FCC ID 2AVDG-J1
3D Printer
by Shenzhen Snapmaker Technologies Co., Ltd.
Grantee Code: 2AVDG Product Code: J1
Latest application date: 2022-07-11
FCC ID Device Details
| FCC ID | 2AVDG-J1 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AVDG |
| Product Code | J1 |
| Applicant Business | Shenzhen Snapmaker Technologies Co., Ltd. 🇨🇳 |
| Related Domains |  snapmaker.com |
| Equipment Class | 3D Printer |
| Test Firm | Shenzhen Accurate Technology Co., Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Original Equipment | 2022-07-11 |
| 5180-5240 MHz | Original Equipment | 2022-07-11 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2022-07-11 | PDF 4.8 MB |
| User manual | Users Manual | 2022-07-11 | PDF 1.1 MB |
| Internal Photos | Internal Photos | 2022-07-11 | PDF 1.9 MB |
| External Photos | External Photos | 2022-07-11 | PDF 2.5 MB |
| ID Label and Label Location | ID Label/Location Info | 2022-07-11 | PDF 488.6 KB |
| Label & Location | ID Label/Location Info | 2022-07-11 | PDF 488.6 KB |
| Test Setup Photos | Test Setup Photos | 2022-07-11 | PDF 1 MB |
| Test Report | Test Report | 2022-07-11 | PDF 2.1 MB |
| Test Report | Test Report | 2022-07-11 | PDF 2.5 MB |
| Attestation Letter | Attestation Statements | 2022-07-11 | PDF 79.3 KB |
| FCC Long Term Confidential Authorization Form | Cover Letter(s) | 2022-07-11 | PDF 81.8 KB |
| POA | Cover Letter(s) | 2022-07-11 | PDF 77.8 KB |
| RF Exposure | RF Exposure Info | 2022-07-11 | PDF 167.4 KB |
| RF Exposure | RF Exposure Info | 2022-07-11 | PDF 165.8 KB |
| Block Diagram Metadata only | Block Diagram | PDF 216.9 KB | |
| Schematics Metadata only | Schematics | PDF 5 MB | |
| Circuit Description Metadata only | Operational Description | PDF 44.5 KB | |
| Operation Description Metadata only | Operational Description | PDF 44.5 KB | |
| U-NII Software Security Description Metadata only | Operational Description | PDF 101.1 KB |
Application Information
| Application ID | m0Ny6iELOJtScnsJ7HDjFA== |
|---|---|
| Final Action Date | 2022-07-11 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0032551707 |
| Model | J1 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 3D Printer |
| Responsible Party | Hazel Li, Certification Engineer, info@snapmaker.com , 0755-26926117 |
| Test Firm | Lisa Zhang, Shenzhen Accurate Technology Co., Ltd., qa@atc-lab.com  , +86-755-26503290 |
| TCB Email | bacl.regulatory@baclcorp.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz and 40 MHz bandwidth modes. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| m0Ny6iELOJtScnsJ7HDjFA== | 2022-07-11 | Original Equipment |
| SydGHOVEnwuO4UjvsPQWJg== | 2022-07-11 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application SydGHOVEnwuO4UjvsPQWJg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 07/11/2022 Application Dated: 07/11/2022 |
| Shenzhen Snapmaker Technologies Co., Ltd. |
| 4F & 5F, Building 13, |
| Pingshan 1st Road, Nanshan District, |
| Shenzhen, Guangdong, China |
| Attention: Hazel Li , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AVDG-J1 |
| Name of Grantee: | Shenzhen Snapmaker Technologies Co., Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 3D Printer |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.016 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.004 |
| Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application SydGHOVEnwuO4UjvsPQWJg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Snapmaker Technologies Co., Ltd. 4F & 5F, Building 13, Pingshan 1st Road, Nanshan District, Shenzhen, Guangdong, China |
Date of Grant: 07/11/2022 Application Dated: 07/11/2022 |
| Attention: Hazel Li , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AVDG-J1 |
| Name of Grantee: | Shenzhen Snapmaker Technologies Co., Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 3D Printer |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.016 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.004 |
| Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 07/11/2022 Application Dated: 07/11/2022 |
| Shenzhen Snapmaker Technologies Co., Ltd. |
| 4F & 5F, Building 13, |
| Pingshan 1st Road, Nanshan District, |
| Shenzhen, Guangdong, China |
| Attention: Hazel Li , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AVDG-J1 |
| Name of Grantee: | Shenzhen Snapmaker Technologies Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | 3D Printer |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.051 |
| Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application m0Ny6iELOJtScnsJ7HDjFA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Snapmaker Technologies Co., Ltd. 4F & 5F, Building 13, Pingshan 1st Road, Nanshan District, Shenzhen, Guangdong, China |
Date of Grant: 07/11/2022 Application Dated: 07/11/2022 |
| Attention: Hazel Li , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AVDG-J1 |
| Name of Grantee: | Shenzhen Snapmaker Technologies Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | 3D Printer |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.051 |
| Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |