FCC ID 2AVOQ01

Flight Instrument For Paragliding / Hang Gliding

by XC Tracer GmbH

Grantee Code: 2AVOQ   Product Code: 01
Latest application date: 2020-06-08

FCC ID Device Details

FCC ID2AVOQ01
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AVOQ
Product Code01
Applicant BusinessXC Tracer GmbH 🇨🇭
Related Domains xctracer.com
Equipment ClassFlight Instrument For Paragliding / Hang Gliding
Test FirmEurofins Electric & Electronic Product Testing AG

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
902.6-927.4 MHzClass II permissive change or modification of presently authorized equipment2020-06-08
902.6-927.4 MHzOriginal Equipment2020-03-06

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2020-08-30PDF 967.2 KB
int. PhotosInternal Photos2020-08-30PDF 1.1 MB
2AVOQ01_IntPho Metadata onlyInternal Photos2020-06-08PDF 2.5 MB
2AVOQ01_IntPhoInternal Photos2020-06-08PDF 1.6 MB
2AVOQ01_IntPho_rInternal Photos2020-06-08PDF 2.5 MB
ext. PhotosExternal Photos2020-08-30PDF 1.6 MB
LabelID Label/Location Info2020-03-06PDF 305.1 KB
Test Setup PhotosTest Setup Photos2020-08-30PDF 590.3 KB
2AVOQ01_TRptTest Report2020-06-08PDF 4.6 MB
2AVOQ01_TRpt_03Test Report2020-06-08PDF 4.5 MB
Test ReportTest Report2020-03-06PDF 3.5 MB
2AVOQ01_AutLetCover Letter(s)2020-06-08PDF 215.1 KB
2AVOQ01_C2PC letterCover Letter(s)2020-06-08PDF 205.1 KB
2AVOQ01_ConReqCover Letter(s)2020-06-08PDF 261.2 KB
Long-Term ConReqCover Letter(s)2020-03-06PDF 263.1 KB
PoACover Letter(s)2020-03-06PDF 216.2 KB
Short-Term ConReqCover Letter(s)2020-03-06PDF 280.5 KB
Block Diagram Metadata onlyBlock DiagramPDF 81.9 KB
2AVOQ01_Schem Metadata onlySchematicsPDF 71.9 KB
Schematics Metadata onlySchematicsPDF 109.1 KB
AntSpec Metadata onlyOperational DescriptionPDF 209.9 KB
OpDes Metadata onlyOperational DescriptionPDF 95.4 KB
2AVOQ01_PartLst Metadata onlyParts List/Tune Up InfoPDF 50.1 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 243.8 KB

Application Information

Application IDezP3IOBbiJN8qHRyYunbBQ==
Final Action Date2020-06-08
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0029177094
Model01
Frequency Range902.6-927.4 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionFlight Instrument For Paragliding / Hang Gliding
Responsible PartyKonrad Samuel Schafroth, CEO, info@xctracer.com , +41 79 4786414
Test FirmJohannes Biner, Eurofins Electric & Electronic Product Testing AG, JohannesBiner@eurofins.ch , 41-79-256-21-55
TCB Emailjoergkusig@eurofins.de
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsC2PC: Product modification Power listed is maximum peak conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.

Applications

Application IDDatePurpose
ezP3IOBbiJN8qHRyYunbBQ==2020-06-08Class II permissive change or modification of presently authorized equipment
UgPmzLfTak1rvM9IIzD49Q==2020-03-06Original Equipment

Equipment Authorization

FrequencyOutputRules
902.6-927.4 MHz0.034600015C

Grants

TCB Grant - Application UgPmzLfTak1rvM9IIzD49Q==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany
Date of Grant: 03/06/2020

Application Dated: 03/06/2020
XC Tracer GmbH
Junkerngasse 53
Bern, 3011
Switzerland
 
Attention: Konrad Schafroth , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AVOQ01
Name of Grantee:  XC Tracer GmbH
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Flight Instrument For Paragliding / Hang Gliding
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.6  -  927.4 0.0346  

Power listed is maximum peak conducted.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.


EAS Grant - Application UgPmzLfTak1rvM9IIzD49Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

XC Tracer GmbH
Junkerngasse 53
Bern, 3011
Switzerland
  Date of Grant: 03/06/2020

Application Dated: 03/06/2020
 
Attention: Konrad Schafroth , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AVOQ01
Name of Grantee:  XC Tracer GmbH
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Flight Instrument For Paragliding / Hang Gliding
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.6  -  927.4 0.0346  

Power listed is maximum peak conducted.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.



TCB Grant - Application ezP3IOBbiJN8qHRyYunbBQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany
Date of Grant: 06/08/2020

Application Dated: 06/08/2020
XC Tracer GmbH
Junkerngasse 53
Bern, 3011
Switzerland
 
Attention: Konrad Schafroth , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AVOQ01
Name of Grantee:  XC Tracer GmbH
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Flight Instrument For Paragliding / Hang Gliding
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.6  -  927.4 0.0346  

C2PC: Product modification

Power listed is maximum peak conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.


EAS Grant - Application ezP3IOBbiJN8qHRyYunbBQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

XC Tracer GmbH
Junkerngasse 53
Bern, 3011
Switzerland
  Date of Grant: 06/08/2020

Application Dated: 06/08/2020
 
Attention: Konrad Schafroth , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AVOQ01
Name of Grantee:  XC Tracer GmbH
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Flight Instrument For Paragliding / Hang Gliding
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.6  -  927.4 0.0346  

C2PC: Product modification

Power listed is maximum peak conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.



Mail To: