FCC ID 2AWKZ-QCNFA364AH
802.11a/b/g/n/ac + BT 4.1 M.2 2230 Type Card
by ENLI INCORPORATION
Grantee Code: 2AWKZ Product Code: QCNFA364AH
Latest application date: 2023-11-03
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2023-11-03 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2023-11-03 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2023-11-03 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: PPQ-WCBN808A Grant Date: 05/29/2023 | 2023-06-15 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: PPQ-WCBN808A Grant Date: 05/29/2023 | 2023-06-15 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: PPQ-WCBN808A Grant Date: 05/29/2023 | 2023-06-15 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2024-05-01 | PDF 3.6 MB |
| Internal Photos | Internal Photos | 2024-05-01 | PDF 4.6 MB |
| External Photos | External Photos | 2024-05-01 | PDF 1.7 MB |
| External Photos | External Photos | 2023-11-21 | PDF 157.4 KB |
| ID Label and Location | ID Label/Location Info | 2023-11-03 | PDF 189.3 KB |
| Label Sample and Label Location | ID Label/Location Info | 2023-06-15 | PDF 99 KB |
| Test Setup Photos_SAR | Test Setup Photos | 2024-05-01 | PDF 452.4 KB |
| Test Report_Antenna-1 | Test Report | 2023-11-03 | PDF 6 MB |
| Test Report_Antenna-2 | Test Report | 2023-11-03 | PDF 5.4 MB |
| Agent Designation Attestation | Attestation Statements | 2023-11-03 | PDF 334.2 KB |
| Covered Equipment Certification Attestation Letter | Attestation Statements | 2023-11-03 | PDF 137.9 KB |
| Attestation-Statements of part 2.911(d)(5) | Attestation Statements | 2023-06-15 | PDF 144.9 KB |
| Attestation-U.S. local Agent Letter of part 2.911(d)(7) rev | Attestation Statements | 2023-06-15 | PDF 157.3 KB |
| C2PC_Description of Change Letter | Cover Letter(s) | 2023-11-03 | PDF 158.2 KB |
| POA | Cover Letter(s) | 2023-11-03 | PDF 103.9 KB |
| STC Request Letter | Cover Letter(s) | 2023-11-03 | PDF 163.9 KB |
| Confidentiality request(Short term) | Cover Letter(s) | 2023-06-15 | PDF 150.4 KB |
| Cover Letter (Agent Authorization) | Cover Letter(s) | 2023-06-15 | PDF 157.3 KB |
| Cover Letter (Change ID Authorization) | Cover Letter(s) | 2023-06-15 | PDF 132.5 KB |
| Cover Letter (Request for Change ID) | Cover Letter(s) | 2023-06-15 | PDF 146.9 KB |
| SAR Report-1 | RF Exposure Info | 2023-11-03 | PDF 765 KB |
| SAR Report-2 | RF Exposure Info | 2023-11-03 | PDF 248.7 KB |
| SAR Report-3 | RF Exposure Info | 2023-11-03 | PDF 337.3 KB |
| SAR Report-4 | RF Exposure Info | 2023-11-03 | PDF 3.4 MB |
| SAR Report-5 | RF Exposure Info | 2023-11-03 | PDF 3 MB |
| SAR Report-6 | RF Exposure Info | 2023-11-03 | PDF 4.2 MB |
Application Information
| Application ID | xlFiVYImQTsiVDidvd0ggQ== |
|---|---|
| Final Action Date | 2023-11-03 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0029638590 |
| Model | QCNFA364AH |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | 802.11a/b/g/n/ac + BT 4.1 M.2 2230 Type Card |
| Responsible Party | Max Fan, maxfan@enlii.com  , 88624498311 |
| Test Firm | Hank Lee, Compliance Certification Services Inc. Wugu Lab., hank.lee@sgs.com  , 886-2-2299-9720 |
| TCB Email | vina.kerai@nemko.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 05/01/2024 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive change to adjust power on channel 159 using the minimum RF separation distance of 0.5cm and reduced power as described in this filing. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or tablet or apply to those under keyboard where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 0.5cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.79 W/kg and 0.82 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.79 W/Kg and 0.82 W/Kg respectively. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the portable configuration host of Advantech Computer, model: MIT-W102, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.93 W/kg and 1.39 W/kg, respectively. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| xlFiVYImQTsiVDidvd0ggQ== | 2023-11-03 | Class II permissive change or modification of presently authorized equipment |
| bWln0fANQ0/RwIR+2W8LMg== | 2023-11-03 | Class II permissive change or modification of presently authorized equipment |
| MYRoVailrfXkZmNppBZHlQ== | 2023-11-03 | Class II permissive change or modification of presently authorized equipment |
| pCkqO2nVNJZCWMx9jZybJw== | 2023-06-15 | Change in identification of presently authorized equipment. Original FCC ID: PPQ-WCBN808A Grant Date: 05/29/2023 |
| mBZSn+xE8EwhHgdQ6cYwsA== | 2023-06-15 | Change in identification of presently authorized equipment. Original FCC ID: PPQ-WCBN808A Grant Date: 05/29/2023 |
| 7rk18ivGAB2xcGGiB5JZpg== | 2023-06-15 | Change in identification of presently authorized equipment. Original FCC ID: PPQ-WCBN808A Grant Date: 05/29/2023 |
Equipment Authorization
Grants
TCB Grant - Application xlFiVYImQTsiVDidvd0ggQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, Inc. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 11/03/2023 Application Dated: 11/03/2023 |
| ENLI INCORPORATION |
| 4F., No. 42, Aly. 5, Ln. 12, Sec. 3, |
| Bade Rd., Songshan Dist. |
| TAIPEI, 10559 Taiwan |
| Attention: Max Fan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AWKZ-QCNFA364AH |
| Name of Grantee: | ENLI INCORPORATION |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g/n/ac + BT 4.1 M.2 2230 Type Card |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.114 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.112 | ||
| CC MO | 15E | 5500.0 - 5720.0 | 0.104 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.157 |
| Class II Permissive change to adjust power on channel 159 using the minimum RF separation distance of 0.5cm and reduced power as described in this filing. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or tablet or apply to those under keyboard where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 0.5cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.79 W/kg and 0.82 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.79 W/Kg and 0.82 W/Kg respectively. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the portable configuration host of Advantech Computer, model: MIT-W102, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.93 W/kg and 1.39 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application xlFiVYImQTsiVDidvd0ggQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ENLI INCORPORATION 4F., No. 42, Aly. 5, Ln. 12, Sec. 3, Bade Rd., Songshan Dist. TAIPEI, 10559 Taiwan |
Date of Grant: 11/03/2023 Application Dated: 11/03/2023 |
| Attention: Max Fan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AWKZ-QCNFA364AH |
| Name of Grantee: | ENLI INCORPORATION |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g/n/ac + BT 4.1 M.2 2230 Type Card |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.114 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.112 | ||
| CC MO | 15E | 5500.0 - 5720.0 | 0.104 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.157 |
| Class II Permissive change to adjust power on channel 159 using the minimum RF separation distance of 0.5cm and reduced power as described in this filing. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or tablet or apply to those under keyboard where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 0.5cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.79 W/kg and 0.82 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.79 W/Kg and 0.82 W/Kg respectively. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the portable configuration host of Advantech Computer, model: MIT-W102, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.93 W/kg and 1.39 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 06/15/2023 Application Dated: 06/15/2023 |
| ENLI INCORPORATION |
| 4F., No. 42, Aly. 5, Ln. 12, Sec. 3, |
| Bade Rd., Songshan Dist. |
| TAIPEI, 10559 Taiwan |
| Attention: Max Fan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AWKZ-QCNFA364AH |
| Name of Grantee: | ENLI INCORPORATION |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g/n/ac + BT 4.1 M.2 2230 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.114 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.112 | ||
| CC MO | 15E | 5500.0 - 5720.0 | 0.104 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.157 |
| Class II Permissive change to adjust power on channel 159 using the minimum RF separation distance of 0.5cm and reduced power as described in this filing. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or tablet or apply to those under keyboard where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 0.5cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.79 W/kg and 0.82 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.79 W/Kg and 0.82 W/Kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application pCkqO2nVNJZCWMx9jZybJw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ENLI INCORPORATION 4F., No. 42, Aly. 5, Ln. 12, Sec. 3, Bade Rd., Songshan Dist. TAIPEI, 10559 Taiwan |
Date of Grant: 06/15/2023 Application Dated: 06/15/2023 |
| Attention: Max Fan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AWKZ-QCNFA364AH |
| Name of Grantee: | ENLI INCORPORATION |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g/n/ac + BT 4.1 M.2 2230 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.114 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.112 | ||
| CC MO | 15E | 5500.0 - 5720.0 | 0.104 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.157 |
| Class II Permissive change to adjust power on channel 159 using the minimum RF separation distance of 0.5cm and reduced power as described in this filing. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or tablet or apply to those under keyboard where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 0.5cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.79 W/kg and 0.82 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.79 W/Kg and 0.82 W/Kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, Inc. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 11/03/2023 Application Dated: 11/02/2023 |
| ENLI INCORPORATION |
| 4F., No. 42, Aly. 5, Ln. 12, Sec. 3, |
| Bade Rd., Songshan Dist. |
| TAIPEI, 10559 Taiwan |
| Attention: Max Fan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AWKZ-QCNFA364AH |
| Name of Grantee: | ENLI INCORPORATION |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11a/b/g/n/ac + BT 4.1 M.2 2230 Type Card |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.015 |
| Class II Permissive change to increase the minimum RF separation distance to 0.5cm and reduced power as described in this filing. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or tablet or apply to those under keyboard where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 0.5cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value was < 0.1 W/Kg. The highest reported SAR value across all filings under this equipment code and FCC ID was <0.1 W/Kg. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the portable configuration host of Advantech Computer, model: MIT-W102, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are <0.10 W/kg and 1.39 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application MYRoVailrfXkZmNppBZHlQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ENLI INCORPORATION 4F., No. 42, Aly. 5, Ln. 12, Sec. 3, Bade Rd., Songshan Dist. TAIPEI, 10559 Taiwan |
Date of Grant: 11/03/2023 Application Dated: 11/02/2023 |
| Attention: Max Fan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AWKZ-QCNFA364AH |
| Name of Grantee: | ENLI INCORPORATION |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11a/b/g/n/ac + BT 4.1 M.2 2230 Type Card |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.015 |
| Class II Permissive change to increase the minimum RF separation distance to 0.5cm and reduced power as described in this filing. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or tablet or apply to those under keyboard where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 0.5cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value was < 0.1 W/Kg. The highest reported SAR value across all filings under this equipment code and FCC ID was <0.1 W/Kg. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the portable configuration host of Advantech Computer, model: MIT-W102, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are <0.10 W/kg and 1.39 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 06/15/2023 Application Dated: 06/15/2023 |
| ENLI INCORPORATION |
| 4F., No. 42, Aly. 5, Ln. 12, Sec. 3, |
| Bade Rd., Songshan Dist. |
| TAIPEI, 10559 Taiwan |
| Attention: Max Fan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AWKZ-QCNFA364AH |
| Name of Grantee: | ENLI INCORPORATION |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g/n/ac + BT 4.1 M.2 2230 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.002 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.51 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.423 |
| Class II Permissive change to increase the minimum RF separation distance to 0.5cm and reduced power as described in this filing. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or tablet or apply to those under keyboard where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 0.5cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.79 W/kg and 0.82 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.79 W/Kg and 0.82 W/Kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application mBZSn+xE8EwhHgdQ6cYwsA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ENLI INCORPORATION 4F., No. 42, Aly. 5, Ln. 12, Sec. 3, Bade Rd., Songshan Dist. TAIPEI, 10559 Taiwan |
Date of Grant: 06/15/2023 Application Dated: 06/15/2023 |
| Attention: Max Fan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AWKZ-QCNFA364AH |
| Name of Grantee: | ENLI INCORPORATION |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g/n/ac + BT 4.1 M.2 2230 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.002 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.51 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.423 |
| Class II Permissive change to increase the minimum RF separation distance to 0.5cm and reduced power as described in this filing. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or tablet or apply to those under keyboard where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 0.5cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.79 W/kg and 0.82 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.79 W/Kg and 0.82 W/Kg respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, Inc. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 11/03/2023 Application Dated: 11/03/2023 |
| ENLI INCORPORATION |
| 4F., No. 42, Aly. 5, Ln. 12, Sec. 3, |
| Bade Rd., Songshan Dist. |
| TAIPEI, 10559 Taiwan |
| Attention: Max Fan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AWKZ-QCNFA364AH |
| Name of Grantee: | ENLI INCORPORATION |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g/n/ac + BT 4.1 M.2 2230 Type Card |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.002 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.51 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.423 |
| Class II Permissive change to increase the minimum RF separation distance to 0.5cm and reduced power as described in this filing. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or tablet or apply to those under keyboard where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 0.5cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.79 W/kg and 0.82 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.79 W/Kg and 0.82 W/Kg respectively. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the portable configuration host of Advantech Computer, model: MIT-W102, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.70 W/kg and 0.95 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application bWln0fANQ0/RwIR+2W8LMg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ENLI INCORPORATION 4F., No. 42, Aly. 5, Ln. 12, Sec. 3, Bade Rd., Songshan Dist. TAIPEI, 10559 Taiwan |
Date of Grant: 11/03/2023 Application Dated: 11/03/2023 |
| Attention: Max Fan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AWKZ-QCNFA364AH |
| Name of Grantee: | ENLI INCORPORATION |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g/n/ac + BT 4.1 M.2 2230 Type Card |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.002 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.51 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.423 |
| Class II Permissive change to increase the minimum RF separation distance to 0.5cm and reduced power as described in this filing. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or tablet or apply to those under keyboard where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 0.5cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.79 W/kg and 0.82 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.79 W/Kg and 0.82 W/Kg respectively. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure in the portable configuration host of Advantech Computer, model: MIT-W102, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.70 W/kg and 0.95 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
North American EMC Certification Services Inc 24889 Ferguson Ave Maple Ridge, BC, Canada |
Date of Grant: 06/15/2023 Application Dated: 06/15/2023 |
| ENLI INCORPORATION |
| 4F., No. 42, Aly. 5, Ln. 12, Sec. 3, |
| Bade Rd., Songshan Dist. |
| TAIPEI, 10559 Taiwan |
| Attention: Max Fan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AWKZ-QCNFA364AH |
| Name of Grantee: | ENLI INCORPORATION |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11a/b/g/n/ac + BT 4.1 M.2 2230 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.015 |
| Class II Permissive change to increase the minimum RF separation distance to 0.5cm and reduced power as described in this filing. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or tablet or apply to those under keyboard where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 0.5cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value was < 0.1 W/Kg. The highest reported SAR value across all filings under this equipment code and FCC ID was <0.1 W/Kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 7rk18ivGAB2xcGGiB5JZpg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ENLI INCORPORATION 4F., No. 42, Aly. 5, Ln. 12, Sec. 3, Bade Rd., Songshan Dist. TAIPEI, 10559 Taiwan |
Date of Grant: 06/15/2023 Application Dated: 06/15/2023 |
| Attention: Max Fan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AWKZ-QCNFA364AH |
| Name of Grantee: | ENLI INCORPORATION |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11a/b/g/n/ac + BT 4.1 M.2 2230 Type Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.015 |
| Class II Permissive change to increase the minimum RF separation distance to 0.5cm and reduced power as described in this filing. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or tablet or apply to those under keyboard where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 0.5cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value was < 0.1 W/Kg. The highest reported SAR value across all filings under this equipment code and FCC ID was <0.1 W/Kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |