1. FCC ID
  2. 2AVDG
  3. 2AVDG-80012

FCC ID 2AVDG-80012

Snapmaker Modular 3D Printer

by Shenzhen Snapmaker Technologies Co., Ltd.

Grantee Code: 2AVDG   Product Code: 80012
Latest application date: 2019-12-27

FCC ID Device Details

FCC ID2AVDG-80012
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AVDG
Product Code80012
Applicant BusinessShenzhen Snapmaker Technologies Co., Ltd. 🇨🇳
Related Domains snapmaker.com
Equipment ClassSnapmaker Modular 3D Printer
Test FirmShenzhen Toby Technology Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2019-12-27
2412-2462 MHzOriginal Equipment2019-12-27
5180-5240 MHzOriginal Equipment2019-12-27

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2019-12-27PDF 4 MB
Internal PhotosInternal Photos2019-12-27PDF 1.1 MB
External PhotosExternal Photos2019-12-27PDF 949.8 KB
FCC ID LabelID Label/Location Info2019-12-27PDF 173.8 KB
FCC ID Label LocationID Label/Location Info2019-12-27PDF 217.4 KB
Test Setup PhotosTest Setup Photos2019-12-27PDF 417.1 KB
Test setup photos SARTest Setup Photos2019-12-27PDF 139.2 KB
Test Report-DSS part 1Test Report2019-12-27PDF 3.1 MB
Test Report-DSS part 2Test Report2019-12-27PDF 5.5 MB
Test Report-DTS 2.4G WIFITest Report2019-12-27PDF 4.4 MB
Test report-NII part 1Test Report2019-12-27PDF 2.4 MB
Test report-NII part 2Test Report2019-12-27PDF 4.1 MB
Declaration Letter of Not Use Channel 12 and 13Cover Letter(s)2019-12-27PDF 48.2 KB
FCC_Agent Authorization LetterCover Letter(s)2019-12-27PDF 24.3 KB
FCC_Letter for Confidentiality RequestCover Letter(s)2019-12-27PDF 85.1 KB
Model Declaration LetterCover Letter(s)2019-12-27PDF 66 KB
UNII Device Declaration LetterCover Letter(s)2019-12-27PDF 29.5 KB
FCC RF Exposure-MPERF Exposure Info2019-12-27PDF 336.9 KB
RF Exposure Info-SAR reportRF Exposure Info2019-12-27PDF 1.9 MB
RF exposure info-SAR reportRF Exposure Info2019-12-27PDF 1.9 MB
SAR Exhibit for the calibration certificateRF Exposure Info2019-12-27PDF 1.5 MB
Block Diagram Metadata onlyBlock DiagramPDF 256.8 KB
Schematic Metadata onlySchematicsPDF 5 MB
Declaration Letter of Software Security Requirements Metadata onlyOperational DescriptionPDF 133.7 KB
Declaration concerning Antenna Specification Metadata onlyOperational DescriptionPDF 75.9 KB
Operation Description Metadata onlyOperational DescriptionPDF 131.9 KB
Tune up Info Metadata onlyParts List/Tune Up InfoPDF 85 KB

Application Information

Application IDOq/JAuKkCCQlzuyJnTLvVw==
Final Action Date2019-12-27
Application PurposeOriginal Equipment
Applicant FRN0029044740
Model80012
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionSnapmaker Modular 3D Printer
Responsible PartyChen Weidong, CTO, whimsycwd@snapmaker.com , 18511870293
AgentIvan Ivan Ivan, Shenzhen Toby Technology Co., Ltd., toby858@tongbiao.com , (86)755-26509301
Test FirmRay Lai, Shenzhen Toby Technology Co., Ltd., toby857@tongbiao.com , ---
TCB Emailjoergkusig@eurofins.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsOutput Power listed is peak conducted. RF exposure compliance for this Snapmaker Modular 3D Printer (Laser Module part) is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
Oq/JAuKkCCQlzuyJnTLvVw==2019-12-27Original Equipment
5hb02typQKedirm0TxYsmg==2019-12-27Original Equipment
3IuY1FaJTxajNpl0zxI2zg==2019-12-27Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.003515CCC
2402-2480 MHz0.002915CCC
2412-2462 MHz0.084715CCC
2422-2452 MHz0.102115CCC
5180-5240 MHz0.071915ECC
5190-5230 MHz0.050715ECC
5745-5825 MHz0.113515ECC
5755-5795 MHz0.117215ECC

Grants

TCB Grant - Application Oq/JAuKkCCQlzuyJnTLvVw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany 		Date of Grant: 12/27/2019

Application Dated: 12/27/2019
Shenzhen Snapmaker Technologies Co., Ltd.
5F, Honglai Kechuang Building 13,
Pingshan 1st Road, Nanshan District,
Shenzhen,
China
 
Attention: Chen Weidong , CTO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AVDG-80012
Name of Grantee:  Shenzhen Snapmaker Technologies Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Snapmaker Modular 3D Printer
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0035  
CC 15C 2402.0  -  2480.0 0.0029  

Output Power listed is peak conducted.

RF exposure compliance for this Snapmaker Modular 3D Printer (Laser Module part) is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons.

End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Oq/JAuKkCCQlzuyJnTLvVw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Shenzhen Snapmaker Technologies Co., Ltd.
5F, Honglai Kechuang Building 13, Pingshan 1st Road, Nanshan District,
Shenzhen,
China 		  Date of Grant: 12/27/2019

Application Dated: 12/27/2019
 
Attention: Chen Weidong , CTO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AVDG-80012
Name of Grantee:  Shenzhen Snapmaker Technologies Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Snapmaker Modular 3D Printer
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0035  
CC 15C 2402.0  -  2480.0 0.0029  

Output Power listed is peak conducted.

RF exposure compliance for this Snapmaker Modular 3D Printer (Laser Module part) is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons.

End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 5hb02typQKedirm0TxYsmg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany 		Date of Grant: 12/27/2019

Application Dated: 12/27/2019
Shenzhen Snapmaker Technologies Co., Ltd.
5F, Honglai Kechuang Building 13,
Pingshan 1st Road, Nanshan District,
Shenzhen,
China
 
Attention: Chen Weidong , CTO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AVDG-80012
Name of Grantee:  Shenzhen Snapmaker Technologies Co., Ltd.
Equipment Class: Digital Transmission System
Notes: Snapmaker Modular 3D Printer
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2412.0  -  2462.0 0.0847  
CC 15C 2422.0  -  2452.0 0.1021  

Output Power listed is peak conducted.

This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode.

For hand use operation, this Snapmaker Modular 3D Printer(Touch Screen part) has been tested with a minimum distance of 0 mm and The highest reported SAR for extremity use conditions is 0.53 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 5hb02typQKedirm0TxYsmg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Shenzhen Snapmaker Technologies Co., Ltd.
5F, Honglai Kechuang Building 13, Pingshan 1st Road, Nanshan District,
Shenzhen,
China 		  Date of Grant: 12/27/2019

Application Dated: 12/27/2019
 
Attention: Chen Weidong , CTO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AVDG-80012
Name of Grantee:  Shenzhen Snapmaker Technologies Co., Ltd.
Equipment Class: Digital Transmission System
Notes: Snapmaker Modular 3D Printer
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2412.0  -  2462.0 0.0847  
CC 15C 2422.0  -  2452.0 0.1021  

Output Power listed is peak conducted.

This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode.

For hand use operation, this Snapmaker Modular 3D Printer(Touch Screen part) has been tested with a minimum distance of 0 mm and The highest reported SAR for extremity use conditions is 0.53 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 3IuY1FaJTxajNpl0zxI2zg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany 		Date of Grant: 12/27/2019

Application Dated: 12/27/2019
Shenzhen Snapmaker Technologies Co., Ltd.
5F, Honglai Kechuang Building 13,
Pingshan 1st Road, Nanshan District,
Shenzhen,
China
 
Attention: Chen Weidong , CTO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AVDG-80012
Name of Grantee:  Shenzhen Snapmaker Technologies Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Snapmaker Modular 3D Printer
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5240.0 0.0719  
CC 15E 5190.0  -  5230.0 0.0507  
CC 15E 5745.0  -  5825.0 0.1135  
CC 15E 5755.0  -  5795.0 0.1172  

Output power listed is average conducted.

This device supports 802.11a, 802.11n with a 20 MHz and 40 MHz bandwidth mode.

For hand use operation, this Snapmaker Modular 3D Printer(Touch Screen part) has been tested with a minimum distance of 0 mm and The highest reported SAR for extremity use conditions is 0.53 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 3IuY1FaJTxajNpl0zxI2zg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Shenzhen Snapmaker Technologies Co., Ltd.
5F, Honglai Kechuang Building 13, Pingshan 1st Road, Nanshan District,
Shenzhen,
China 		  Date of Grant: 12/27/2019

Application Dated: 12/27/2019
 
Attention: Chen Weidong , CTO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AVDG-80012
Name of Grantee:  Shenzhen Snapmaker Technologies Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Snapmaker Modular 3D Printer
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5240.0 0.0719  
CC 15E 5190.0  -  5230.0 0.0507  
CC 15E 5745.0  -  5825.0 0.1135  
CC 15E 5755.0  -  5795.0 0.1172  

Output power listed is average conducted.

This device supports 802.11a, 802.11n with a 20 MHz and 40 MHz bandwidth mode.

For hand use operation, this Snapmaker Modular 3D Printer(Touch Screen part) has been tested with a minimum distance of 0 mm and The highest reported SAR for extremity use conditions is 0.53 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: