FCC ID 2AVKZRM68-NTA

Milimeter Wave Radar Module

by Smart Radar System, Inc.

Grantee Code: 2AVKZ   Product Code: RM68NTA
Latest application date: 2024-05-17

FCC ID Device Details

FCC ID2AVKZRM68-NTA
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AVKZ
Product CodeRM68NTA
Applicant BusinessSmart Radar System, Inc. 🇰🇷
Related Domains smartradarsystem.com
Equipment ClassMilimeter Wave Radar Module
Test FirmDt&C; Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
61000-61500 MHzClass II permissive change or modification of presently authorized equipment2024-05-17
60000-61500 MHzOriginal Equipment2020-02-14

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2024-11-13PDF 474.4 KB
Users ManualUsers Manual2020-08-12PDF 929.3 KB
Internal PhotosInternal Photos2024-11-13PDF 5.2 MB
Internal PhotosInternal Photos2020-08-12PDF 2 MB
External Photos pt. 1External Photos2024-11-13PDF 4.3 MB
External Photos pt.2External Photos2024-11-13PDF 2.8 MB
External PhotosExternal Photos2020-08-12PDF 2.5 MB
Label InfoID Label/Location Info2020-02-14PDF 151.1 KB
TSUP pt. 1Test Setup Photos2024-11-13PDF 5.6 MB
TSUP pt. 2Test Setup Photos2024-11-13PDF 1.6 MB
Test Setup PhotosTest Setup Photos2020-08-12PDF 336 KB
Test ReportTest Report2024-05-17PDF 1.9 MB
Test ReportTest Report2020-02-14PDF 1.7 MB
Attestation Statement part 2.911(d)(7)Attestation Statements2024-05-17PDF 327.7 KB
Attstn Stmts Part 2.911(d)(5)(i)&(ii)Attestation Statements2024-05-17PDF 134.1 KB
Authorization LetterCover Letter(s)2024-05-17PDF 97.7 KB
C2PC LetterCover Letter(s)2024-05-17PDF 128.8 KB
Confidentiality LetterCover Letter(s)2024-05-17PDF 101.2 KB
Confidentiality Request LetterCover Letter(s)2020-02-14PDF 38.8 KB
Modular Approval LetterCover Letter(s)2020-02-14PDF 108.9 KB
POACover Letter(s)2020-02-14PDF 143 KB
RF Exposure MPERF Exposure Info2024-05-17PDF 134.7 KB
MPE CalculationRF Exposure Info2020-02-14PDF 103.4 KB
Block Diagram Metadata onlyBlock DiagramPDF 83.8 KB
Block Diagram Metadata onlyBlock DiagramPDF 69.6 KB
Part Location Schematics Metadata onlySchematicsPDF 720.5 KB
Part Location Schematics Metadata onlySchematicsPDF 109.7 KB
Schematics Metadata onlySchematicsPDF 175.1 KB
Schematics Metadata onlySchematicsPDF 141.4 KB
Antenna Operational Description Metadata onlyOperational DescriptionPDF 241.6 KB
Operational Description Metadata onlyOperational DescriptionPDF 1.2 MB
Operational Description Metadata onlyOperational DescriptionPDF 189.9 KB
Part List Metadata onlyParts List/Tune Up InfoPDF 87.3 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 66.5 KB

Application Information

Application IDUUHW6pX9pWL54HJxpG9gxA==
Final Action Date2024-05-17
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0029105723
ModelRM68-NTA
Frequency Range61000-61500 MHz
Equipment ClassDXX - Part 15 Low Power Communication Device Transmitter
Device DescriptionMilimeter Wave Radar Module
Responsible PartyJaecheol Ahn, Leader of Hardware Development Team, jake.ahn@smartradarsystem.com , 82-31-8018-7188
Test FirmLee Sang-Wook, Dt&C; Co., Ltd., qa@dtnc.net , 82-31-321-2664
TCB Emailtei@timcoengr.com
TCB ScopeA2: Low Power Transmitters (except Spread Spectrum) and radar detectors operating above 1 GHz
Short-Term ConfidentialityYes
Short-Term Confidentiality Date11/13/2024
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Modular Approval. Power listed is EIRP. This device is to be used only for mobile and fixed applications. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Permissive Change: Component changes as described in this filing.

Applications

Application IDDatePurpose
UUHW6pX9pWL54HJxpG9gxA==2024-05-17Class II permissive change or modification of presently authorized equipment
PvJQ5PFfoG+EPhT+1mwuEg==2020-02-14Original Equipment

Equipment Authorization

FrequencyOutputRules
60000-61500 MHz0.681000015C
61000-61500 MHz0.681000015C

Grants

TCB Grant - Application UUHW6pX9pWL54HJxpG9gxA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
13146 NW 86th Drive Suite 400
Alachua, FL 32615
Date of Grant: 05/17/2024

Application Dated: 05/17/2024
Smart Radar System, Inc.
3rd Floor, Fine Venture Bldg, 41
Seongnam-daero 925gil, Bundang-gu
Seongnam-si, Gyeonggi-do, 13496
South Korea
 
Attention: Jaecheol Ahn , Leader of Hardware Development Team

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AVKZRM68-NTA
Name of Grantee:  Smart Radar System, Inc.
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: Milimeter Wave Radar Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 61000.0  -  61500.0 0.681  

Single Modular Approval. Power listed is EIRP. This device is to be used only for mobile and fixed applications. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

Class II Permissive Change: Component changes as described in this filing.


EAS Grant - Application UUHW6pX9pWL54HJxpG9gxA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Smart Radar System, Inc.
3rd Floor, Fine Venture Bldg, 41 Seongnam-daero 925gil, Bundang-gu
Seongnam-si, Gyeonggi-do, 13496
South Korea
  Date of Grant: 05/17/2024

Application Dated: 05/17/2024
 
Attention: Jaecheol Ahn , Leader of Hardware Development Team

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AVKZRM68-NTA
Name of Grantee:  Smart Radar System, Inc.
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: Milimeter Wave Radar Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 61000.0  -  61500.0 0.681  

Single Modular Approval. Power listed is EIRP. This device is to be used only for mobile and fixed applications. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

Class II Permissive Change: Component changes as described in this filing.



TCB Grant - Application PvJQ5PFfoG+EPhT+1mwuEg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 02/14/2020

Application Dated: 02/14/2020
Smart Radar System, Inc.
A-7F, 253, Pangyo-ro, Bundang-gu, Seongnam-si
Gyeonggi-do,
South Korea
 
Attention: Jaecheol Ahn , Leader of Hardware Development Team

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AVKZRM68-NTA
Name of Grantee:  Smart Radar System, Inc.
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: Millimeter Wave Radar Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 60000.0  -  61500.0 0.681  

Single Modular Approval. Power listed is EIRP. This device is to be used only for mobile and fixed applications. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

EAS Grant - Application PvJQ5PFfoG+EPhT+1mwuEg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Smart Radar System, Inc.
A-7F, 253, Pangyo-ro, Bundang-gu, Seongnam-si
Gyeonggi-do,
South Korea
  Date of Grant: 02/14/2020

Application Dated: 02/14/2020
 
Attention: Jaecheol Ahn , Leader of Hardware Development Team

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AVKZRM68-NTA
Name of Grantee:  Smart Radar System, Inc.
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: Millimeter Wave Radar Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 60000.0  -  61500.0 0.681  

Single Modular Approval. Power listed is EIRP. This device is to be used only for mobile and fixed applications. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.



Mail To: