FCC ID 2AW9M-P6

Projector

by Shenzhen Efercro Electronic Technology Co., Ltd.

Grantee Code: 2AW9M   Product Code: P6
Latest application date: 2025-01-24

FCC ID Device Details

FCC ID2AW9M-P6
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AW9M
Product CodeP6
Applicant BusinessShenzhen Efercro Electronic Technology Co., Ltd. 🇨🇳
Related Domains yihengke.cn
Equipment ClassProjector
Test FirmShenzhen LCS Compliance Testing Laboratory Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2025-01-24
2402-2480 MHzOriginal Equipment2025-01-24
5180-5240 MHzOriginal Equipment2025-01-24

Exhibits

DocumentTypeAvailableFile
User manualUsers Manual2025-01-24PDF 747 KB
Internal photosInternal Photos2025-01-24PDF 1.5 MB
External photosExternal Photos2025-01-24PDF 921.7 KB
Label and label locationID Label/Location Info2025-01-24PDF 339.2 KB
Test setup photosTest Setup Photos2025-01-24PDF 794.9 KB
Antenna informationTest Report2025-01-24PDF 430.3 KB
Appendix A test data BTTest Report2025-01-24PDF 4.4 MB
Appendix B test data BT LETest Report2025-01-24PDF 2.5 MB
Appendix C test data 2G4WLAN part 1Test Report2025-01-24PDF 3.4 MB
Appendix C test data 2G4WLAN part 2Test Report2025-01-24PDF 2.1 MB
Appendix D test data 5GWLAN band 1Test Report2025-01-24PDF 5 MB
Appendix E test data 5GWLAN band 2ATest Report2025-01-24PDF 5 MB
Appendix F test data 5GWLAN band 2CTest Report2025-01-24PDF 5.5 MB
Appendix G test data 5GWLAN band 3Test Report2025-01-24PDF 5.2 MB
Test Report 2G4WLANTest Report2025-01-24PDF 2.8 MB
Test Report 5GWLAN band 1Test Report2025-01-24PDF 2.8 MB
Test Report 5GWLAN band 2Test Report2025-01-24PDF 4.1 MB
Test Report 5GWLAN band 3Test Report2025-01-24PDF 2.8 MB
Test Report BTTest Report2025-01-24PDF 2.5 MB
Test Report BT LETest Report2025-01-24PDF 2.3 MB
Test Report DFSTest Report2025-01-24PDF 4.5 MB
Agent attestation letterAttestation Statements2025-01-24PDF 452.4 KB
Covered equipment letterAttestation Statements2025-01-24PDF 728.9 KB
Confidentiality request letterCover Letter(s)2025-01-24PDF 500.7 KB
Letter of declaration disable channel 12 and 13 by softwareCover Letter(s)2025-01-24PDF 728.5 KB
Letter of declaration model differenceCover Letter(s)2025-01-24PDF 470.7 KB
RF exposure evaluationRF Exposure Info2025-01-24PDF 1.9 MB
Block diagram Metadata onlyBlock DiagramPDF 318.2 KB
Schematic Metadata onlySchematicsPDF 853.1 KB
Letter of declaration unii device Metadata onlyOperational DescriptionPDF 1 MB
Letter of declaration unii device software configuration control Metadata onlyOperational DescriptionPDF 461.6 KB
Letter of declaration unii device software security requirements Metadata onlyOperational DescriptionPDF 2.1 MB
Operation description Metadata onlyOperational DescriptionPDF 332 KB

Application Information

Application IDlNY8Xs+yNf0GZqlz3CtEGg==
Final Action Date2025-01-24
Application PurposeOriginal Equipment
Applicant FRN0029852571
ModelP6
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionProjector
Responsible PartyHongyan Wang, hongyan.wang@yihengke.cn , 13537518772
Test FirmGavin Liang, Shenzhen LCS Compliance Testing Laboratory Ltd., gavin.liang@lcs-cert.com , 0755-82591330
TCB Emailo.kneip@kl-certification.de
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is maximum peak conducted output power. The product must be installed such that its antenna(s) can provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. The device also contains 2.4GHz WLAN, 5GHz WLAN and BLE transmitters.

Applications

Application IDDatePurpose
lNY8Xs+yNf0GZqlz3CtEGg==2025-01-24Original Equipment
NAvh6TPSwkqaW2Rr7rTNYQ==2025-01-24Original Equipment
IKgktJycLpiNBFqfd2sI+A==2025-01-24Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.001300015CCC
2402-2480 MHz0.0009615CCC
2412-2462 MHz0.040115CCC
5180-5240 MHz0.030315ECC
5260-5320 MHz0.03315ECC, ND
5500-5700 MHz0.018715ECC, ND
5745-5825 MHz0.023115ECC

Grants

TCB Grant - Application NAvh6TPSwkqaW2Rr7rTNYQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  KL-Certification GmbH
Heinrich-Hertz-Allee 7
St. Ingbert, 66386
Germany
Date of Grant: 01/24/2025

Application Dated: 01/24/2025
Shenzhen Efercro Electronic Technology Co., Ltd.
Room 901, Block E, Building 1, Section 1,
Chuangzhi Yuncheng, Liuxian Avenue, Xili Community
, Xili Street, Nanshan District, Shenzhen, 518126
China
 
Attention: Hongyan Wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AW9M-P6
Name of Grantee:  Shenzhen Efercro Electronic Technology Co., Ltd.
Equipment Class: Digital Transmission System
Notes: Projector
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00096  
CC 15C 2412.0  -  2462.0 0.0401  

Power listed is maximum peak conducted output power. The device supports both 20 MHz and 40 MHz bandwidth modes as described in this filing. The product must be installed such that its antenna(s) can provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. Device is a client only device containing a 802.11b/g/n/ax modes configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. The device also contains 5GHz WLAN and Bluetooth transmitters.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application NAvh6TPSwkqaW2Rr7rTNYQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shenzhen Efercro Electronic Technology Co., Ltd.
Room 901, Block E, Building 1, Section 1, Chuangzhi Yuncheng, Liuxian Avenue, Xili Community
, Xili Street, Nanshan District, Shenzhen, 518126
China
  Date of Grant: 01/24/2025

Application Dated: 01/24/2025
 
Attention: Hongyan Wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AW9M-P6
Name of Grantee:  Shenzhen Efercro Electronic Technology Co., Ltd.
Equipment Class: Digital Transmission System
Notes: Projector
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00096  
CC 15C 2412.0  -  2462.0 0.0401  

Power listed is maximum peak conducted output power. The device supports both 20 MHz and 40 MHz bandwidth modes as described in this filing. The product must be installed such that its antenna(s) can provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. Device is a client only device containing a 802.11b/g/n/ax modes configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. The device also contains 5GHz WLAN and Bluetooth transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application lNY8Xs+yNf0GZqlz3CtEGg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  KL-Certification GmbH
Heinrich-Hertz-Allee 7
St. Ingbert, 66386
Germany
Date of Grant: 01/24/2025

Application Dated: 01/24/2025
Shenzhen Efercro Electronic Technology Co., Ltd.
Room 901, Block E, Building 1, Section 1,
Chuangzhi Yuncheng, Liuxian Avenue, Xili Community
, Xili Street, Nanshan District, Shenzhen, 518126
China
 
Attention: Hongyan Wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AW9M-P6
Name of Grantee:  Shenzhen Efercro Electronic Technology Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Projector
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0013  

Power listed is maximum peak conducted output power. The product must be installed such that its antenna(s) can provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. The device also contains 2.4GHz WLAN, 5GHz WLAN and BLE transmitters.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application lNY8Xs+yNf0GZqlz3CtEGg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shenzhen Efercro Electronic Technology Co., Ltd.
Room 901, Block E, Building 1, Section 1, Chuangzhi Yuncheng, Liuxian Avenue, Xili Community
, Xili Street, Nanshan District, Shenzhen, 518126
China
  Date of Grant: 01/24/2025

Application Dated: 01/24/2025
 
Attention: Hongyan Wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AW9M-P6
Name of Grantee:  Shenzhen Efercro Electronic Technology Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Projector
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0013  

Power listed is maximum peak conducted output power. The product must be installed such that its antenna(s) can provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. The device also contains 2.4GHz WLAN, 5GHz WLAN and BLE transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application IKgktJycLpiNBFqfd2sI+A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  KL-Certification GmbH
Heinrich-Hertz-Allee 7
St. Ingbert, 66386
Germany
Date of Grant: 01/24/2025

Application Dated: 01/24/2025
Shenzhen Efercro Electronic Technology Co., Ltd.
Room 901, Block E, Building 1, Section 1,
Chuangzhi Yuncheng, Liuxian Avenue, Xili Community
, Xili Street, Nanshan District, Shenzhen, 518126
China
 
Attention: Hongyan Wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AW9M-P6
Name of Grantee:  Shenzhen Efercro Electronic Technology Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Projector
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0303  
CC ND 15E 5260.0  -  5320.0 0.033  
CC ND 15E 5500.0  -  5700.0 0.0187  
CC 15E 5745.0  -  5825.0 0.0231  

Power listed is maximum average conducted output power. This device supports both 20 MHz and 40 MHz bandwidth modes as described in this filing. The product must be installed such that its antenna(s) can provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. Device is a client only device containing a 802.11a/n/ac/ax modes configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. The device also contains 2.4GHz WLAN, Bluetoth and BLE transmitters.

CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application IKgktJycLpiNBFqfd2sI+A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shenzhen Efercro Electronic Technology Co., Ltd.
Room 901, Block E, Building 1, Section 1, Chuangzhi Yuncheng, Liuxian Avenue, Xili Community
, Xili Street, Nanshan District, Shenzhen, 518126
China
  Date of Grant: 01/24/2025

Application Dated: 01/24/2025
 
Attention: Hongyan Wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AW9M-P6
Name of Grantee:  Shenzhen Efercro Electronic Technology Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Projector
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0303  
CC ND 15E 5260.0  -  5320.0 0.033  
CC ND 15E 5500.0  -  5700.0 0.0187  
CC 15E 5745.0  -  5825.0 0.0231  

Power listed is maximum average conducted output power. This device supports both 20 MHz and 40 MHz bandwidth modes as described in this filing. The product must be installed such that its antenna(s) can provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. Device is a client only device containing a 802.11a/n/ac/ax modes configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. The device also contains 2.4GHz WLAN, Bluetoth and BLE transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: