FCC ID 2AVDG-SM3PTMC
Snapmaker Modular 3D Printer
by Shenzhen Snapmaker Technologies Co., Ltd.
Grantee Code: 2AVDG Product Code: SM3PTMC
Latest application date: 2022-01-26
FCC ID Device Details
| FCC ID | 2AVDG-SM3PTMC |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AVDG |
| Product Code | SM3PTMC |
| Applicant Business | Shenzhen Snapmaker Technologies Co., Ltd. 🇨🇳 |
| Related Domains |  snapmaker.com |
| Equipment Class | Snapmaker Modular 3D Printer |
| Test Firm | Shenzhen Accurate Technology Co., Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2AVDG-80018XHFW Grant Date: 11/12/2020 | 2022-01-26 |
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2AVDG-80018XHFW Grant Date: 11/12/2020 | 2022-01-26 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2AVDG-80018XHFW Grant Date: 11/12/2020 | 2022-01-26 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Ext Photos | External Photos | 2022-01-26 | PDF 3.4 MB |
| FCC ID Label | ID Label/Location Info | 2022-01-26 | PDF 165.2 KB |
| Change ID Application Letter | Cover Letter(s) | 2022-01-26 | PDF 130.2 KB |
| POA | Cover Letter(s) | 2022-01-26 | PDF 113.3 KB |
| Product Similarity Declaration | Cover Letter(s) | 2022-01-26 | PDF 134.3 KB |
Application Information
| Application ID | sBPKE6f95GATC42pSRqjqA== |
|---|---|
| Final Action Date | 2022-01-26 |
| Application Purpose | Change in identification of presently authorized equipment. Original FCC ID: 2AVDG-80018XHFW Grant Date: 11/12/2020 |
| Applicant FRN | 0029044740 |
| Model | SM3PTMC |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Snapmaker Modular 3D Printer |
| Responsible Party | Chen Weidong, CTO, whimsycwd@snapmaker.com , 18511870293 |
| Test Firm | Lisa Zhang, Shenzhen Accurate Technology Co., Ltd., qa@atc-lab.com  , +86-755-26503290 |
| TCB Email | bacl.regulatory@baclcorp.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| sBPKE6f95GATC42pSRqjqA== | 2022-01-26 | Change in identification of presently authorized equipment. Original FCC ID: 2AVDG-80018XHFW Grant Date: 11/12/2020 |
| YpOe6NKvIYvu61EtqeY9Cw== | 2022-01-26 | Change in identification of presently authorized equipment. Original FCC ID: 2AVDG-80018XHFW Grant Date: 11/12/2020 |
| EbcEbnbZxHjOwQ1lAcjD1g== | 2022-01-26 | Change in identification of presently authorized equipment. Original FCC ID: 2AVDG-80018XHFW Grant Date: 11/12/2020 |
Equipment Authorization
Grants
TCB Grant - Application YpOe6NKvIYvu61EtqeY9Cw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 01/26/2022 Application Dated: 01/25/2022 |
| Shenzhen Snapmaker Technologies Co., Ltd. |
| 5F, Honglai Kechuang Building 13, |
| Pingshan 1st Road, Nanshan District, |
| Shenzhen, China |
| Attention: Chen Weidong , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AVDG-SM3PTMC |
| Name of Grantee: | Shenzhen Snapmaker Technologies Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Snapmaker Modular 3D Printer |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.031 |
| Output power listed is peak conducted. SAR compliance for Face up and extremity (Hand) exposure conditions, this Snapmaker Modular 3D Printer (Touch Screen Part) has been evaluated and documented in this filing. The highest reported SAR for face up, and extremity (Hand) transmission exposure conditions are 0.03 W/kg, and 0.25 W/kg, respectively. This device supports 20 MHz and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application YpOe6NKvIYvu61EtqeY9Cw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Snapmaker Technologies Co., Ltd. 5F, Honglai Kechuang Building 13, Pingshan 1st Road, Nanshan District, Shenzhen, China |
Date of Grant: 01/26/2022 Application Dated: 01/25/2022 |
| Attention: Chen Weidong , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AVDG-SM3PTMC |
| Name of Grantee: | Shenzhen Snapmaker Technologies Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Snapmaker Modular 3D Printer |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.031 |
| Output power listed is peak conducted. SAR compliance for Face up and extremity (Hand) exposure conditions, this Snapmaker Modular 3D Printer (Touch Screen Part) has been evaluated and documented in this filing. The highest reported SAR for face up, and extremity (Hand) transmission exposure conditions are 0.03 W/kg, and 0.25 W/kg, respectively. This device supports 20 MHz and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 01/26/2022 Application Dated: 01/25/2022 |
| Shenzhen Snapmaker Technologies Co., Ltd. |
| 5F, Honglai Kechuang Building 13, |
| Pingshan 1st Road, Nanshan District, |
| Shenzhen, China |
| Attention: Chen Weidong , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AVDG-SM3PTMC |
| Name of Grantee: | Shenzhen Snapmaker Technologies Co., Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Snapmaker Modular 3D Printer |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.001 |
| Output power listed is conducted. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application sBPKE6f95GATC42pSRqjqA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Snapmaker Technologies Co., Ltd. 5F, Honglai Kechuang Building 13, Pingshan 1st Road, Nanshan District, Shenzhen, China |
Date of Grant: 01/26/2022 Application Dated: 01/25/2022 |
| Attention: Chen Weidong , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AVDG-SM3PTMC |
| Name of Grantee: | Shenzhen Snapmaker Technologies Co., Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Snapmaker Modular 3D Printer |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.001 |
| Output power listed is conducted. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 01/26/2022 Application Dated: 01/25/2022 |
| Shenzhen Snapmaker Technologies Co., Ltd. |
| 5F, Honglai Kechuang Building 13, |
| Pingshan 1st Road, Nanshan District, |
| Shenzhen, China |
| Attention: Chen Weidong , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AVDG-SM3PTMC |
| Name of Grantee: | Shenzhen Snapmaker Technologies Co., Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Snapmaker Modular 3D Printer |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.012 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.013 |
| Output power listed is peak conducted. SAR compliance for Face up and extremity (Hand) exposure conditions, this Snapmaker Modular 3D Printer (Touch Screen Part) has been evaluated and documented in this filing. The highest reported SAR for face up, and extremity (Hand) transmission exposure conditions are 0.15 W/kg, and 0.61 W/kg, respectively. This device supports 20 MHz and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application EbcEbnbZxHjOwQ1lAcjD1g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Snapmaker Technologies Co., Ltd. 5F, Honglai Kechuang Building 13, Pingshan 1st Road, Nanshan District, Shenzhen, China |
Date of Grant: 01/26/2022 Application Dated: 01/25/2022 |
| Attention: Chen Weidong , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AVDG-SM3PTMC |
| Name of Grantee: | Shenzhen Snapmaker Technologies Co., Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Snapmaker Modular 3D Printer |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.012 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.013 |
| Output power listed is peak conducted. SAR compliance for Face up and extremity (Hand) exposure conditions, this Snapmaker Modular 3D Printer (Touch Screen Part) has been evaluated and documented in this filing. The highest reported SAR for face up, and extremity (Hand) transmission exposure conditions are 0.15 W/kg, and 0.61 W/kg, respectively. This device supports 20 MHz and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |