FCC ID 2AWKZ-QCNFA765
NIDApad
by ENLI INCORPORATION
Grantee Code: 2AWKZ Product Code: QCNFA765
Latest application date: 2023-12-01
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2023-12-01 |
| 5935-6415 MHz | Class II permissive change or modification of presently authorized equipment | 2023-12-01 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2023-12-01 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2023-12-01 |
| 5180-5250 MHz | Change in identification of presently authorized equipment. Original FCC ID: PPQ-WCBN814A Grant Date: 03/03/2022 | 2023-11-08 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: PPQ-WCBN814A Grant Date: 03/03/2022 | 2023-11-08 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: PPQ-WCBN814A Grant Date: 03/03/2022 | 2023-11-08 |
| 5935-6415 MHz | Change in identification of presently authorized equipment. Original FCC ID: PPQ-WCBN814A Grant Date: 03/03/2022 | 2023-11-08 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2023-12-01 | PDF 576.8 KB |
| Internal Photos | Internal Photos | 2023-12-01 | PDF 5.2 MB |
| External Photos | External Photos | 2024-05-06 | PDF 498.4 KB |
| External Photos | External Photos | 2023-12-01 | PDF 688.4 KB |
| Label Info and Location | ID Label/Location Info | 2023-12-01 | PDF 1.3 MB |
| Label Info and Location | Parts List/Tune Up Info | 2023-12-01 | PDF 1.3 MB |
| Label Info | ID Label/Location Info | 2023-11-08 | PDF 93.1 KB |
| SAR Report App A | Schematics | 2023-12-01 | PDF 1.1 MB |
| SAR Report App D TSUP | Test Setup Photos | 2023-12-01 | PDF 147.6 KB |
| SAR Report App H TSUP | Test Setup Photos | 2023-12-01 | PDF 174.5 KB |
| TSUP | Test Setup Photos | 2023-12-01 | PDF 866.8 KB |
| Antenna Specification | Test Report | 2023-12-01 | PDF 4 MB |
| Antenna Specification 2 | Test Report | 2023-12-01 | PDF 4 MB |
| Test Report | Test Report | 2023-12-01 | PDF 2 MB |
| Test Report BLE | Test Report | 2023-12-01 | PDF 2 MB |
| Test Report Colocated | Test Report | 2023-12-01 | PDF 1.9 MB |
| Test Report WiFi | Test Report | 2023-12-01 | PDF 3.5 MB |
| Test Report WiFi | Test Report | 2023-12-01 | PDF 4.7 MB |
| Test Report WiFi 2 | Test Report | 2023-12-01 | PDF 4.7 MB |
| Test Report WiFi 5G 1 | Test Report | 2023-12-01 | PDF 3.9 MB |
| Test Report WiFi 5G 2 | Test Report | 2023-12-01 | PDF 3.3 MB |
| Attestation Statements Part 2.911(d)(7) | Attestation Statements | 2023-12-01 | PDF 141.9 KB |
| Attstn Stmt Part 2.911(d)(5)(i)&(ii) | Attestation Statements | 2023-12-01 | PDF 169.7 KB |
| Device Attestation Letter | Cover Letter(s) | 2023-12-01 | PDF 226.8 KB |
| Attstn Stmt Part 2.911(d)(5)(i)&(ii) | Attestation Statements | 2023-11-08 | PDF 229.9 KB |
| Agent Authorization Letter | Cover Letter(s) | 2023-12-01 | PDF 296.8 KB |
| C2PC Letter | Cover Letter(s) | 2023-12-01 | PDF 173.8 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2023-12-01 | PDF 267.6 KB |
| Modular Approcal Request Letter | Cover Letter(s) | 2023-12-01 | PDF 141.3 KB |
| SDoC Letter | Cover Letter(s) | 2023-12-01 | PDF 168.4 KB |
| Change In FCC ID Authrization (LITE-ON) | Cover Letter(s) | 2023-11-08 | PDF 461.7 KB |
| Change In FCC ID Request | Cover Letter(s) | 2023-11-08 | PDF 188 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2023-11-08 | PDF 176.8 KB |
| Modular Approval Letter | Cover Letter(s) | 2023-11-08 | PDF 174.7 KB |
| PoA Letter | Cover Letter(s) | 2023-11-08 | PDF 179.6 KB |
| SAR Report | RF Exposure Info | 2023-12-01 | PDF 1.7 MB |
| SAR Report App A | RF Exposure Info | 2023-12-01 | PDF 1.1 MB |
| SAR Report App B | RF Exposure Info | 2023-12-01 | PDF 939.8 KB |
| SAR Report App C | RF Exposure Info | 2023-12-01 | PDF 3.4 MB |
| SAR Report App D | RF Exposure Info | 2023-12-01 | PDF 147.6 KB |
| SAR Report App E | RF Exposure Info | 2023-12-01 | PDF 587.7 KB |
| SAR Report App F | RF Exposure Info | 2023-12-01 | PDF 599.4 KB |
| SAR Report App G | RF Exposure Info | 2023-12-01 | PDF 2.7 MB |
| SAR Report App H | RF Exposure Info | 2023-12-01 | PDF 174.5 KB |
| Block Diagram Metadata only | Block Diagram | PDF 103 KB | |
| Block Diagram Module Metadata only | Block Diagram | PDF 119.8 KB | |
| Schematic Circuit Diagram Metadata only | Schematics | PDF 1.6 MB | |
| Schematic Diagram Module Metadata only | Schematics | PDF 3.8 MB | |
| Operational Description Metadata only | Operational Description | PDF 1,019.1 KB | |
| Operational Description 2 Metadata only | Operational Description | PDF 38 KB | |
| 5G Software Security Metadata only | SDR Software/Security Inf | PDF 208.1 KB | |
| Op Desc Software Security Metadata only | SDR Software/Security Inf | PDF 211.1 KB | |
| SDR Security Description Metadata only | SDR Software/Security Inf | PDF 124.2 KB | |
| BOM Metadata only | Parts List/Tune Up Info | PDF 1,023.2 KB | |
| BOM Module Metadata only | Parts List/Tune Up Info | PDF 553.1 KB |
Application Information
| Application ID | t398z9E+W9isL1fFEM6inw== |
|---|---|
| Final Action Date | 2023-12-01 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0029638590 |
| Model | QCNFA765 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | NIDApad |
| Responsible Party | Max Fan, maxfan@enlii.com  , 88624498311 |
| Test Firm | Ivan Hsieh, TUV Rheinland Taiwan Ltd. Taipei Testing Lab., IvanM.Hsieh@tuv.com  , +886 2-2172-7000 |
| TCB Email | tei@timcoengr.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Power listed is the maximum combined conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change: Authorized portable use when integrated into the ONYX Healthcare, Inc. Mobile Medical Assistant, model NIDApad. The highest reported SAR values for body and simultaneous transmission use conditions are 0.63 W/kg and 0.77 W/kg, respectively. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| t398z9E+W9isL1fFEM6inw== | 2023-12-01 | Class II permissive change or modification of presently authorized equipment |
| ZFapNeWlU8GJrscwRba4Gg== | 2023-12-01 | Class II permissive change or modification of presently authorized equipment |
| 7ObKm38BJExnVBH/pn6lsQ== | 2023-12-01 | Class II permissive change or modification of presently authorized equipment |
| 2QtjGT6LbUiKG+Six2vpYQ== | 2023-12-01 | Class II permissive change or modification of presently authorized equipment |
| rYC8dxH0Z0B3X6XXzodtCQ== | 2023-11-08 | Change in identification of presently authorized equipment. Original FCC ID: PPQ-WCBN814A Grant Date: 03/03/2022 |
| l1agmZXKsuTGmSZv70paOw== | 2023-11-08 | Change in identification of presently authorized equipment. Original FCC ID: PPQ-WCBN814A Grant Date: 03/03/2022 |
| c0gJ0wksT+vK9jG3/mxNgw== | 2023-11-08 | Change in identification of presently authorized equipment. Original FCC ID: PPQ-WCBN814A Grant Date: 03/03/2022 |
| RHYRtfbj5zeleN8Nf5CGGA== | 2023-11-08 | Change in identification of presently authorized equipment. Original FCC ID: PPQ-WCBN814A Grant Date: 03/03/2022 |
| /hdx7tdGdZHzod+KZNilKg== | 2023-11-08 | Change in identification of presently authorized equipment. Original FCC ID: PPQ-WCBN814A Grant Date: 03/03/2022 |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 15B | CC | ||
| 2402-2480 MHz | 0.011 | 15C | CC |
| 2402-2480 MHz | 0.0290000 | 15C | CC |
| 2412-2472 MHz | 0.756 | 15C | CC, MO |
| 2412-2462 MHz | 0.756 | 15C | CC, MO |
| 5180-5250 MHz | 0.154 | 15E | CC, MO |
| 5180-5240 MHz | 0.154 | 15E | CC, MO |
| 5250-5320 MHz | 0.154 | 15E | CC, MO |
| 5500-5720 MHz | 0.152 | 15E | CC, MO |
| 5745-5825 MHz | 0.152 | 15E | CC, MO |
| 5815 MHz | 0.303 | 15E | CC, EP, MO |
| 5835 MHz | 0.439 | 15E | CC, EP, MO |
| 5845 MHz | 0.362 | 15E | CC, EP, MO |
| 5855 MHz | 0.392 | 15E | CC, EP, MO |
| 5865-5885 MHz | 0.442 | 15E | CC, EP, MO |
| 5865 MHz | 0.442 | 15E | CC, EP, MO |
| 5935-6415 MHz | 0.993 | 15E | CC, EP, MO |
| 5935-7115 MHz | 0.156 | 15E | CC, EP, MO |
| 6535-6855 MHz | 0.993 | 15E | CC, EP, MO |
Grants
TCB Grant - Application ZFapNeWlU8GJrscwRba4Gg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 12/01/2023 Application Dated: 12/01/2023 |
| ENLI INCORPORATION |
| 4F., No. 42, Aly. 5, Ln. 12, Sec. 3, |
| Bade Rd., Songshan Dist. |
| TAIPEI, 10559 Taiwan |
| Attention: Max Fan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AWKZ-QCNFA765 |
| Name of Grantee: | ENLI INCORPORATION |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | NIDApad |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5935.0 - 6415.0 | 0.993 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.993 | ||
| CC EP MO | 15E | 5935.0 - 7115.0 | 0.156 |
| Single Modular Approval. Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. For 5.925-7.125GHz band operation, only the PIFA antenna (Model: 260-25083 with maximum 5.16 dBi gain in 6 GHz band) and Monopole antenna (Model: 260-25084 with maximum 4.81 dBi gain in 6 GHz band) can be used with this approval. Device must compliant indoor restrictions when connected to indoor low power AP. Class II Permissive Change: Authorized portable use when integrated into the ONYX Healthcare, Inc. Mobile Medical Assistant, model NIDApad. The highest reported SAR values for body and simultaneous transmission use conditions are < 0.10 W/kg and 1.30 W/kg, respectively. The highest reported power density is 2.67 W/m2. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application ZFapNeWlU8GJrscwRba4Gg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ENLI INCORPORATION 4F., No. 42, Aly. 5, Ln. 12, Sec. 3, Bade Rd., Songshan Dist. TAIPEI, 10559 Taiwan |
Date of Grant: 12/01/2023 Application Dated: 12/01/2023 |
| Attention: Max Fan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AWKZ-QCNFA765 |
| Name of Grantee: | ENLI INCORPORATION |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | NIDApad |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5935.0 - 6415.0 | 0.993 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.993 | ||
| CC EP MO | 15E | 5935.0 - 7115.0 | 0.156 |
| Single Modular Approval. Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. For 5.925-7.125GHz band operation, only the PIFA antenna (Model: 260-25083 with maximum 5.16 dBi gain in 6 GHz band) and Monopole antenna (Model: 260-25084 with maximum 4.81 dBi gain in 6 GHz band) can be used with this approval. Device must compliant indoor restrictions when connected to indoor low power AP. Class II Permissive Change: Authorized portable use when integrated into the ONYX Healthcare, Inc. Mobile Medical Assistant, model NIDApad. The highest reported SAR values for body and simultaneous transmission use conditions are < 0.10 W/kg and 1.30 W/kg, respectively. The highest reported power density is 2.67 W/m2. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 12/01/2023 Application Dated: 12/01/2023 |
| ENLI INCORPORATION |
| 4F., No. 42, Aly. 5, Ln. 12, Sec. 3, |
| Bade Rd., Songshan Dist. |
| TAIPEI, 10559 Taiwan |
| Attention: Max Fan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AWKZ-QCNFA765 |
| Name of Grantee: | ENLI INCORPORATION |
| Equipment Class: | Digital Transmission System |
| Notes: | NIDApad |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.011 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.756 |
| Single Modular Approval. Power listed is the maximum combined conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change: Authorized portable use when integrated into the ONYX Healthcare, Inc. Mobile Medical Assistant, model NIDApad. The highest reported SAR values for body and simultaneous transmission use conditions are 0.63 W/kg and 0.77 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application t398z9E+W9isL1fFEM6inw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ENLI INCORPORATION 4F., No. 42, Aly. 5, Ln. 12, Sec. 3, Bade Rd., Songshan Dist. TAIPEI, 10559 Taiwan |
Date of Grant: 12/01/2023 Application Dated: 12/01/2023 |
| Attention: Max Fan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AWKZ-QCNFA765 |
| Name of Grantee: | ENLI INCORPORATION |
| Equipment Class: | Digital Transmission System |
| Notes: | NIDApad |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.011 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.756 |
| Single Modular Approval. Power listed is the maximum combined conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change: Authorized portable use when integrated into the ONYX Healthcare, Inc. Mobile Medical Assistant, model NIDApad. The highest reported SAR values for body and simultaneous transmission use conditions are 0.63 W/kg and 0.77 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 11/08/2023 Application Dated: 10/26/2023 |
| ENLI INCORPORATION |
| 4F., No. 42, Aly. 5, Ln. 12, Sec. 3, |
| Bade Rd., Songshan Dist. |
| TAIPEI, 10559 Taiwan |
| Attention: Max Fan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AWKZ-QCNFA765 |
| Name of Grantee: | ENLI INCORPORATION |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wi-Fi 6E BT 5.2 M.2 2230 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5250.0 | 0.154 | ||
| CC MO | 15E | 5250.0 - 5320.0 | 0.154 | ||
| CC MO | 15E | 5500.0 - 5720.0 | 0.152 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.152 | ||
| CC EP MO | 15E | 5865.0 - 5885.0 | 0.442 | ||
| CC EP MO | 15E | 5845.0 - 5845.0 | 0.362 | ||
| CC EP MO | 15E | 5835.0 - 5835.0 | 0.439 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.392 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.303 |
| Single Modular Approval. U-NII-1 through U-NII-3 Power listed is the maximum combined conducted output power, U-NII-4 and U-NII -3 & -4 span channels Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application rYC8dxH0Z0B3X6XXzodtCQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ENLI INCORPORATION 4F., No. 42, Aly. 5, Ln. 12, Sec. 3, Bade Rd., Songshan Dist. TAIPEI, 10559 Taiwan |
Date of Grant: 11/08/2023 Application Dated: 10/26/2023 |
| Attention: Max Fan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AWKZ-QCNFA765 |
| Name of Grantee: | ENLI INCORPORATION |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wi-Fi 6E BT 5.2 M.2 2230 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5250.0 | 0.154 | ||
| CC MO | 15E | 5250.0 - 5320.0 | 0.154 | ||
| CC MO | 15E | 5500.0 - 5720.0 | 0.152 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.152 | ||
| CC EP MO | 15E | 5865.0 - 5885.0 | 0.442 | ||
| CC EP MO | 15E | 5845.0 - 5845.0 | 0.362 | ||
| CC EP MO | 15E | 5835.0 - 5835.0 | 0.439 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.392 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.303 |
| Single Modular Approval. U-NII-1 through U-NII-3 Power listed is the maximum combined conducted output power, U-NII-4 and U-NII -3 & -4 span channels Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 11/08/2023 Application Dated: 10/26/2023 |
| ENLI INCORPORATION |
| 4F., No. 42, Aly. 5, Ln. 12, Sec. 3, |
| Bade Rd., Songshan Dist. |
| TAIPEI, 10559 Taiwan |
| Attention: Max Fan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AWKZ-QCNFA765 |
| Name of Grantee: | ENLI INCORPORATION |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | W-Fi 6E BT 5.2 M.2 2230 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5935.0 - 6415.0 | 0.993 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.993 | ||
| CC EP MO | 15E | 5935.0 - 7115.0 | 0.156 |
| Single Modular Approval. Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. For 5.925-7.125GHz band operation, only the PIFA antenna (Model: 260-25083 with maximum 5.16 dBi gain in 6 GHz band) and Monopole antenna (Model: 260-25084 with maximum 4.81 dBi gain in 6 GHz band) can be used with this approval. Device must compliant indoor restrictions when connected to indoor low power AP. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application RHYRtfbj5zeleN8Nf5CGGA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ENLI INCORPORATION 4F., No. 42, Aly. 5, Ln. 12, Sec. 3, Bade Rd., Songshan Dist. TAIPEI, 10559 Taiwan |
Date of Grant: 11/08/2023 Application Dated: 10/26/2023 |
| Attention: Max Fan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AWKZ-QCNFA765 |
| Name of Grantee: | ENLI INCORPORATION |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | W-Fi 6E BT 5.2 M.2 2230 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5935.0 - 6415.0 | 0.993 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.993 | ||
| CC EP MO | 15E | 5935.0 - 7115.0 | 0.156 |
| Single Modular Approval. Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. For 5.925-7.125GHz band operation, only the PIFA antenna (Model: 260-25083 with maximum 5.16 dBi gain in 6 GHz band) and Monopole antenna (Model: 260-25084 with maximum 4.81 dBi gain in 6 GHz band) can be used with this approval. Device must compliant indoor restrictions when connected to indoor low power AP. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 11/08/2023 Application Dated: 10/26/2023 |
| ENLI INCORPORATION |
| 4F., No. 42, Aly. 5, Ln. 12, Sec. 3, |
| Bade Rd., Songshan Dist. |
| TAIPEI, 10559 Taiwan |
| Attention: Max Fan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AWKZ-QCNFA765 |
| Name of Grantee: | ENLI INCORPORATION |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wi-Fi 6E BT 5.2 M.2 2230 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.029 |
| Single Modular Approval. Power listed is the maximum conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application l1agmZXKsuTGmSZv70paOw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ENLI INCORPORATION 4F., No. 42, Aly. 5, Ln. 12, Sec. 3, Bade Rd., Songshan Dist. TAIPEI, 10559 Taiwan |
Date of Grant: 11/08/2023 Application Dated: 10/26/2023 |
| Attention: Max Fan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AWKZ-QCNFA765 |
| Name of Grantee: | ENLI INCORPORATION |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wi-Fi 6E BT 5.2 M.2 2230 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.029 |
| Single Modular Approval. Power listed is the maximum conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 11/08/2023 Application Dated: 10/26/2023 |
| ENLI INCORPORATION |
| 4F., No. 42, Aly. 5, Ln. 12, Sec. 3, |
| Bade Rd., Songshan Dist. |
| TAIPEI, 10559 Taiwan |
| Attention: Max Fan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AWKZ-QCNFA765 |
| Name of Grantee: | ENLI INCORPORATION |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi 6E BT 5.2 M.2 2230 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.011 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.756 |
| Single Modular Approval. Power listed is the maximum combined conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application c0gJ0wksT+vK9jG3/mxNgw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ENLI INCORPORATION 4F., No. 42, Aly. 5, Ln. 12, Sec. 3, Bade Rd., Songshan Dist. TAIPEI, 10559 Taiwan |
Date of Grant: 11/08/2023 Application Dated: 10/26/2023 |
| Attention: Max Fan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AWKZ-QCNFA765 |
| Name of Grantee: | ENLI INCORPORATION |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi 6E BT 5.2 M.2 2230 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.011 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.756 |
| Single Modular Approval. Power listed is the maximum combined conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 12/01/2023 Application Dated: 12/01/2023 |
| ENLI INCORPORATION |
| 4F., No. 42, Aly. 5, Ln. 12, Sec. 3, |
| Bade Rd., Songshan Dist. |
| TAIPEI, 10559 Taiwan |
| Attention: Max Fan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AWKZ-QCNFA765 |
| Name of Grantee: | ENLI INCORPORATION |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | NIDApad |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.154 | ||
| CC MO | 15E | 5250.0 - 5320.0 | 0.154 | ||
| CC MO | 15E | 5500.0 - 5720.0 | 0.152 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.152 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.303 | ||
| CC EP MO | 15E | 5835.0 - 5835.0 | 0.439 | ||
| CC EP MO | 15E | 5845.0 - 5845.0 | 0.362 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.392 | ||
| CC EP MO | 15E | 5865.0 - 5865.0 | 0.442 |
| Single Modular Approval. U-NII-1 through U-NII-3 Power listed is the maximum combined conducted output power, U-NII-4 and U-NII -3 & -4 span channels Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. Class II Permissive Change: Authorized portable use when integrated into the ONYX Healthcare, Inc. Mobile Medical Assistant, model NIDApad. The highest reported SAR values for body and simultaneous transmission use conditions are 0.66 W/kg and 0.77 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 7ObKm38BJExnVBH/pn6lsQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ENLI INCORPORATION 4F., No. 42, Aly. 5, Ln. 12, Sec. 3, Bade Rd., Songshan Dist. TAIPEI, 10559 Taiwan |
Date of Grant: 12/01/2023 Application Dated: 12/01/2023 |
| Attention: Max Fan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AWKZ-QCNFA765 |
| Name of Grantee: | ENLI INCORPORATION |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | NIDApad |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.154 | ||
| CC MO | 15E | 5250.0 - 5320.0 | 0.154 | ||
| CC MO | 15E | 5500.0 - 5720.0 | 0.152 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.152 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.303 | ||
| CC EP MO | 15E | 5835.0 - 5835.0 | 0.439 | ||
| CC EP MO | 15E | 5845.0 - 5845.0 | 0.362 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.392 | ||
| CC EP MO | 15E | 5865.0 - 5865.0 | 0.442 |
| Single Modular Approval. U-NII-1 through U-NII-3 Power listed is the maximum combined conducted output power, U-NII-4 and U-NII -3 & -4 span channels Power listed is the EIRP. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. Class II Permissive Change: Authorized portable use when integrated into the ONYX Healthcare, Inc. Mobile Medical Assistant, model NIDApad. The highest reported SAR values for body and simultaneous transmission use conditions are 0.66 W/kg and 0.77 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 12/01/2023 Application Dated: 12/01/2023 |
| ENLI INCORPORATION |
| 4F., No. 42, Aly. 5, Ln. 12, Sec. 3, |
| Bade Rd., Songshan Dist. |
| TAIPEI, 10559 Taiwan |
| Attention: Max Fan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AWKZ-QCNFA765 |
| Name of Grantee: | ENLI INCORPORATION |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | NIDApad |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.029 |
| Single Modular Approval. Power listed is the maximum conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive Change: Authorized portable use when integrated into the ONYX Healthcare, Inc. Mobile Medical Assistant, model NIDApad. The highest reported SAR values for body and simultaneous transmission use conditions are 0.11 W/kg and 0.77 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 2QtjGT6LbUiKG+Six2vpYQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ENLI INCORPORATION 4F., No. 42, Aly. 5, Ln. 12, Sec. 3, Bade Rd., Songshan Dist. TAIPEI, 10559 Taiwan |
Date of Grant: 12/01/2023 Application Dated: 12/01/2023 |
| Attention: Max Fan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AWKZ-QCNFA765 |
| Name of Grantee: | ENLI INCORPORATION |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | NIDApad |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.029 |
| Single Modular Approval. Power listed is the maximum conducted output power. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive Change: Authorized portable use when integrated into the ONYX Healthcare, Inc. Mobile Medical Assistant, model NIDApad. The highest reported SAR values for body and simultaneous transmission use conditions are 0.11 W/kg and 0.77 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 11/08/2023 Application Dated: 10/26/2023 |
| ENLI INCORPORATION |
| 4F., No. 42, Aly. 5, Ln. 12, Sec. 3, |
| Bade Rd., Songshan Dist. |
| TAIPEI, 10559 Taiwan |
| Attention: Max Fan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AWKZ-QCNFA765 |
| Name of Grantee: | ENLI INCORPORATION |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Wi-Fi 6E BT 5.2 M.2 2230 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application /hdx7tdGdZHzod+KZNilKg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ENLI INCORPORATION 4F., No. 42, Aly. 5, Ln. 12, Sec. 3, Bade Rd., Songshan Dist. TAIPEI, 10559 Taiwan |
Date of Grant: 11/08/2023 Application Dated: 10/26/2023 |
| Attention: Max Fan |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AWKZ-QCNFA765 |
| Name of Grantee: | ENLI INCORPORATION |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Wi-Fi 6E BT 5.2 M.2 2230 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |