FCC ID 2AVW3-MWF220HDB
Industrial dual band Wi-Fi radio module
by EMBUX Technology Co. Ltd.
Grantee Code: 2AVW3 Product Code: MWF220HDB
Latest application date: 2020-04-01
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Original Equipment | 2020-04-01 |
| 5180-5240 MHz | Original Equipment | 2020-04-01 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User-Manual | Users Manual | 2020-04-01 | PDF 1,008.4 KB |
| Internal_Photos | Internal Photos | 2020-04-01 | PDF 1.7 MB |
| EXT_PHOTO | External Photos | 2020-04-01 | PDF 1,008.4 KB |
| External_photos | External Photos | 2020-04-01 | PDF 1,008.4 KB |
| Label_and_Label_Location | ID Label/Location Info | 2020-04-01 | PDF 148.3 KB |
| Label_location | ID Label/Location Info | 2020-04-01 | PDF 148.3 KB |
| Test_Setup_Photos | Test Setup Photos | 2020-04-01 | PDF 170.1 KB |
| Test_Setup_photos | Test Setup Photos | 2020-04-01 | PDF 170.1 KB |
| MWF220HDB DFS FCC Test Report | Test Report | 2020-04-01 | PDF 1.4 MB |
| MWF220HDB FCC ID 15.247 Test Report - 2.4G WiFi | Test Report | 2020-04-01 | PDF 4.8 MB |
| MWF220HDB FCC ID 15.407 Test Report - 5.8gwifi | Test Report | 2020-04-01 | PDF 2.1 MB |
| MWF220HDB FCC ID 15.407 Test Report 5150-5720 | Test Report | 2020-04-01 | PDF 5.7 MB |
| Agent_Authorization | Cover Letter(s) | 2020-04-01 | PDF 11.5 KB |
| FCC Modular Approval Request Rev 2.1 | Cover Letter(s) | 2020-04-01 | PDF 16 KB |
| FCC Software Configuration Control Declaration | Cover Letter(s) | 2020-04-01 | PDF 879.6 KB |
| FCC_Short_&_Long_Term_Confidentiality_Request | Cover Letter(s) | 2020-04-01 | PDF 12.2 KB |
| MPE | RF Exposure Info | 2020-04-01 | PDF 37.4 KB |
| MPE_report | RF Exposure Info | 2020-04-01 | PDF 37.4 KB |
| Block Diagram Metadata only | Block Diagram | PDF 131 KB | |
| SCH Metadata only | Schematics | PDF 138 KB | |
| Operation_Description Metadata only | Operational Description | PDF 61.5 KB | |
| Operational_Description Metadata only | Operational Description | PDF 61.5 KB | |
| Software security requirement Metadata only | SDR Software/Security Inf | PDF 732.9 KB |
Application Information
| Application ID | Q+I5eKZCYNcqXU6IOOwXbQ== |
|---|---|
| Final Action Date | 2020-04-01 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0029331212 |
| Model | MWF220HDB |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Industrial dual band Wi-Fi radio module |
| Responsible Party | Steve Chen, stevechen@embux.com  , +886-2-8226-7786 |
| Technical Contact | EMBUX Technology Co. Ltd., stevechen@embux.com |
| Test Firm | Jason Zhou, Shenzhen HUAK Testing Technology Co., Ltd., jason@cer-mark.com  , +86-755-23029901 |
| TCB Email | certification@micomlabs.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Limited Modular Approval. Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| Q+I5eKZCYNcqXU6IOOwXbQ== | 2020-04-01 | Original Equipment |
| 0KBmtMZpHO5oYJU83Yw2WQ== | 2020-04-01 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application Q+I5eKZCYNcqXU6IOOwXbQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 04/01/2020 Application Dated: 04/01/2020 |
| EMBUX Technology Co. Ltd. |
| 13F, No. 920, Chung-Cheng Rd. |
| Zhonghe Dist., New Taipei City, 23586 Taiwan |
| Attention: Steve Chen |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AVW3-MWF220HDB |
| Name of Grantee: | EMBUX Technology Co. Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Industrial dual band Wi-Fi radio module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.15066 |
| Limited Modular Approval. Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application Q+I5eKZCYNcqXU6IOOwXbQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
EMBUX Technology Co. Ltd. 13F, No. 920, Chung-Cheng Rd. Zhonghe Dist., New Taipei City, 23586 Taiwan |
Date of Grant: 04/01/2020 Application Dated: 04/01/2020 |
| Attention: Steve Chen |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AVW3-MWF220HDB |
| Name of Grantee: | EMBUX Technology Co. Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Industrial dual band Wi-Fi radio module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.15066 |
| Limited Modular Approval. Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 04/01/2020 Application Dated: 04/01/2020 |
| EMBUX Technology Co. Ltd. |
| 13F, No. 920, Chung-Cheng Rd. |
| Zhonghe Dist., New Taipei City, 23586 Taiwan |
| Attention: Steve Chen |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AVW3-MWF220HDB |
| Name of Grantee: | EMBUX Technology Co. Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Industrial dual band Wi-Fi radio module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.09661 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.09419 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.09397 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.14521 |
| Limited Modular Approval. Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application 0KBmtMZpHO5oYJU83Yw2WQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
EMBUX Technology Co. Ltd. 13F, No. 920, Chung-Cheng Rd. Zhonghe Dist., New Taipei City, 23586 Taiwan |
Date of Grant: 04/01/2020 Application Dated: 04/01/2020 |
| Attention: Steve Chen |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AVW3-MWF220HDB |
| Name of Grantee: | EMBUX Technology Co. Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Industrial dual band Wi-Fi radio module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.09661 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.09419 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.09397 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.14521 |
| Limited Modular Approval. Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |