FCC ID 2AW3I-KNC1
Key cutting machine
by Shenzhen Xtooltech Intelligent Co., Ltd
Grantee Code: 2AW3I Product Code: KNC1
Latest application date: 2022-02-14
FCC ID Device Details
| FCC ID | 2AW3I-KNC1 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AW3I |
| Product Code | KNC1 |
| Applicant Business | Shenzhen Xtooltech Intelligent Co., Ltd 🇨🇳 |
| Related Domains |  xtooltech.com |
| Equipment Class | Key cutting machine |
| Test Firm | Shenzhen LCS Compliance Testing Laboratory Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Original Equipment | 2022-02-14 |
| 2402-2480 MHz | Original Equipment | 2022-02-14 |
| 5180-5240 MHz | Original Equipment | 2022-02-14 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2022-02-14 | PDF 983.3 KB |
| Internal Photo | Internal Photos | 2022-02-14 | PDF 1.6 MB |
| Internal Photos | Internal Photos | 2022-02-14 | PDF 1.6 MB |
| Internal photos | Internal Photos | 2022-02-14 | PDF 1.6 MB |
| External Photos | External Photos | 2022-02-14 | PDF 406.2 KB |
| External photos | External Photos | 2022-02-14 | PDF 406.2 KB |
| Label and Location | ID Label/Location Info | 2022-02-14 | PDF 61.9 KB |
| Label and location | ID Label/Location Info | 2022-02-14 | PDF 61.9 KB |
| Test Setup Photos | Test Setup Photos | 2022-02-14 | PDF 420.1 KB |
| Test setup photo | Test Setup Photos | 2022-02-14 | PDF 420.1 KB |
| Test Report | Test Report | 2022-02-14 | PDF 4.8 MB |
| Test Report | Test Report | 2022-02-14 | PDF 3.4 MB |
| Test Report | Test Report | 2022-02-14 | PDF 5.8 MB |
| Agent Authorization Rev 1.0 | Cover Letter(s) | 2022-02-14 | PDF 31.6 KB |
| FCC Short & Long Term Confidentiality Request Rev4.1 | Cover Letter(s) | 2022-02-14 | PDF 83 KB |
| FCC Software Configuration Control Declaration Rev1.1 | Cover Letter(s) | 2022-02-14 | PDF 91.2 KB |
| Wi-Fi Channel 12 and 13 Declaration Letter R01 | Cover Letter(s) | 2022-02-14 | PDF 377.8 KB |
| RF Exposure | RF Exposure Info | 2022-02-14 | PDF 525.6 KB |
| Block Metadata only | Block Diagram | PDF 73 KB | |
| BlockDiagram Metadata only | Block Diagram | PDF 73 KB | |
| SCH Metadata only | Schematics | PDF 991.3 KB | |
| Schematic Metadata only | Schematics | PDF 991.3 KB | |
| OP Metadata only | Operational Description | PDF 165.4 KB | |
| Operation Description Metadata only | Operational Description | PDF 165.4 KB | |
| Software Security Requirements For U-NII Devices Metadata only | SDR Software/Security Inf | PDF 139.1 KB |
Application Information
| Application ID | aRtftCCt+4ofxBwiMalR0g== |
|---|---|
| Final Action Date | 2022-02-14 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0029799749 |
| Model | KNC1 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Key cutting machine |
| Responsible Party | Darby Tan, Overseas Sales Director, darby.tan@xtooltech.com , 0755-83467556 |
| Technical Contact | Shenzhen Xtooltech Intelligent Co., Ltd, darby.tan@xtooltech.com |
| Test Firm | Gavin Liang, Shenzhen LCS Compliance Testing Laboratory Ltd., gavin.liang@lcs-cert.com  , 0755-82591330 |
| TCB Email | certification@micomlabs.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is the maximum conducted output power.This device contains 20 and 40 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| aRtftCCt+4ofxBwiMalR0g== | 2022-02-14 | Original Equipment |
| 7FKfJfmkXf7TLcpMxSx3/g== | 2022-02-14 | Original Equipment |
| 0LOmld1DTEoDbeOqYj7pMw== | 2022-02-14 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application aRtftCCt+4ofxBwiMalR0g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 02/14/2022 Application Dated: 02/14/2022 |
| Shenzhen Xtooltech Intelligent Co., Ltd |
| 17&18/F, A2 Building, Creative City, Liuxian |
| Avenue, Nanshan District, Shenzhen |
| Shenzhen, 518000 China |
| Attention: Darby Tan , Overseas Sales Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AW3I-KNC1 |
| Name of Grantee: | Shenzhen Xtooltech Intelligent Co., Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | Key cutting machine |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.032 |
| Power listed is the maximum conducted output power.This device contains 20 and 40 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application aRtftCCt+4ofxBwiMalR0g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Xtooltech Intelligent Co., Ltd 17&18/F, A2 Building, Creative City, Liuxian Avenue, Nanshan District, Shenzhen Shenzhen, 518000 China |
Date of Grant: 02/14/2022 Application Dated: 02/14/2022 |
| Attention: Darby Tan , Overseas Sales Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AW3I-KNC1 |
| Name of Grantee: | Shenzhen Xtooltech Intelligent Co., Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | Key cutting machine |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.032 |
| Power listed is the maximum conducted output power.This device contains 20 and 40 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 02/14/2022 Application Dated: 02/14/2022 |
| Shenzhen Xtooltech Intelligent Co., Ltd |
| 17&18/F, A2 Building, Creative City, Liuxian |
| Avenue, Nanshan District, Shenzhen |
| Shenzhen, 518000 China |
| Attention: Darby Tan , Overseas Sales Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AW3I-KNC1 |
| Name of Grantee: | Shenzhen Xtooltech Intelligent Co., Ltd |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Key cutting machine |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.007 |
| Power listed is the maximum conducted output power. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 7FKfJfmkXf7TLcpMxSx3/g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Xtooltech Intelligent Co., Ltd 17&18/F, A2 Building, Creative City, Liuxian Avenue, Nanshan District, Shenzhen Shenzhen, 518000 China |
Date of Grant: 02/14/2022 Application Dated: 02/14/2022 |
| Attention: Darby Tan , Overseas Sales Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AW3I-KNC1 |
| Name of Grantee: | Shenzhen Xtooltech Intelligent Co., Ltd |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Key cutting machine |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.007 |
| Power listed is the maximum conducted output power. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 02/14/2022 Application Dated: 02/14/2022 |
| Shenzhen Xtooltech Intelligent Co., Ltd |
| 17&18/F, A2 Building, Creative City, Liuxian |
| Avenue, Nanshan District, Shenzhen |
| Shenzhen, 518000 China |
| Attention: Darby Tan , Overseas Sales Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AW3I-KNC1 |
| Name of Grantee: | Shenzhen Xtooltech Intelligent Co., Ltd |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Key cutting machine |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.012 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.019 | ||
| 38 CC ND | 15E | 5500.0 - 5700.0 | 0.018 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.015 |
| Power listed is the maximum conducted output power. This device contains 20, 40 and 80 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application 0LOmld1DTEoDbeOqYj7pMw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Xtooltech Intelligent Co., Ltd 17&18/F, A2 Building, Creative City, Liuxian Avenue, Nanshan District, Shenzhen Shenzhen, 518000 China |
Date of Grant: 02/14/2022 Application Dated: 02/14/2022 |
| Attention: Darby Tan , Overseas Sales Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AW3I-KNC1 |
| Name of Grantee: | Shenzhen Xtooltech Intelligent Co., Ltd |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Key cutting machine |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.012 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.019 | ||
| 38 CC ND | 15E | 5500.0 - 5700.0 | 0.018 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.015 |
| Power listed is the maximum conducted output power. This device contains 20, 40 and 80 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |