FCC ID 2AV5VBL-M8723DS1
IEEE 802.11b/g/n (1T1R) SDIO WIFI and BT Module
by Robart GmbH
Grantee Code: 2AV5V Product Code: BLM8723DS1
Latest application date: 2020-05-07
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2020-05-07 |
| 2402-2480 MHz | Original Equipment | 2020-05-07 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2020-05-07 | PDF 1.2 MB |
| Internal Photos | Internal Photos | 2020-05-07 | PDF 598.1 KB |
| Internal photos | Internal Photos | 2020-05-07 | PDF 598.1 KB |
| External photos | External Photos | 2020-05-07 | PDF 793.4 KB |
| Label and Location | ID Label/Location Info | 2020-05-07 | PDF 195.6 KB |
| label and label location | ID Label/Location Info | 2020-05-07 | PDF 195.6 KB |
| Test Setup Photos | Test Setup Photos | 2020-05-07 | PDF 252 KB |
| Test Report-DSS | Test Report | 2020-05-07 | PDF 5.7 MB |
| Test Report-DTS-2G4WLAN | Test Report | 2020-05-07 | PDF 4.3 MB |
| Test Report-DTS-BLE | Test Report | 2020-05-07 | PDF 1.5 MB |
| FCC Confidentiality request letter | Cover Letter(s) | 2020-05-07 | PDF 69.4 KB |
| FCC Declaration of Disable WLAN Channel 12 and 13 | Cover Letter(s) | 2020-05-07 | PDF 137.1 KB |
| FCC POA | Cover Letter(s) | 2020-05-07 | PDF 59.8 KB |
| Limited Modular Approval Request Letter | Cover Letter(s) | 2020-05-07 | PDF 67.6 KB |
| RF Exposure Info-MPE Report | RF Exposure Info | 2020-05-07 | PDF 278.5 KB |
| RF exposure info-MPE Report | RF Exposure Info | 2020-05-07 | PDF 278.5 KB |
| Block diagram Metadata only | Block Diagram | PDF 167.5 KB | |
| Schematic Metadata only | Schematics | PDF 16.8 KB | |
| Declaration concerning Antenna Specification Metadata only | Operational Description | PDF 112.5 KB | |
| Operation Description Metadata only | Operational Description | PDF 161.9 KB |
Application Information
| Application ID | dYwn1fWN6t1VniMalq3CnQ== |
|---|---|
| Final Action Date | 2020-05-07 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0029412368 |
| Model | BL-M8723DS1 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | IEEE 802.11b/g/n (1T1R) SDIO WIFI and BT Module |
| Responsible Party | Friedrich Wiesinger, Manager, Friedrich.Wiesinger@robart.cc  , +4373294444033 |
| Test Firm | Junwen Liu, Shenzhen Global Test Service Co., Ltd., liujunwen@gtscert.com  , 0755-28717088-868 |
| TCB Email | joergkusig@eurofins.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Limited Single Modular Approval. Output Power listed is peak conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The maximum antenna gain is 2.0dBi. Only those antenna tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| dYwn1fWN6t1VniMalq3CnQ== | 2020-05-07 | Original Equipment |
| Zb/G4KEXDcNLKDP/Ept/rQ== | 2020-05-07 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application Zb/G4KEXDcNLKDP/Ept/rQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Eurofins Product Service GmbH Storkower Strasse 38c D-15526 Reichenwalde, Germany |
Date of Grant: 05/07/2020 Application Dated: 05/07/2020 |
| Robart GmbH |
| Friedhofstrasse 4, 4020 Linz, Austria, Europe |
| Linz, 4020 Austria |
| Attention: Friedrich Wiesinger , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AV5VBL-M8723DS1 |
| Name of Grantee: | Robart GmbH |
| Equipment Class: | Digital Transmission System |
| Notes: | IEEE 802.11b/g/n (1T1R) SDIO WIFI and BT Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.001 | |||
| 15C | 2412.0 - 2462.0 | 0.0483 | |||
| 15C | 2422.0 - 2452.0 | 0.0283 |
| Limited Single Modular Approval. Output Power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The maximum antenna gain is 2.0dBi. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. |
EAS Grant - Application Zb/G4KEXDcNLKDP/Ept/rQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Robart GmbH Friedhofstrasse 4, 4020 Linz, Austria, Europe Linz, 4020 Austria |
Date of Grant: 05/07/2020 Application Dated: 05/07/2020 |
| Attention: Friedrich Wiesinger , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AV5VBL-M8723DS1 |
| Name of Grantee: | Robart GmbH |
| Equipment Class: | Digital Transmission System |
| Notes: | IEEE 802.11b/g/n (1T1R) SDIO WIFI and BT Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.001 | |||
| 15C | 2412.0 - 2462.0 | 0.0483 | |||
| 15C | 2422.0 - 2452.0 | 0.0283 |
| Limited Single Modular Approval. Output Power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The maximum antenna gain is 2.0dBi. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Eurofins Product Service GmbH Storkower Strasse 38c D-15526 Reichenwalde, Germany |
Date of Grant: 05/07/2020 Application Dated: 05/07/2020 |
| Robart GmbH |
| Friedhofstrasse 4, 4020 Linz, Austria, Europe |
| Linz, 4020 Austria |
| Attention: Friedrich Wiesinger , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AV5VBL-M8723DS1 |
| Name of Grantee: | Robart GmbH |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | IEEE 802.11b/g/n (1T1R) SDIO WIFI and BT Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0057 |
| Limited Single Modular Approval. Output Power listed is peak conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The maximum antenna gain is 2.0dBi. Only those antenna tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. |
EAS Grant - Application dYwn1fWN6t1VniMalq3CnQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Robart GmbH Friedhofstrasse 4, 4020 Linz, Austria, Europe Linz, 4020 Austria |
Date of Grant: 05/07/2020 Application Dated: 05/07/2020 |
| Attention: Friedrich Wiesinger , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AV5VBL-M8723DS1 |
| Name of Grantee: | Robart GmbH |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | IEEE 802.11b/g/n (1T1R) SDIO WIFI and BT Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0057 |
| Limited Single Modular Approval. Output Power listed is peak conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The maximum antenna gain is 2.0dBi. Only those antenna tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. |
| Mail To: |