FCC ID 2AVED-FRXWIFI7988AP
802.11ax 1201Mbps WLAN + BT5.2 USB2.0 Combo Module
by Shenzhen Feng Rui Xiang Intelligent Technology Co., Ltd.
Grantee Code: 2AVED Product Code: FRXWIFI7988AP
Latest application date: 2025-03-03
FCC ID Device Details
| FCC ID | 2AVED-FRXWIFI7988AP |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AVED |
| Product Code | FRXWIFI7988AP |
| Applicant Business | Shenzhen Feng Rui Xiang Intelligent Technology Co., Ltd. 🇨🇳 |
| Equipment Class | 802.11ax 1201Mbps WLAN + BT5.2 USB2.0 Combo Module |
| Test Firm | SHENZHEN GLOBAL TEST SERVICE CO., LTD. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2025-03-03 |
| 5180-5240 MHz | Original Equipment | 2025-03-03 |
| 2412-2462 MHz | Original Equipment | 2025-03-03 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User manual | Users Manual | 2025-03-03 | PDF 2.6 MB |
| Internal photos | Internal Photos | 2025-03-03 | PDF 224 KB |
| External photos | External Photos | 2025-03-03 | PDF 308.6 KB |
| Label and label location | ID Label/Location Info | 2025-03-03 | PDF 78.6 KB |
| Test setup photos | Test Setup Photos | 2025-03-03 | PDF 337.1 KB |
| Antenna information BT | Test Report | 2025-03-03 | PDF 1.1 MB |
| Antenna information WLAN | Test Report | 2025-03-03 | PDF 470.3 KB |
| Appendix A test data BT | Test Report | 2025-03-03 | PDF 4.4 MB |
| Appendix B test data BT LE | Test Report | 2025-03-03 | PDF 2.2 MB |
| Appendix C test data 2G4WLAN_antenna 0 part 1 | Test Report | 2025-03-03 | PDF 2.9 MB |
| Appendix C test data 2G4WLAN_antenna 0 part 2 | Test Report | 2025-03-03 | PDF 3.4 MB |
| Appendix C test data 2G4WLAN_antenna 1 part 1 | Test Report | 2025-03-03 | PDF 2.9 MB |
| Appendix C test data 2G4WLAN_antenna 1 part 2 | Test Report | 2025-03-03 | PDF 3.4 MB |
| Appendix D test data 5GWLAN band 1_antenna 0 part 1 | Test Report | 2025-03-03 | PDF 3.1 MB |
| Appendix D test data 5GWLAN band 1_antenna 0 part 2 | Test Report | 2025-03-03 | PDF 3.8 MB |
| Appendix D test data 5GWLAN band 1_antenna 1 part 1 | Test Report | 2025-03-03 | PDF 3.1 MB |
| Appendix D test data 5GWLAN band 1_antenna 1 part 2 | Test Report | 2025-03-03 | PDF 3.8 MB |
| Appendix E test data 5GWLAN band 3_antenna 0 part 1 | Test Report | 2025-03-03 | PDF 3.1 MB |
| Appendix E test data 5GWLAN band 3_antenna 0 part 2 | Test Report | 2025-03-03 | PDF 3.9 MB |
| Appendix E test data 5GWLAN band 3_antenna 1 part 1 | Test Report | 2025-03-03 | PDF 3.1 MB |
| Appendix E test data 5GWLAN band 3_antenna 1 part 2 | Test Report | 2025-03-03 | PDF 4 MB |
| Test Report 2G4WLAN | Test Report | 2025-03-03 | PDF 1 MB |
| Test Report 5GWLAN | Test Report | 2025-03-03 | PDF 1.1 MB |
| Test Report BT | Test Report | 2025-03-03 | PDF 1.6 MB |
| Test Report BT LE | Test Report | 2025-03-03 | PDF 947.8 KB |
| Agent attetsation letter | Attestation Statements | 2025-03-03 | PDF 381.3 KB |
| Covered equipment letter | Attestation Statements | 2025-03-03 | PDF 189.4 KB |
| Confidentiality request letter | Cover Letter(s) | 2025-03-03 | PDF 175.2 KB |
| Letter of declaration disable channel 12 and 13 by software | Cover Letter(s) | 2025-03-03 | PDF 140.3 KB |
| Modular approval request letter | Cover Letter(s) | 2025-03-03 | PDF 242 KB |
| RF exposure evaluation | RF Exposure Info | 2025-03-03 | PDF 415.3 KB |
| Block diagram Metadata only | Block Diagram | PDF 187.3 KB | |
| Schematic Metadata only | Schematics | PDF 355.2 KB | |
| Letter of declaration unii device Metadata only | Operational Description | PDF 265.4 KB | |
| Letter of declaration unii device software configuration control Metadata only | Operational Description | PDF 83.4 KB | |
| Letter of declaration unii device software security requirements Metadata only | Operational Description | PDF 164.3 KB | |
| Operation description Metadata only | Operational Description | PDF 734.7 KB |
Application Information
| Application ID | cwRyIn/Szxv87NMXNPFNiA== |
|---|---|
| Final Action Date | 2025-03-03 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0029053485 |
| Model | FRXWIFI7988AP |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | 802.11ax 1201Mbps WLAN + BT5.2 USB2.0 Combo Module |
| Responsible Party | Haiyun Peng, sales director, J31228@126.com  , 13662644686 |
| Test Firm | Simon Hu, SHENZHEN GLOBAL TEST SERVICE CO., LTD., huxiaolong@gtscert.com  , +86 13728682840 |
| TCB Email | o.kneip@kl-certification.de  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is maximum peak conducted output power. Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The device also contains 2.4GHz WLAN, 5GHz WLAN and BLE transmitters. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| cwRyIn/Szxv87NMXNPFNiA== | 2025-03-03 | Original Equipment |
| MK5NdWN9R9oO3t+bbu8p1Q== | 2025-03-03 | Original Equipment |
| 3gF9ZDYlzVWv0+qSyVderA== | 2025-03-03 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application MK5NdWN9R9oO3t+bbu8p1Q==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
KL-Certification GmbH Heinrich-Hertz-Allee 7 St. Ingbert, 66386 Germany |
Date of Grant: 03/03/2025 Application Dated: 03/03/2025 |
| Shenzhen Feng Rui Xiang Intelligent Technology Co., Ltd. |
| 2108 Longhu Junhui, No. 4745 Longhua Avenue, |
| Qinghua Community, Longhua Street, |
| Longhua District, Shenzhen, 518000 China |
| Attention: Haiyun Peng , sales director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AVED-FRXWIFI7988AP |
| Name of Grantee: | Shenzhen Feng Rui Xiang Intelligent Technology Co., Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11ax 1201Mbps WLAN + BT5.2 USB2.0 Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.0207 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.0467 |
| Power listed is maximum average conducted output power. Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. This device supports 20 MHz, 40 MHz and 80 MHz bandwidth modes as described in this filing. Device is a client only device and a 2 x 2 Spatial Multiplexing MIMO configuration as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The device also contains 2.4GHz WLAN, Bluetooth and BLE transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
TCB Grant - Application cwRyIn/Szxv87NMXNPFNiA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
KL-Certification GmbH Heinrich-Hertz-Allee 7 St. Ingbert, 66386 Germany |
Date of Grant: 03/03/2025 Application Dated: 03/03/2025 |
| Shenzhen Feng Rui Xiang Intelligent Technology Co., Ltd. |
| 2108 Longhu Junhui, No. 4745 Longhua Avenue, |
| Qinghua Community, Longhua Street, |
| Longhua District, Shenzhen, 518000 China |
| Attention: Haiyun Peng , sales director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AVED-FRXWIFI7988AP |
| Name of Grantee: | Shenzhen Feng Rui Xiang Intelligent Technology Co., Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11ax 1201Mbps WLAN + BT5.2 USB2.0 Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0045 |
| Power listed is maximum peak conducted output power. Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The device also contains 2.4GHz WLAN, 5GHz WLAN and BLE transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application 3gF9ZDYlzVWv0+qSyVderA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
KL-Certification GmbH Heinrich-Hertz-Allee 7 St. Ingbert, 66386 Germany |
Date of Grant: 03/03/2025 Application Dated: 03/03/2025 |
| Shenzhen Feng Rui Xiang Intelligent Technology Co., Ltd. |
| 2108 Longhu Junhui, No. 4745 Longhua Avenue, |
| Qinghua Community, Longhua Street, |
| Longhua District, Shenzhen, 518000 China |
| Attention: Haiyun Peng , sales director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AVED-FRXWIFI7988AP |
| Name of Grantee: | Shenzhen Feng Rui Xiang Intelligent Technology Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11ax 1201Mbps WLAN + BT5.2 USB2.0 Combo Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0033 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.3524 |
| Power listed is maximum peak conducted output power. Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. This device supports both 20 MHz and 40 MHz bandwidth modes as described in this filing. Device is a client only device and a 2 x 2 Spatial Multiplexing MIMO configuration as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The device also contains 5GHz WLAN and Bluetooth transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |