FCC ID 2AVED-FRX-M79AU-21

802.11a/b/g/n/ac/ax 1200Mbps WLAN + Bluetooth v5.2 Combo USB3.0 Module

by Shenzhen Feng Ruixiang Intelligent Technology Co., Ltd.

Grantee Code: 2AVED   Product Code: FRXM79AU21
Latest application date: 2022-11-14

FCC ID Device Details

FCC ID2AVED-FRX-M79AU-21
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AVED
Product CodeFRXM79AU21
Applicant BusinessShenzhen Feng Ruixiang Intelligent Technology Co., Ltd. 🇨🇳
Equipment Class802.11a/b/g/n/ac/ax 1200Mbps WLAN + Bluetooth v5.2 Combo USB3.0 Module
Test FirmShenzhen Global Test Service Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2022-11-14
2402-2480 MHzOriginal Equipment2022-11-14
2402-2480 MHzOriginal Equipment2022-11-14

Exhibits

DocumentTypeAvailableFile
U ManualUsers Manual2022-11-14PDF 2.1 MB
User ManualUsers Manual2022-11-14PDF 2.1 MB
Internal PhotosInternal Photos2022-11-14PDF 578.6 KB
Internal photoInternal Photos2022-11-14PDF 578.6 KB
External PhotosExternal Photos2022-11-14PDF 621.6 KB
External photoExternal Photos2022-11-14PDF 621.6 KB
LabelID Label/Location Info2022-11-14PDF 208.4 KB
Label locationID Label/Location Info2022-11-14PDF 208.4 KB
label&label locationID Label/Location Info2022-11-14PDF 208.4 KB
Test Setup PhotosTest Setup Photos2022-11-14PDF 262.8 KB
Test Setup photosTest Setup Photos2022-11-14PDF 262.8 KB
Antenna SpecificationTest Report2022-11-14PDF 587.7 KB
Antenna specificationTest Report2022-11-14PDF 587.7 KB
Test ReportTest Report2022-11-14PDF 4.2 MB
Test ReportTest Report2022-11-14PDF 4.4 MB
Test ReportTest Report2022-11-14PDF 3.4 MB
Agent Authorization Rev 1.0Cover Letter(s)2022-11-14PDF 16.4 KB
AgentAuthorizationRev1.0Cover Letter(s)2022-11-14PDF 16.4 KB
FCC Modular Approval JustificationCover Letter(s)2022-11-14PDF 69.1 KB
FCC Modular Approval Request Rev 3.0_rev1Cover Letter(s)2022-11-14PDF 69.1 KB
FCC Short_Long Term Confidentiality Request Rev4.1Cover Letter(s)2022-11-14PDF 63.5 KB
FCC Software Configuration Control Declaration Rev1.1Cover Letter(s)2022-11-14PDF 58.4 KB
Long_Term_ConfidentialityCover Letter(s)2022-11-14PDF 63.5 KB
RFexposureRF Exposure Info2022-11-14PDF 713.2 KB
Block Metadata onlyBlock DiagramPDF 238.7 KB
BlockDiagram Metadata onlyBlock DiagramPDF 238.7 KB
SCH Metadata onlySchematicsPDF 229.8 KB
OP Metadata onlyOperational DescriptionPDF 326.9 KB
SOFTWARESECURITYREQUIREMENTSFORU-NIIDEVICES Metadata onlySDR Software/Security InfPDF 203.3 KB

Application Information

Application IDsUSFcg1PsIYGT4OKGOyG6A==
Final Action Date2022-11-14
Application PurposeOriginal Equipment
Applicant FRN0029053485
ModelFRX-M79AU-21
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device Description802.11a/b/g/n/ac/ax 1200Mbps WLAN + Bluetooth v5.2 Combo USB3.0 Module
Responsible PartyHaiyun Peng, sales director, J31228@126.com , 13662644686
Technical ContactShenzhen Feng RuiXiang Intelligent Technology Co.,, J31228@126.com
Test FirmSimon Hu, Shenzhen Global Test Service Co., Ltd., huxiaolong@gtscert.com , 86-137-286-828-40
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsLimited Single Modular Approval. Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.

Applications

Application IDDatePurpose
sUSFcg1PsIYGT4OKGOyG6A==2022-11-14Original Equipment
p5ZtbBhJoFPTRBxUukcVmQ==2022-11-14Original Equipment
W+ls4ZCIJ4+ejtGxXYBMGg==2022-11-14Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.007515CCC
2402-2480 MHz0.008500015CCC
2412-2462 MHz0.296515CCC, MO
5180-5240 MHz0.049915ECC, MO
5745-5825 MHz0.020515ECC, MO

Grants

TCB Grant - Application W+ls4ZCIJ4+ejtGxXYBMGg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 11/14/2022

Application Dated: 11/14/2022
Shenzhen Feng Ruixiang Intelligent Technology Co., Ltd.
302, Building 6, no.4 Zhongxing road,Zhangge
community, Fucheng street,Longhua district,
Shenzhen Guangdong,P.R., 518000
China
 
Attention: Haiyun Peng , sales director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AVED-FRX-M79AU-21
Name of Grantee:  Shenzhen Feng Ruixiang Intelligent Technology Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 802.11a/b/g/n/ac/ax 1200Mbps WLAN + Bluetooth v5.2 Combo USB3.0 Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0085  

Limited Single Modular Approval. Output power listed is conducted power.The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application W+ls4ZCIJ4+ejtGxXYBMGg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shenzhen Feng Ruixiang Intelligent Technology Co., Ltd.
302, Building 6, no.4 Zhongxing road,Zhangge community, Fucheng street,Longhua district,
Shenzhen Guangdong,P.R., 518000
China
  Date of Grant: 11/14/2022

Application Dated: 11/14/2022
 
Attention: Haiyun Peng , sales director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AVED-FRX-M79AU-21
Name of Grantee:  Shenzhen Feng Ruixiang Intelligent Technology Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 802.11a/b/g/n/ac/ax 1200Mbps WLAN + Bluetooth v5.2 Combo USB3.0 Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0085  

Limited Single Modular Approval. Output power listed is conducted power.The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application sUSFcg1PsIYGT4OKGOyG6A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 11/14/2022

Application Dated: 11/14/2022
Shenzhen Feng Ruixiang Intelligent Technology Co., Ltd.
302, Building 6, no.4 Zhongxing road,Zhangge
community, Fucheng street,Longhua district,
Shenzhen Guangdong,P.R., 518000
China
 
Attention: Haiyun Peng , sales director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AVED-FRX-M79AU-21
Name of Grantee:  Shenzhen Feng Ruixiang Intelligent Technology Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a/b/g/n/ac/ax 1200Mbps WLAN + Bluetooth v5.2 Combo USB3.0 Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0499  
CC MO 15E 5745.0  -  5825.0 0.0205  

Limited Single Modular Approval. Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application sUSFcg1PsIYGT4OKGOyG6A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shenzhen Feng Ruixiang Intelligent Technology Co., Ltd.
302, Building 6, no.4 Zhongxing road,Zhangge community, Fucheng street,Longhua district,
Shenzhen Guangdong,P.R., 518000
China
  Date of Grant: 11/14/2022

Application Dated: 11/14/2022
 
Attention: Haiyun Peng , sales director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AVED-FRX-M79AU-21
Name of Grantee:  Shenzhen Feng Ruixiang Intelligent Technology Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11a/b/g/n/ac/ax 1200Mbps WLAN + Bluetooth v5.2 Combo USB3.0 Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0499  
CC MO 15E 5745.0  -  5825.0 0.0205  

Limited Single Modular Approval. Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application p5ZtbBhJoFPTRBxUukcVmQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 11/14/2022

Application Dated: 11/14/2022
Shenzhen Feng Ruixiang Intelligent Technology Co., Ltd.
302, Building 6, no.4 Zhongxing road,Zhangge
community, Fucheng street,Longhua district,
Shenzhen Guangdong,P.R., 518000
China
 
Attention: Haiyun Peng , sales director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AVED-FRX-M79AU-21
Name of Grantee:  Shenzhen Feng Ruixiang Intelligent Technology Co., Ltd.
Equipment Class: Digital Transmission System
Notes: 802.11a/b/g/n/ac/ax 1200Mbps WLAN + Bluetooth v5.2 Combo USB3.0 Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0075  
CC MO 15C 2412.0  -  2462.0 0.2965  

Limited Single Modular Approval. Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application p5ZtbBhJoFPTRBxUukcVmQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shenzhen Feng Ruixiang Intelligent Technology Co., Ltd.
302, Building 6, no.4 Zhongxing road,Zhangge community, Fucheng street,Longhua district,
Shenzhen Guangdong,P.R., 518000
China
  Date of Grant: 11/14/2022

Application Dated: 11/14/2022
 
Attention: Haiyun Peng , sales director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AVED-FRX-M79AU-21
Name of Grantee:  Shenzhen Feng Ruixiang Intelligent Technology Co., Ltd.
Equipment Class: Digital Transmission System
Notes: 802.11a/b/g/n/ac/ax 1200Mbps WLAN + Bluetooth v5.2 Combo USB3.0 Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0075  
CC MO 15C 2412.0  -  2462.0 0.2965  

Limited Single Modular Approval. Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: