FCC ID 2AVEDFRX-M8822CU5

802.11ac 867Mbps WLAN + BT v5.0 USB2.0 Module Specification

by Shenzhen Feng Rui Xiang Intelligent Technology Co., Ltd.

Grantee Code: 2AVED   Product Code: FRXM8822CU5
Latest application date: 2026-04-28

FCC ID Device Details

FCC ID2AVEDFRX-M8822CU5
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AVED
Product CodeFRXM8822CU5
Applicant BusinessShenzhen Feng Rui Xiang Intelligent Technology Co., Ltd. 🇨🇳
Related Domains fccusagent.com
Equipment Class802.11ac 867Mbps WLAN + BT v5.0 USB2.0 Module Specification
Test FirmSHENZHEN GLOBAL TEST SERVICE CO LTD

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5745-5825 MHzOriginal Equipment2026-04-28
2412-2462 MHzOriginal Equipment2026-04-28
2402-2480 MHzOriginal Equipment2026-04-28

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2026-04-28PDF 1.2 MB
Internal photosInternal Photos2026-04-28PDF 666.7 KB
External photosExternal Photos2026-04-28PDF 439.5 KB
Label and LocationID Label/Location Info2026-04-28PDF 312 KB
Test Setup PhotosTest Setup Photos2026-04-28PDF 1.4 MB
Antenna SpecificationTest Report2026-04-28PDF 556.8 KB
BLETest Report2026-04-28PDF 706.6 KB
BTTest Report2026-04-28PDF 2.5 MB
Test reportTest Report2026-04-28PDF 853 KB
Test-Data-for-BLETest Report2026-04-28PDF 3.3 MB
Test-Data-for-BTTest Report2026-04-28PDF 2.4 MB
Test-Data-for-RLAN-5-2 ANT1Test Report2026-04-28PDF 2.7 MB
Test-Data-for-RLAN-5-2 ANT2Test Report2026-04-28PDF 2.7 MB
Test-Data-for-RLAN-5-8 ANT1Test Report2026-04-28PDF 2.7 MB
Test-Data-for-RLAN-5-8 ANT2Test Report2026-04-28PDF 2.7 MB
Test-Data-for-WLAN1-ANT1Test Report2026-04-28PDF 2.5 MB
Test-Data-for-WLAN1-ANT2Test Report2026-04-28PDF 2.5 MB
WLANTest Report2026-04-28PDF 749.3 KB
2.911 (d)(5)(i)CertificationEquipmentTypev1.2Attestation Statements2026-04-28PDF 115.4 KB
2.911 (d)(5)(ii)CertificationApplicantv1.3Attestation Statements2026-04-28PDF 227 KB
2.911 (d)(7)USAgentforServiceofProcessv1.3Attestation Statements2026-04-28PDF 120.7 KB
Agent Authorization Rev1.0Cover Letter(s)2026-04-28PDF 65.3 KB
FCC Modular Approval RequestCover Letter(s)2026-04-28PDF 104.8 KB
FCC Short & Long Term Confidentiality Request Rev4.1Cover Letter(s)2026-04-28PDF 110.8 KB
FCC-Software-Configuration-Control-DeclarationCover Letter(s)2026-04-28PDF 170 KB
RF ExposureRF Exposure Info2026-04-28PDF 381.4 KB
Block Diagram Metadata onlyBlock DiagramPDF 206.1 KB
SCH Metadata onlySchematicsPDF 197.6 KB
OP Metadata onlyOperational DescriptionPDF 183.7 KB
FCC-Software-Security-Requirements-for-UNII-devices Metadata onlySDR Software/Security Info.PDF 85.8 KB

Application Information

Application IDSWLGdi+9VobYrRJ//MjTNQ==
Final Action Date2026-04-28
Application PurposeOriginal Equipment
Applicant FRN0029053485
ModelFRX-M8822CU5
Frequency Range5745-5825 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device Description802.11ac 867Mbps WLAN + BT v5.0 USB2.0 Module Specification
Responsible PartyHaiyun Peng, J31228@126.com , 13662644686
Technical ContactShenzhen Feng Rui Xiang Intelligent Technology, J31228@126.com
Non-Technical ContactTim Payne, FCC US Agent, LLC, Support@FCCUSAgent.com , 7085713148
Test FirmOlive Nie, SHENZHEN GLOBAL TEST SERVICE CO LTD, niezhigang@gtscert.com , +86 13266549672
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo

Applications

Application IDDatePurpose
SWLGdi+9VobYrRJ//MjTNQ==2026-04-28Original Equipment
9deph2PV9rbCe2og9plD+g==2026-04-28Original Equipment
2Lmx2NWDnxolxPI9A9vftw==2026-04-28Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
5180-5240 MHz0.037515ECC MO
5745-5825 MHz0.053315ECC MO
2402-2480 MHz0.010915CCC
2412-2462 MHz0.095715CCC MO
2402-2480 MHz0.012215CCC

Grants

TCB Grant - Application SWLGdi+9VobYrRJ//MjTNQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 04/28/2026

Application Dated: 04/28/2026
Shenzhen Feng Rui Xiang Intelligent Technology Co., Ltd.
2108 Longhu Junhui, No. 4745 Longhua Avenue,
Qinghua Community, Longhua Street,
Longhua District, Shenzhen, 518000
China
 
Attention: Haiyun Peng , sales director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AVEDFRX-M8822CU5
Name of Grantee:  Shenzhen Feng Rui Xiang Intelligent Technology Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11ac 867Mbps WLAN + BT v5.0 USB2.0 Module Specification
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0375  
CC MO 15E 5745.0  -  5825.0 0.0533  

Single Modular Approval. Output power listed is the maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 9deph2PV9rbCe2og9plD+g==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 04/28/2026

Application Dated: 04/28/2026
Shenzhen Feng Rui Xiang Intelligent Technology Co., Ltd.
2108 Longhu Junhui, No. 4745 Longhua Avenue,
Qinghua Community, Longhua Street,
Longhua District, Shenzhen, 518000
China
 
Attention: Haiyun Peng , sales director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AVEDFRX-M8822CU5
Name of Grantee:  Shenzhen Feng Rui Xiang Intelligent Technology Co., Ltd.
Equipment Class: Digital Transmission System
Notes: 802.11ac 867Mbps WLAN + BT v5.0 USB2.0 Module Specification
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0109  
CC MO 15C 2412.0  -  2462.0 0.0957  

Single Modular Approval. Power listed is the maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 2Lmx2NWDnxolxPI9A9vftw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 04/28/2026

Application Dated: 04/28/2026
Shenzhen Feng Rui Xiang Intelligent Technology Co., Ltd.
2108 Longhu Junhui, No. 4745 Longhua Avenue,
Qinghua Community, Longhua Street,
Longhua District, Shenzhen, 518000
China
 
Attention: Haiyun Peng , sales director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AVEDFRX-M8822CU5
Name of Grantee:  Shenzhen Feng Rui Xiang Intelligent Technology Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 802.11ac 867Mbps WLAN + BT v5.0 USB2.0 Module Specification
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0122  

Single Modular Approval. Power listed is the maximum conducted output power. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.

CC: This device is certified pursuant to two different Part 15 rules sections.