FCC ID 2AVEDBL-M2268BU1-B

IEEE 802.11a/b/g/n/ac 867Mbps WLAN + Bluetooth 5.0 USB2.0 Module

by Shenzhen Feng Ruixiang Intelligent Technology Co., Ltd.

Grantee Code: 2AVED   Product Code: BLM2268BU1B
Latest application date: 2020-12-30

FCC ID Device Details

FCC ID2AVEDBL-M2268BU1-B
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AVED
Product CodeBLM2268BU1B
Applicant BusinessShenzhen Feng Ruixiang Intelligent Technology Co., Ltd. 🇨🇳
Equipment ClassIEEE 802.11a/b/g/n/ac 867Mbps WLAN + Bluetooth 5.0 USB2.0 Module
Test FirmShenzhen Global Test Service Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2020-12-30
5180-5240 MHzOriginal Equipment2020-12-30
2402-2480 MHzOriginal Equipment2020-12-30

Exhibits

DocumentTypeAvailableFile
User-ManualUsers Manual2020-12-30PDF 684.2 KB
Int_PhotosInternal Photos2020-12-30PDF 997.8 KB
Internal PhotosInternal Photos2020-12-30PDF 997.8 KB
Internal_photosInternal Photos2020-12-30PDF 997.8 KB
EXT_PHOTOExternal Photos2020-12-30PDF 997.8 KB
Ext_PhotosExternal Photos2020-12-30PDF 997.8 KB
External_PhotosExternal Photos2020-12-30PDF 997.8 KB
Label_and_Label_LocationID Label/Location Info2020-12-30PDF 259.1 KB
Label_and_locationID Label/Location Info2020-12-30PDF 259.1 KB
Test_Setup_PhotosTest Setup Photos2020-12-30PDF 239.8 KB
GTS20201203009-2-10-WLANTest Report2020-12-30PDF 3.9 MB
GTS20201203009-2-11-15.407-1Test Report2020-12-30PDF 4.3 MB
GTS20201203009-2-11-15.407-2Test Report2020-12-30PDF 4.6 MB
GTS20201203009-2-11-15.407-3Test Report2020-12-30PDF 3.5 MB
GTS20201203009-2-8-BTTest Report2020-12-30PDF 4.9 MB
GTS20201203009-2-9-BLETest Report2020-12-30PDF 1.4 MB
Agent_AuthorizationCover Letter(s)2020-12-30PDF 16.6 KB
Agent_Authorization_Rev_1.0Cover Letter(s)2020-12-30PDF 16.6 KB
FCC Modular Approval Request Rev 3.0Cover Letter(s)2020-12-30PDF 167.8 KB
FCC Software Configuration Control Declaration Rev1.1Cover Letter(s)2020-12-30PDF 57.3 KB
FCC_Long_Term_Confidentiality_Request_Rev4.1Cover Letter(s)2020-12-30PDF 161.1 KB
FCC_Short_&_Long_Term_Confidentiality_RequestCover Letter(s)2020-12-30PDF 161.1 KB
WIFI Channel 12 and 13 Declaration LetterCover Letter(s)2020-12-30PDF 124.4 KB
GTS20201203009-2-12-RF Exposure MPERF Exposure Info2020-12-30PDF 720.5 KB
Block Diagram Metadata onlyBlock DiagramPDF 47.1 KB
block_diagram Metadata onlyBlock DiagramPDF 47.1 KB
SCH Metadata onlySchematicsPDF 190.4 KB
Schematic Metadata onlySchematicsPDF 190.4 KB
Operation_Description Metadata onlyOperational DescriptionPDF 299.5 KB
Operational_Description Metadata onlyOperational DescriptionPDF 299.5 KB
FCC Software Security Requirements for UNII devices Rev 2.1 Metadata onlySDR Software/Security InfPDF 191.6 KB

Application Information

Application IDuJOHImIh/i348Fadx27CZA==
Final Action Date2020-12-30
Application PurposeOriginal Equipment
Applicant FRN0029053485
ModelBL-M2268BU1-B
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionIEEE 802.11a/b/g/n/ac 867Mbps WLAN + Bluetooth 5.0 USB2.0 Module
Responsible PartyHaiyun Peng, sales director, J31228@126.com , 13662644686
Technical ContactShenzhen Feng Ruixiang Intelligent Technology Co.,, J31228@126.com
Test FirmJunwen Liu, Shenzhen Global Test Service Co., Ltd., liujunwen@gtscert.com , 0755-28717088-868
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Modular Approval. Output power listed is conducted power. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
uJOHImIh/i348Fadx27CZA==2020-12-30Original Equipment
cJvEiiLJsrMWDIJJdPICzA==2020-12-30Original Equipment
IdXV8gymUB0eFNpG1VFm3A==2020-12-30Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.007715CCC
2402-2480 MHz0.004000015CCC
2412-2462 MHz0.096815CCC, MO
5180-5240 MHz0.06115E38, CC, MO
5745-5825 MHz0.06115E38, CC, MO

Grants

TCB Grant - Application uJOHImIh/i348Fadx27CZA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 12/30/2020

Application Dated: 12/30/2020
Shenzhen Feng Ruixiang Intelligent Technology Co., Ltd.
302, Building 6, no.4 Zhongxing road,Zhangge
community, Fucheng street,Longhua district,
Shenzhen Guangdong,P.R., 518000
China
 
Attention: Haiyun Peng , sales director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AVEDBL-M2268BU1-B
Name of Grantee:  Shenzhen Feng Ruixiang Intelligent Technology Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: IEEE 802.11a/b/g/n/ac 867Mbps WLAN + Bluetooth 5.0 USB2.0 Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.004  

Single Modular Approval. Output power listed is conducted power. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application uJOHImIh/i348Fadx27CZA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shenzhen Feng Ruixiang Intelligent Technology Co., Ltd.
302, Building 6, no.4 Zhongxing road,Zhangge community, Fucheng street,Longhua district,
Shenzhen Guangdong,P.R., 518000
China
  Date of Grant: 12/30/2020

Application Dated: 12/30/2020
 
Attention: Haiyun Peng , sales director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AVEDBL-M2268BU1-B
Name of Grantee:  Shenzhen Feng Ruixiang Intelligent Technology Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: IEEE 802.11a/b/g/n/ac 867Mbps WLAN + Bluetooth 5.0 USB2.0 Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.004  

Single Modular Approval. Output power listed is conducted power. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application IdXV8gymUB0eFNpG1VFm3A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 12/30/2020

Application Dated: 12/30/2020
Shenzhen Feng Ruixiang Intelligent Technology Co., Ltd.
302, Building 6, no.4 Zhongxing road,Zhangge
community, Fucheng street,Longhua district,
Shenzhen Guangdong,P.R., 518000
China
 
Attention: Haiyun Peng , sales director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AVEDBL-M2268BU1-B
Name of Grantee:  Shenzhen Feng Ruixiang Intelligent Technology Co., Ltd.
Equipment Class: Digital Transmission System
Notes: IEEE 802.11a/b/g/n/ac 867Mbps WLAN + Bluetooth 5.0 USB2.0 Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0077  
CC MO 15C 2412.0  -  2462.0 0.0968  

Single Modular Approval. Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application IdXV8gymUB0eFNpG1VFm3A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shenzhen Feng Ruixiang Intelligent Technology Co., Ltd.
302, Building 6, no.4 Zhongxing road,Zhangge community, Fucheng street,Longhua district,
Shenzhen Guangdong,P.R., 518000
China
  Date of Grant: 12/30/2020

Application Dated: 12/30/2020
 
Attention: Haiyun Peng , sales director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AVEDBL-M2268BU1-B
Name of Grantee:  Shenzhen Feng Ruixiang Intelligent Technology Co., Ltd.
Equipment Class: Digital Transmission System
Notes: IEEE 802.11a/b/g/n/ac 867Mbps WLAN + Bluetooth 5.0 USB2.0 Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0077  
CC MO 15C 2412.0  -  2462.0 0.0968  

Single Modular Approval. Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application cJvEiiLJsrMWDIJJdPICzA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 12/30/2020

Application Dated: 12/30/2020
Shenzhen Feng Ruixiang Intelligent Technology Co., Ltd.
302, Building 6, no.4 Zhongxing road,Zhangge
community, Fucheng street,Longhua district,
Shenzhen Guangdong,P.R., 518000
China
 
Attention: Haiyun Peng , sales director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AVEDBL-M2268BU1-B
Name of Grantee:  Shenzhen Feng Ruixiang Intelligent Technology Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE 802.11a/b/g/n/ac 867Mbps WLAN + Bluetooth 5.0 USB2.0 Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.061  
38 CC MO 15E 5745.0  -  5825.0 0.061  

Single Modular Approval. Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application cJvEiiLJsrMWDIJJdPICzA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shenzhen Feng Ruixiang Intelligent Technology Co., Ltd.
302, Building 6, no.4 Zhongxing road,Zhangge community, Fucheng street,Longhua district,
Shenzhen Guangdong,P.R., 518000
China
  Date of Grant: 12/30/2020

Application Dated: 12/30/2020
 
Attention: Haiyun Peng , sales director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AVEDBL-M2268BU1-B
Name of Grantee:  Shenzhen Feng Ruixiang Intelligent Technology Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IEEE 802.11a/b/g/n/ac 867Mbps WLAN + Bluetooth 5.0 USB2.0 Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.061  
38 CC MO 15E 5745.0  -  5825.0 0.061  

Single Modular Approval. Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: