FCC ID | 2AV38-BTMRDRA |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AV38 |
| Product Code | BTMRDRA |
| Applicant Business | Douglas Lighting Controls, Inc. 🇨🇦 |
| Related Domains |  douglaslightingcontrols.com |
| Equipment Class | BTM-RDR-A is a commercial lighting controller module that communicates with other devices in the lighting control system using Bluetooth meshing technology. A Doppler field disturbance sensor detects motion for occupancy. |
| Test Firm | QAI LABORATORIES LTD. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-02-19 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: W7ZB1010SP0 Grant Date: 05/19/2015 | 2021-02-05 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2021-02-19 | PDF 1 MB |
| Internal Photos | Internal Photos | 2021-02-19 | PDF 227.5 KB |
| External Photos | External Photos | 2021-02-19 | PDF 518.6 KB |
| External Photos | External Photos | 2021-02-05 | PDF 227.5 KB |
| Label | ID Label/Location Info | 2021-02-19 | PDF 107.8 KB |
| Label Location | ID Label/Location Info | 2021-02-19 | PDF 302 KB |
| Label Location | ID Label/Location Info | 2021-02-05 | PDF 227.5 KB |
| Test Setup Photos | Test Setup Photos | 2021-02-19 | PDF 570.5 KB |
| Test Report | Test Report | 2021-02-19 | PDF 1.2 MB |
| Confidentiality Request | Cover Letter(s) | 2021-02-19 | PDF 421.4 KB |
| Cover Letter | Cover Letter(s) | 2021-02-19 | PDF 126.9 KB |
| POA Letter | Cover Letter(s) | 2021-02-19 | PDF 669.3 KB |
| CEL Change in ID Authorization | Cover Letter(s) | 2021-02-05 | PDF 67.2 KB |
| Cover Letter | Cover Letter(s) | 2021-02-05 | PDF 590.3 KB |
| POA | Cover Letter(s) | 2021-02-05 | PDF 669.3 KB |
Application Information
| Application ID | vPf7Cs3YNTOo7BVV22D9vQ== |
|---|---|
| Final Action Date | 2021-02-19 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0029395191 |
| Model | -BTMRDRA |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | BTM-RDR-A is a commercial lighting controller module that communicates with other devices in the lighting control system using Bluetooth meshing technology. A Doppler field disturbance sensor detects motion for occupancy. |
| Responsible Party | Glen Tracey, Director IoT Systems, gtracey@douglaslightingcontrols.com , 8778732797 |
| Test Firm | Parminder Singh, QAI LABORATORIES LTD., psingh@qai.org  , 604-527-8378 |
| TCB Email | tei@timcoengr.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | Yes |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power output listed is conducted. Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) use for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multitransmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance C2PC: Addition of a custom bent monopole antenna and holder for the Bluetooth module to provide better transmit and receive performance when the module is mounted next to a ground plane. Co-located with module, FCC ID:2ADDD-FFV580P02A. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| vPf7Cs3YNTOo7BVV22D9vQ== | 2021-02-19 | Class II permissive change or modification of presently authorized equipment |
| 5tCpIida/Hv79OHmX2UO2w== | 2021-02-05 | Change in identification of presently authorized equipment. Original FCC ID: W7ZB1010SP0 Grant Date: 05/19/2015 |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2402-2480 MHz | 0.0070000 | 15C |
Grants
TCB Grant - Application vPf7Cs3YNTOo7BVV22D9vQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 02/19/2021 Application Dated: 02/19/2021 |
| Douglas Lighting Controls, Inc. |
| 280-3605 Gilmore Way |
| Burnaby, V5G4X5 Canada |
| Attention: Glen Tracey , Director IoT Systems |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AV38-BTMRDRA |
| Name of Grantee: | Douglas Lighting Controls, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | BTM-RDR-A is a commercial lighting controller module that communicates with other devices in the lighting control system using Bluetooth meshing technology. A Doppler field disturbance sensor detects motion for occupancy. |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.007 |
| Power output listed is conducted. Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) use for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multitransmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance C2PC: Addition of a custom bent monopole antenna and holder for the Bluetooth module to provide better transmit and receive performance when the module is mounted next to a ground plane. Co-located with module, FCC ID:2ADDD-FFV580P02A. |
EAS Grant - Application vPf7Cs3YNTOo7BVV22D9vQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Douglas Lighting Controls, Inc. 280-3605 Gilmore Way Burnaby, V5G4X5 Canada |
Date of Grant: 02/19/2021 Application Dated: 02/19/2021 |
| Attention: Glen Tracey , Director IoT Systems |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AV38-BTMRDRA |
| Name of Grantee: | Douglas Lighting Controls, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | BTM-RDR-A is a commercial lighting controller module that communicates with other devices in the lighting control system using Bluetooth meshing technology. A Doppler field disturbance sensor detects motion for occupancy. |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.007 |
| Power output listed is conducted. Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) use for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multitransmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance C2PC: Addition of a custom bent monopole antenna and holder for the Bluetooth module to provide better transmit and receive performance when the module is mounted next to a ground plane. Co-located with module, FCC ID:2ADDD-FFV580P02A. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 02/05/2021 Application Dated: 02/05/2021 |
| Douglas Lighting Controls, Inc. |
| 280-3605 Gilmore Way |
| Burnaby, V5G4X5 Canada |
| Attention: Glen Tracey , Director IoT Systems |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AV38-BTMRDRA |
| Name of Grantee: | Douglas Lighting Controls, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | BTM-RDR-A is a commercial lighting controller module that communicates with other devices in the lighting control system using Bluetooth meshing technology. A Doppler field disturbance sensor detects motion for occupancy. |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.007 |
| Power output listed is conducted. Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) use for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multitransmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance |
EAS Grant - Application 5tCpIida/Hv79OHmX2UO2w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Douglas Lighting Controls, Inc. 280-3605 Gilmore Way Burnaby, V5G4X5 Canada |
Date of Grant: 02/05/2021 Application Dated: 02/05/2021 |
| Attention: Glen Tracey , Director IoT Systems |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AV38-BTMRDRA |
| Name of Grantee: | Douglas Lighting Controls, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | BTM-RDR-A is a commercial lighting controller module that communicates with other devices in the lighting control system using Bluetooth meshing technology. A Doppler field disturbance sensor detects motion for occupancy. |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.007 |
| Power output listed is conducted. Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) use for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multitransmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance |
| Mail To: |