FCC ID 2AVQ5BT-ACTB
ALS Training Simulator
by BT Inc.
Grantee Code: 2AVQ5 Product Code: BTACTB
Latest application date: 2020-03-10
FCC ID Device Details
| FCC ID | 2AVQ5BT-ACTB |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AVQ5 |
| Product Code | BTACTB |
| Applicant Business | BT Inc. 🇰🇷 |
| Equipment Class | ALS Training Simulator |
| Test Firm | LTA Co.,Ltd |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2020-03-10 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: S7A-IW05 Grant Date: 01/13/2017 | 2020-02-28 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2020-09-02 | PDF 4.9 MB |
| Internal Photos | Internal Photos | 2020-09-02 | PDF 1.9 MB |
| External Photos | External Photos | 2020-09-02 | PDF 487.8 KB |
| external photos | External Photos | 2020-08-26 | PDF 196.6 KB |
| Label Info | ID Label/Location Info | 2020-03-10 | PDF 77.6 KB |
| label&location | ID Label/Location Info | 2020-02-28 | PDF 91.8 KB |
| Test Setup Photos | Test Setup Photos | 2020-09-02 | PDF 287.6 KB |
| Test Report | Test Report | 2020-03-10 | PDF 1.3 MB |
| Authorization Letter | Cover Letter(s) | 2020-03-10 | PDF 17.8 KB |
| Class II Permissive Change Cover Letter | Cover Letter(s) | 2020-03-10 | PDF 26.5 KB |
| Confidentitality Letter | Cover Letter(s) | 2020-03-10 | PDF 244.5 KB |
| Cover Letter | Cover Letter(s) | 2020-03-10 | PDF 30.1 KB |
| POA | Cover Letter(s) | 2020-02-28 | PDF 18.5 KB |
| change in ID request letter | Cover Letter(s) | 2020-02-28 | PDF 37.4 KB |
| confidentiality request letter | Cover Letter(s) | 2020-02-28 | PDF 141.5 KB |
| permissive letter from original applicant | Cover Letter(s) | 2020-02-28 | PDF 30.4 KB |
| Block Diagram Metadata only | Block Diagram | PDF 21.3 KB | |
| Schematics Metadata only | Schematics | PDF 1.2 MB | |
| Operational Description Metadata only | Operational Description | PDF 350.9 KB | |
| Specifications Antenna Operational Description Metadata only | Operational Description | PDF 382 KB | |
| Part List Metadata only | Parts List/Tune Up Info | PDF 144.1 KB |
Application Information
| Application ID | OLgm2Cj1Jn+xcUPC3juY+g== |
|---|---|
| Final Action Date | 2020-03-10 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0029242815 |
| Model | BT-ACTB |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | ALS Training Simulator |
| Responsible Party | DAE YONG KIM, btnhk@naver.com  , +82-10-2756-2614 |
| Test Firm | Ahn Chulho, LTA Co.,Ltd, chahn@ltalab.com  , 82-31-323-6008 |
| TCB Email | TEI@TIMCOENGR.COM  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 09/02/2020 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Split Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Limited Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter or in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| OLgm2Cj1Jn+xcUPC3juY+g== | 2020-03-10 | Class II permissive change or modification of presently authorized equipment |
| 6gYI2f8RuVyxUGcWURi7vg== | 2020-02-28 | Change in identification of presently authorized equipment. Original FCC ID: S7A-IW05 Grant Date: 01/13/2017 |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2402-2480 MHz | 0.0200000 | 15C |
Grants
TCB Grant - Application OLgm2Cj1Jn+xcUPC3juY+g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 03/10/2020 Application Dated: 03/06/2020 |
| BT Inc. |
| A-313 Samsong Techno-valley, 140, Tongil-ro, |
| Deogyang-gu, Goyang-si, Gyeonggi-do, South Korea |
| Attention: DAE YONG KIM |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AVQ5BT-ACTB |
| Name of Grantee: | BT Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | ALS Training Simulator |
| Modular Type: | Limited Split Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.02 |
| Limited Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter or in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
EAS Grant - Application OLgm2Cj1Jn+xcUPC3juY+g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
BT Inc. A-313 Samsong Techno-valley, 140, Tongil-ro, Deogyang-gu, Goyang-si, Gyeonggi-do, South Korea |
Date of Grant: 03/10/2020 Application Dated: 03/06/2020 |
| Attention: DAE YONG KIM |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AVQ5BT-ACTB |
| Name of Grantee: | BT Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | ALS Training Simulator |
| Modular Type: | Limited Split Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.02 |
| Limited Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter or in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 02/28/2020 Application Dated: 02/28/2020 |
| BT Inc. |
| A-313 Samsong Techno-valley, 140, Tongil-ro, |
| Deogyang-gu, Goyang-si, Gyeonggi-do, South Korea |
| Attention: DAE YONG KIM |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AVQ5BT-ACTB |
| Name of Grantee: | BT Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.02 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter or in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
EAS Grant - Application 6gYI2f8RuVyxUGcWURi7vg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
BT Inc. A-313 Samsong Techno-valley, 140, Tongil-ro, Deogyang-gu, Goyang-si, Gyeonggi-do, South Korea |
Date of Grant: 02/28/2020 Application Dated: 02/28/2020 |
| Attention: DAE YONG KIM |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AVQ5BT-ACTB |
| Name of Grantee: | BT Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.02 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter or in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| Mail To: |