FCC ID 2AW5W-CPW

CARPLAY

by REXING INC.

Grantee Code: 2AW5W   Product Code: CPW
Latest application date: 2024-06-18

FCC ID Device Details

FCC ID2AW5W-CPW
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AW5W
Product CodeCPW
Applicant BusinessREXING INC. 🇺🇸
Equipment ClassCARPLAY
Test FirmSHENZHEN CTA TESTING TECHNOLOGY CO., LTD.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2024-06-18
5180-5240 MHzOriginal Equipment2024-06-18

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2024-06-18PDF 1.2 MB
Internal PhotosInternal Photos2024-06-18PDF 577.4 KB
External PhotosExternal Photos2024-06-18PDF 424.1 KB
Label and Label LocationID Label/Location Info2024-06-18PDF 75.1 KB
Test Setup PhotosTest Setup Photos2024-06-18PDF 176.8 KB
Antenna specificationTest Report2024-06-18PDF 773.2 KB
Test Report-BLETest Report2024-06-18PDF 4 MB
Test Report_5G WIFITest Report2024-06-18PDF 4.6 MB
Covered Equipment Attestation_2.911(d)(5)(i) and (ii)Attestation Statements2024-06-18PDF 68.4 KB
US_Agent_2.911(d)(7)-U_V05Attestation Statements2024-06-18PDF 28.1 KB
FCC Confidentiality request letterCover Letter(s)2024-06-18PDF 112.3 KB
FCC POACover Letter(s)2024-06-18PDF 117 KB
FCC UNII Device Declaration Letter-SlaverCover Letter(s)2024-06-18PDF 48.2 KB
FCC RF Exposure-MPERF Exposure Info2024-06-18PDF 145 KB
Block diagram Metadata onlyBlock DiagramPDF 82.7 KB
schematic Metadata onlySchematicsPDF 136.4 KB
Operation Description Metadata onlyOperational DescriptionPDF 122.2 KB
Declaration Letter of Software Security Requirements-Slaver Metadata onlySDR Software/Security Info.PDF 128.2 KB

Application Information

Application IDYzr/Qasfg2UZaEAi8ulr3g==
Final Action Date2024-06-18
Application PurposeOriginal Equipment
Applicant FRN0029828688
ModelCPW
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionCARPLAY
Responsible PartyYuhe Sun, General Manager, islandsunyuhe@qq.com , 2032144881
Test FirmEric Wang, SHENZHEN CTA TESTING TECHNOLOGY CO., LTD., wangxulai@cta-test.cn , +86 755 2322 5875
TCB Emailjoerdismitzloff@eurofins.de
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput Power listed is peak conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
Yzr/Qasfg2UZaEAi8ulr3g==2024-06-18Original Equipment
O1ECOw9O0d1azZ7wNrPJeQ==2024-06-18Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.000800015CCC
5180-5240 MHz0.031000015ECC

Grants

TCB Grant - Application Yzr/Qasfg2UZaEAi8ulr3g==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany
Date of Grant: 06/18/2024

Application Dated: 06/18/2024
REXING INC.
34 Ludwig St,
Little Ferry, NJ 07643
 
Attention: Yuhe Sun , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AW5W-CPW
Name of Grantee:  REXING INC.
Equipment Class: Digital Transmission System
Notes: CARPLAY
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0008  

Output Power listed is peak conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Yzr/Qasfg2UZaEAi8ulr3g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

REXING INC.
34 Ludwig St,
Little Ferry, NJ 07643
United States
  Date of Grant: 06/18/2024

Application Dated: 06/18/2024
 
Attention: Yuhe Sun , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AW5W-CPW
Name of Grantee:  REXING INC.
Equipment Class: Digital Transmission System
Notes: CARPLAY
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0008  

Output Power listed is peak conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application O1ECOw9O0d1azZ7wNrPJeQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany
Date of Grant: 06/18/2024

Application Dated: 06/18/2024
REXING INC.
34 Ludwig St,
Little Ferry, NJ 07643
 
Attention: Yuhe Sun , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AW5W-CPW
Name of Grantee:  REXING INC.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: CARPLAY
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.031  

Output power listed is average conducted. This device supports 802.11a, 802.11n and 802.11ac with a 20 MHz, 40 MHz and 80 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application O1ECOw9O0d1azZ7wNrPJeQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

REXING INC.
34 Ludwig St,
Little Ferry, NJ 07643
United States
  Date of Grant: 06/18/2024

Application Dated: 06/18/2024
 
Attention: Yuhe Sun , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AW5W-CPW
Name of Grantee:  REXING INC.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: CARPLAY
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.031  

Output power listed is average conducted. This device supports 802.11a, 802.11n and 802.11ac with a 20 MHz, 40 MHz and 80 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: