FCC ID 2AVOB-YRP0R7
Wireless module for load sensors
by Nalloy LLC
Grantee Code: 2AVOB Product Code: YRP0R7
Latest application date: 2024-01-05
FCC ID Device Details
| FCC ID | 2AVOB-YRP0R7 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AVOB |
| Product Code | YRP0R7 |
| Applicant Business | Nalloy LLC 🇺🇸 |
| Equipment Class | Wireless module for load sensors |
| Test Firm | CKC Laboratories, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.4-927.6 MHz | Class II permissive change or modification of presently authorized equipment | 2024-01-05 |
| 902.4-927.6 MHz | Original Equipment | 2021-06-28 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2021-12-21 | PDF 132.1 KB |
| Internal Photos | Internal Photos | 2021-12-21 | PDF 2.8 MB |
| External Photos | External Photos | 2021-12-21 | PDF 2.8 MB |
| ID Label and Location Info | ID Label/Location Info | 2024-01-05 | PDF 152.2 KB |
| ID Label | ID Label/Location Info | 2021-06-28 | PDF 1.1 MB |
| Test Setup Photos | Test Setup Photos | 2021-12-21 | PDF 763.4 KB |
| Antenna Info | Test Report | 2024-01-05 | PDF 158.2 KB |
| Test Report | Test Report | 2024-01-05 | PDF 2.9 MB |
| Test Report | Test Report | 2021-06-28 | PDF 2.9 MB |
| Updated Test Report | Test Report | 2021-06-28 | PDF 1.4 MB |
| Covered Equipment Attestation Statement | Attestation Statements | 2024-01-05 | PDF 281.4 KB |
| US Agency for Service of Process Attestation | Attestation Statements | 2024-01-05 | PDF 103.7 KB |
| Authorization Letter | Cover Letter(s) | 2024-01-05 | PDF 22.6 KB |
| Confidentiality Letter | Cover Letter(s) | 2024-01-05 | PDF 185 KB |
| PCII Letter | Cover Letter(s) | 2024-01-05 | PDF 155.1 KB |
| TCB Letter | Cover Letter(s) | 2024-01-05 | PDF 36.3 KB |
| Amendment Letter | Cover Letter(s) | 2021-06-28 | PDF 119.6 KB |
| Authorization Letter | Cover Letter(s) | 2021-06-28 | PDF 132.8 KB |
| Confidentiality Request | Cover Letter(s) | 2021-06-28 | PDF 185 KB |
| Modular Approval Letter | Cover Letter(s) | 2021-06-28 | PDF 138.5 KB |
| RF Exposure Info | RF Exposure Info | 2024-01-05 | PDF 529.7 KB |
| RF Exposure Info | RF Exposure Info | 2021-06-28 | PDF 95.6 KB |
| Block Diagram Metadata only | Block Diagram | PDF 789.9 KB | |
| Schematics Metadata only | Schematics | PDF 2.2 MB | |
| Operational Description Metadata only | Operational Description | PDF 1.2 MB | |
| Operational Description Metadata only | Operational Description | PDF 112.2 KB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 93.9 KB |
Application Information
| Application ID | uHuflnBWSuM2uBD4X/v/YQ== |
|---|---|
| Final Action Date | 2024-01-05 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0029162138 |
| Model | YRP0R7 |
| Frequency Range | 902.4-927.6 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Wireless module for load sensors |
| Responsible Party | Mohamed Negm, Compliance Engineer, negmmh@gmail.com  , (206) 317-9828 |
| Agent | Michelle Michelle Michelle, CKC Certification Services, LLC., TCBinfo@ckc.com  , 209-299-5240 |
| Test Firm | Steve Behm, CKC Laboratories, Inc., qa@ckc.com , 209-966-5240 |
| TCB Email | tcbadmin@ckc.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | C2PC to add operational mode. Output power is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Approved for antenna(s) as listed in this filing. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| uHuflnBWSuM2uBD4X/v/YQ== | 2024-01-05 | Class II permissive change or modification of presently authorized equipment |
| CfeA4K7Dz6MWvQWQBliStw== | 2021-06-28 | Original Equipment |
Grants
TCB Grant - Application uHuflnBWSuM2uBD4X/v/YQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CKC Certification Services, LLC 5046 Sierra Pines Mariposa, CA 95338 |
Date of Grant: 01/05/2024 Application Dated: 01/05/2024 |
| Nalloy LLC |
| 859 Willard Street, Suite 400 |
| Quincy, MA 02169 |
| Attention: Mohamed Negm , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AVOB-YRP0R7 |
| Name of Grantee: | Nalloy LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless module for load sensors |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.4 - 927.6 | 0.0316 |
| C2PC to add operational mode. Output power is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Approved for antenna(s) as listed in this filing. |
EAS Grant - Application uHuflnBWSuM2uBD4X/v/YQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Nalloy LLC 859 Willard Street, Suite 400 Quincy, MA 02169 United States |
Date of Grant: 01/05/2024 Application Dated: 01/05/2024 |
| Attention: Mohamed Negm , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AVOB-YRP0R7 |
| Name of Grantee: | Nalloy LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless module for load sensors |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.4 - 927.6 | 0.0316 |
| C2PC to add operational mode. Output power is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Approved for antenna(s) as listed in this filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CKC Certification Services, LLC 5046 Sierra Pines Mariposa, CA 95338 |
Date of Grant: 06/28/2021 Application Dated: 06/25/2021 |
| Nalloy LLC |
| 859 Willard Street, Suite 400 |
| Quincy, MA 02169 |
| Attention: Mohamed Negm , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AVOB-YRP0R7 |
| Name of Grantee: | Nalloy LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless module for load sensors |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.4 - 927.6 | 0.087 |
| Output power is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Approved for antenna(s) as listed in this filing. |
EAS Grant - Application CfeA4K7Dz6MWvQWQBliStw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Nalloy LLC 859 Willard Street, Suite 400 Quincy, MA 02169 United States |
Date of Grant: 06/28/2021 Application Dated: 06/25/2021 |
| Attention: Mohamed Negm , Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AVOB-YRP0R7 |
| Name of Grantee: | Nalloy LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless module for load sensors |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.4 - 927.6 | 0.087 |
| Output power is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Approved for antenna(s) as listed in this filing. |
| Mail To: |