FCC ID 2AV9NEMBODIEDMOXIEA

Embodied Moxie

by Embodied, Inc.

Grantee Code: 2AV9N   Product Code: EMBODIEDMOXIEA
Latest application date: 2020-07-14

FCC ID Device Details

FCC ID2AV9NEMBODIEDMOXIEA
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AV9N
Product CodeEMBODIEDMOXIEA
Applicant BusinessEmbodied, Inc. 🇺🇸
Related Domains embodied.me intertek.com
Equipment ClassEmbodied Moxie
Test FirmIntertek Testing Services Hong Kong Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2020-07-14
5180-5240 MHzOriginal Equipment2020-07-14

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2021-01-11PDF 535.2 KB
Internal PhotosInternal Photos2021-01-11PDF 2.1 MB
External PhotosExternal Photos2021-01-11PDF 144.4 KB
Label Artwork and LocationID Label/Location Info2020-07-14PDF 1.4 MB
Conducted EmissionTest Setup Photos2021-01-11PDF 151.3 KB
Radiated EmissionTest Setup Photos2021-01-11PDF 223.8 KB
SAR Config PhotosTest Setup Photos2021-01-11PDF 77.3 KB
Test ReportTest Report2020-07-14PDF 842.2 KB
Test ReportTest Report2020-07-14PDF 3.6 MB
Test ReportTest Report2020-07-14PDF 912 KB
Test reportTest Report2020-07-14PDF 747.6 KB
Confidentiality RequestCover Letter(s)2020-07-14PDF 144.2 KB
Letter of AgencyCover Letter(s)2020-07-14PDF 109.2 KB
SARRF Exposure Info2020-07-14PDF 3.3 MB
Block Diagram Metadata onlyBlock DiagramPDF 102.4 KB
Circuit Diagram Metadata onlySchematicsPDF 2.6 MB
Technical Description Metadata onlyOperational DescriptionPDF 70.9 KB

Application Information

Application IDrWPe4pO5KLZiQy9db2p47Q==
Final Action Date2020-07-14
Application PurposeOriginal Equipment
Applicant FRN0029503356
ModelEMBODIEDMOXIEA
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionEmbodied Moxie
Responsible PartyYuki Witkowski, Director of Manufacturing and Supply Chain, yuki.witkowski@embodied.me , 8054444812
AgentTim Tim Tim, Intertek Testing Services Hong Kong Ltd.
Technical ContactTim Lee, Intertek Testing Services Hong Kong Ltd., tim.st.lee@intertek.com , (852) 2173 8888
Non-Technical ContactTim Lee, Intertek Testing Services Hong Kong Ltd., tim.st.lee@intertek.com , (852) 2173 8888
Test FirmBilly Chow, Intertek Testing Services Hong Kong Ltd., billy.chow@intertek.com , 85221738528
TCB EmailTCB_Admin@intertek.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date01/11/2021
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsOutput power listed is conducted. This device must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This device has been tested for SAR compliance for head and near body use conditions. End-users must be informed of the operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head and body exposure conditions are <0.10 W/kg and 0.18 W/kg, respectively. This device has a 20 MHz and 40 MHz bandwidth modes.

Applications

Application IDDatePurpose
rWPe4pO5KLZiQy9db2p47Q==2020-07-14Original Equipment
C/qKBtFX8r4LlChks//MKQ==2020-07-14Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.097700015C28, CC
5180-5240 MHz0.08115E28, CC
5745-5825 MHz0.04315E28, CC

Grants

TCB Grant - Application rWPe4pO5KLZiQy9db2p47Q==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Intertek Testing Services NA, Inc.
70 Codman Hill Road
Boxborough, MA 01719
Date of Grant: 07/14/2020

Application Dated: 07/14/2020
Embodied, Inc.
385 E Colorado Blvd
Ste 110
Pasadena, CA 91101
 
Attention: Yuki Witkowski , Director of Manufacturing and Supply Chain

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AV9NEMBODIEDMOXIEA
Name of Grantee:  Embodied, Inc.
Equipment Class: Digital Transmission System
Notes: Embodied Moxie
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
28 CC 15C 2412.0  -  2462.0 0.0977  

Output power listed is conducted. This device must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This device has been tested for SAR compliance for head and near body use conditions. End-users must be informed of the operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head and body exposure conditions are <0.10 W/kg and 0.18 W/kg, respectively. This device has a 20 MHz and 40 MHz bandwidth modes.

28: An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application rWPe4pO5KLZiQy9db2p47Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Embodied, Inc.
385 E Colorado Blvd Ste 110
Pasadena, CA 91101
United States
  Date of Grant: 07/14/2020

Application Dated: 07/14/2020
 
Attention: Yuki Witkowski , Director of Manufacturing and Supply Chain

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AV9NEMBODIEDMOXIEA
Name of Grantee:  Embodied, Inc.
Equipment Class: Digital Transmission System
Notes: Embodied Moxie
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
28 CC 15C 2412.0  -  2462.0 0.0977  

Output power listed is conducted. This device must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This device has been tested for SAR compliance for head and near body use conditions. End-users must be informed of the operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head and body exposure conditions are <0.10 W/kg and 0.18 W/kg, respectively. This device has a 20 MHz and 40 MHz bandwidth modes.


28: An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application C/qKBtFX8r4LlChks//MKQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Intertek Testing Services NA, Inc.
70 Codman Hill Road
Boxborough, MA 01719
Date of Grant: 07/14/2020

Application Dated: 07/14/2020
Embodied, Inc.
385 E Colorado Blvd
Ste 110
Pasadena, CA 91101
 
Attention: Yuki Witkowski , Director of Manufacturing and Supply Chain

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AV9NEMBODIEDMOXIEA
Name of Grantee:  Embodied, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Embodied Moxie
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
28 CC 15E 5180.0  -  5240.0 0.081  
28 CC 15E 5745.0  -  5825.0 0.043  

Output power listed is conducted. This device must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This device has been tested for SAR compliance for head and near body use conditions. End-users must be informed of the operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head and body exposure conditions are <0.10 W/kg and 0.33 W/kg, respectively. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth modes.

28: An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application C/qKBtFX8r4LlChks//MKQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Embodied, Inc.
385 E Colorado Blvd Ste 110
Pasadena, CA 91101
United States
  Date of Grant: 07/14/2020

Application Dated: 07/14/2020
 
Attention: Yuki Witkowski , Director of Manufacturing and Supply Chain

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AV9NEMBODIEDMOXIEA
Name of Grantee:  Embodied, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Embodied Moxie
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
28 CC 15E 5180.0  -  5240.0 0.081  
28 CC 15E 5745.0  -  5825.0 0.043  

Output power listed is conducted. This device must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This device has been tested for SAR compliance for head and near body use conditions. End-users must be informed of the operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head and body exposure conditions are <0.10 W/kg and 0.33 W/kg, respectively. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth modes.


28: An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: