FCC ID 2AVIC-IP530

IP Phone

by Telepower Communication Co., LTD

Grantee Code: 2AVIC   Product Code: IP530
Latest application date: 2020-01-03

FCC ID Device Details

FCC ID2AVIC-IP530
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AVIC
Product CodeIP530
Applicant BusinessTelepower Communication Co., LTD 🇨🇳
Related Domains telpo.com
Equipment ClassIP Phone
Test FirmShenzhen HUAK Testing Technology Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5745-5825 MHzOriginal Equipment2020-01-03
2412-2462 MHzOriginal Equipment2020-01-03

Exhibits

DocumentTypeAvailableFile
User manualUsers Manual2020-01-03PDF 1.4 MB
Int photoInternal Photos2020-01-03PDF 2.9 MB
internal photoInternal Photos2020-01-03PDF 2.9 MB
Ext photoExternal Photos2020-01-03PDF 3.2 MB
external photoExternal Photos2020-01-03PDF 3.2 MB
labelID Label/Location Info2020-01-03PDF 514.7 KB
Test photoTest Setup Photos2020-01-03PDF 216.1 KB
test setup photoTest Setup Photos2020-01-03PDF 216.1 KB
test reportTest Report2020-01-03PDF 2.3 MB
test reportTest Report2020-01-03PDF 3.5 MB
Agent_AuthorizationCover Letter(s)2020-01-03PDF 25.2 KB
FCC Software Configuration Control Declaration Rev1.0Cover Letter(s)2020-01-03PDF 879.3 KB
FCC long Term ConfidentialityCover Letter(s)2020-01-03PDF 102.7 KB
FCC_Long_Term_Confidentiality_RequestCover Letter(s)2020-01-03PDF 24 KB
FCC_Short_Long_Term_Confidentiality_RequestCover Letter(s)2020-01-03PDF 24 KB
MPE reportRF Exposure Info2020-01-03PDF 91.7 KB
Block Metadata onlyBlock DiagramPDF 486.3 KB
SCH Metadata onlySchematicsPDF 2.1 MB
OP Metadata onlyOperational DescriptionPDF 106.9 KB
SOFTWARE SECURITY DESCRIPTION Metadata onlySDR Software/Security InfPDF 569.3 KB

Application Information

Application IDKGn/A8XWFKZ5n2S5mtwHbg==
Final Action Date2020-01-03
Application PurposeOriginal Equipment
Applicant FRN0029080967
ModelIP530
Frequency Range5745-5825 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionIP Phone
Responsible PartyBryan Loo, bryan@telpo.com , +86-13415466506
Technical ContactTelepower Communication Co., LTD, bryan@telpo.com
Test FirmJason Zhou, Shenzhen HUAK Testing Technology Co., Ltd., jason@cer-mark.com , +86-755-23029901
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is the maximum conducted output power. This device contains 20, 40 and 80 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
KGn/A8XWFKZ5n2S5mtwHbg==2020-01-03Original Equipment
3sfb9itifSGXYP/8R5IEvg==2020-01-03Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.014060015CCC
5745-5825 MHz0.012530015E38, CC

Grants

TCB Grant - Application KGn/A8XWFKZ5n2S5mtwHbg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 01/03/2020

Application Dated: 01/03/2020
Telepower Communication Co., LTD
201, 203, 502, 504, Building 5, Zone A,
Hantian Technology Town, Guiping Road
Nanhai District, Foshan City, Guangdong Province,
China
 
Attention: Bryan Loo

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AVIC-IP530
Name of Grantee:  Telepower Communication Co., LTD
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IP Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5745.0  -  5825.0 0.01253  

Power listed is the maximum conducted output power. This device contains 20, 40 and 80 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application KGn/A8XWFKZ5n2S5mtwHbg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Telepower Communication Co., LTD
201, 203, 502, 504, Building 5, Zone A, Hantian Technology Town, Guiping Road
Nanhai District, Foshan City, Guangdong Province,
China
  Date of Grant: 01/03/2020

Application Dated: 01/03/2020
 
Attention: Bryan Loo

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AVIC-IP530
Name of Grantee:  Telepower Communication Co., LTD
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IP Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5745.0  -  5825.0 0.01253  

Power listed is the maximum conducted output power. This device contains 20, 40 and 80 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 3sfb9itifSGXYP/8R5IEvg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 01/03/2020

Application Dated: 01/03/2020
Telepower Communication Co., LTD
201, 203, 502, 504, Building 5, Zone A,
Hantian Technology Town, Guiping Road
Nanhai District, Foshan City, Guangdong Province,
China
 
Attention: Bryan Loo

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AVIC-IP530
Name of Grantee:  Telepower Communication Co., LTD
Equipment Class: Digital Transmission System
Notes: IP Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.01406  

Power listed is the maximum conducted output power. Device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 3sfb9itifSGXYP/8R5IEvg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Telepower Communication Co., LTD
201, 203, 502, 504, Building 5, Zone A, Hantian Technology Town, Guiping Road
Nanhai District, Foshan City, Guangdong Province,
China
  Date of Grant: 01/03/2020

Application Dated: 01/03/2020
 
Attention: Bryan Loo

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AVIC-IP530
Name of Grantee:  Telepower Communication Co., LTD
Equipment Class: Digital Transmission System
Notes: IP Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.01406  

Power listed is the maximum conducted output power. Device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: