FCC ID 2AVNJ-0001
C2-CPU Radio Board
by KOYO ELECTRONICS INDUSTRIES CO., LTD.
Grantee Code: 2AVNJ Product Code: 0001
Latest application date: 2020-03-31
FCC ID Device Details
| FCC ID | 2AVNJ-0001 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AVNJ |
| Product Code | 0001 |
| Applicant Business | KOYO ELECTRONICS INDUSTRIES CO., LTD. 🇯🇵 |
| Related Domains |  koyoele.co.jp |
| Equipment Class | C2-CPU Radio Board |
| Test Firm | Element Materials Technology Minneapolis |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2020-03-31 |
| 2402-2480 MHz | Original Equipment | 2020-03-31 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Modular Integration Instructions | Users Manual | 2020-03-31 | PDF 315 KB |
| User Manual | Users Manual | 2020-03-31 | PDF 1.6 MB |
| internal photos | Internal Photos | 2020-03-31 | PDF 786.2 KB |
| External Photos | External Photos | 2020-03-31 | PDF 462.1 KB |
| ID Label | ID Label/Location Info | 2020-03-31 | PDF 249 KB |
| Antenna Info | Operational Description | 2020-03-31 | PDF 1.4 MB |
| Test Setup Photos | Test Setup Photos | 2020-03-31 | PDF 1.7 MB |
| Test Report | Test Report | 2020-03-31 | PDF 3.6 MB |
| Test Report part 1 of 2 | Test Report | 2020-03-31 | PDF 3.8 MB |
| Test Report part 1 of 4 | Test Report | 2020-03-31 | PDF 4.3 MB |
| Test Report part 2 of 2 | Test Report | 2020-03-31 | PDF 3.8 MB |
| Test Report part 2 of 4 | Test Report | 2020-03-31 | PDF 5.1 MB |
| Test Report part 3 of 4 | Test Report | 2020-03-31 | PDF 5.3 MB |
| Test Report part 4 of 4 | Test Report | 2020-03-31 | PDF 319 KB |
| Cover Letter | Cover Letter(s) | 2020-03-31 | PDF 502.7 KB |
| Request for confidentiality | Cover Letter(s) | 2020-03-31 | PDF 492.7 KB |
| RF Exposure | RF Exposure Info | 2020-03-31 | PDF 1.1 MB |
| Frequency Block Diagram Metadata only | Block Diagram | PDF 93.2 KB | |
| Schematics Metadata only | Schematics | PDF 941.9 KB | |
| Operational Description Metadata only | Operational Description | PDF 961.2 KB | |
| software security Metadata only | Operational Description | PDF 361.8 KB |
Application Information
| Application ID | OpLoZHzUhLRCyP0sn0+f5Q== |
|---|---|
| Final Action Date | 2020-03-31 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0029130705 |
| Model | 0001 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | C2-CPU Radio Board |
| Responsible Party | Hiroyuki Kuramoto, Kuramoto-Hiroyuki@Koyoele.co.jp , +81-42-345-2015 |
| Test Firm | Renee Walker, Element Materials Technology Minneapolis, renee.walker@element.com  , 503-844-4066 |
| TCB Email | greg.kiemel@element.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Output power is conducted. Approval is limited to Grantee or OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| OpLoZHzUhLRCyP0sn0+f5Q== | 2020-03-31 | Original Equipment |
| G7NG85r8Stx16symKmPYZQ== | 2020-03-31 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application OpLoZHzUhLRCyP0sn0+f5Q==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Element Materials Technology Portland - Evergreen 6775 NE Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 03/31/2020 Application Dated: 03/31/2020 |
| KOYO ELECTRONICS INDUSTRIES CO., LTD. |
| 4-9-1 Tenjin-cho |
| Kodaira-City Tokyo, 1870004 Japan |
| Attention: Hiroyuki Kuramoto |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AVNJ-0001 |
| Name of Grantee: | KOYO ELECTRONICS INDUSTRIES CO., LTD. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | C2-CPU Radio Board |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0178 |
| Single Modular Approval. Output power is conducted. Approval is limited to Grantee or OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application OpLoZHzUhLRCyP0sn0+f5Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
KOYO ELECTRONICS INDUSTRIES CO., LTD. 4-9-1 Tenjin-cho Kodaira-City Tokyo, 1870004 Japan |
Date of Grant: 03/31/2020 Application Dated: 03/31/2020 |
| Attention: Hiroyuki Kuramoto |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AVNJ-0001 |
| Name of Grantee: | KOYO ELECTRONICS INDUSTRIES CO., LTD. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | C2-CPU Radio Board |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0178 |
| Single Modular Approval. Output power is conducted. Approval is limited to Grantee or OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Element Materials Technology Portland - Evergreen 6775 NE Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 03/31/2020 Application Dated: 03/31/2020 |
| KOYO ELECTRONICS INDUSTRIES CO., LTD. |
| 4-9-1 Tenjin-cho |
| Kodaira-City Tokyo, 1870004 Japan |
| Attention: Hiroyuki Kuramoto |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AVNJ-0001 |
| Name of Grantee: | KOYO ELECTRONICS INDUSTRIES CO., LTD. |
| Equipment Class: | Digital Transmission System |
| Notes: | C2-CPU Radio Board |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0096 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.0661 |
| Single Modular Approval. Output power is conducted. Client device per section 15.202 definition. This device supports 20 and 40 MHz SISO operations in the 2.4 GHz band. Approval is limited to Grantee or OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application G7NG85r8Stx16symKmPYZQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
KOYO ELECTRONICS INDUSTRIES CO., LTD. 4-9-1 Tenjin-cho Kodaira-City Tokyo, 1870004 Japan |
Date of Grant: 03/31/2020 Application Dated: 03/31/2020 |
| Attention: Hiroyuki Kuramoto |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AVNJ-0001 |
| Name of Grantee: | KOYO ELECTRONICS INDUSTRIES CO., LTD. |
| Equipment Class: | Digital Transmission System |
| Notes: | C2-CPU Radio Board |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0096 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.0661 |
| Single Modular Approval. Output power is conducted. Client device per section 15.202 definition. This device supports 20 and 40 MHz SISO operations in the 2.4 GHz band. Approval is limited to Grantee or OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |