FCC ID 2AWNGFT101V40

10.1 Inch Embedded Touch PC

by Faytech Tech.Co., Ltd.

Grantee Code: 2AWNG   Product Code: FT101V40
Latest application date: 2021-04-26

FCC ID Device Details

FCC ID2AWNGFT101V40
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AWNG
Product CodeFT101V40
Applicant BusinessFaytech Tech.Co., Ltd. 🇨🇳
Related Domains faytech.com ntek.org.cn
Equipment Class10.1 Inch Embedded Touch PC
Test FirmShenzhen NTEK Testing Technology Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2021-04-26
2402-2480 MHzOriginal Equipment2021-04-26

Exhibits

DocumentTypeAvailableFile
User manualUsers Manual2021-10-12PDF 3.6 MB
Internal photosInternal Photos2021-10-12PDF 1.1 MB
External photosExternal Photos2021-10-12PDF 1 MB
ID label and locationID Label/Location Info2021-04-26PDF 908.4 KB
Test setup photosTest Setup Photos2021-10-12PDF 310.1 KB
Test reportsTest Report2021-04-26PDF 3.2 MB
Test reportsTest Report2021-04-26PDF 3.3 MB
ConfidentialityCover Letter(s)2021-04-26PDF 821.1 KB
Letter AuthorizationCover Letter(s)2021-04-26PDF 50.2 KB
RF ExposureRF Exposure Info2021-04-26PDF 243.6 KB
Block Diagram Metadata onlyBlock DiagramPDF 448.7 KB
Schematics Metadata onlySchematicsPDF 1.4 MB
Operational Description Metadata onlyOperational DescriptionPDF 380.3 KB

Application Information

Application IDj6Vsqf49zLhB2bcJMmie4Q==
Final Action Date2021-04-26
Application PurposeOriginal Equipment
Applicant FRN0029665809
ModelFT101V40
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device Description10.1 Inch Embedded Touch PC
Responsible Partyyan. guo, yan.guo@faytech.com , 0755-89580612
Technical ContactAlex Li, Shenzhen NTEK Testing Technology Co., Ltd., alex.li@ntek.org.cn , 86-755-6115 6588
Non-Technical ContactAlex Li, Shenzhen NTEK Testing Technology Co., Ltd., alex.li@ntek.org.cn , 86-755-6115 6588
Test FirmAlex Li, Shenzhen NTEK Testing Technology Co., Ltd., certification@ntek.org.cn , +86-755-6115-9384
TCB Emailelabscert@applus.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date10/12/2021
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is maximum conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
j6Vsqf49zLhB2bcJMmie4Q==2021-04-26Original Equipment
bYaMulW20Fp7OemjEA56AA==2021-04-26Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.001011015CCC
2402-2480 MHz0.0023915CCC
2412-2462 MHz0.01782415CCC

Grants

TCB Grant - Application j6Vsqf49zLhB2bcJMmie4Q==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  LGAI Technological Center S.A. (APPLUS)
Ronda de la Font del Carme, s/n <BR>P.O. Box 08193,
Barcelona,
Spain
Date of Grant: 04/26/2021

Application Dated: 04/25/2021
Faytech Tech.Co., Ltd.
Flr 3, Bld D, Phase 2, Hongmen Industry Park,
No.399, Jihua Road, Shuijing,District Longgang,
Shenzhen,,
China
 
Attention: yan. guo

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AWNGFT101V40
Name of Grantee:  Faytech Tech.Co., Ltd.
Equipment Class: Digital Transmission System
Notes: 10.1 Inch Embedded Touch PC
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00239  
CC 15C 2412.0  -  2462.0 0.017824  

Output power listed is maximum conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application j6Vsqf49zLhB2bcJMmie4Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Faytech Tech.Co., Ltd.
Flr 3, Bld D, Phase 2, Hongmen Industry Park, No.399, Jihua Road, Shuijing,District Longgang,
Shenzhen,,
China
  Date of Grant: 04/26/2021

Application Dated: 04/25/2021
 
Attention: yan. guo

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AWNGFT101V40
Name of Grantee:  Faytech Tech.Co., Ltd.
Equipment Class: Digital Transmission System
Notes: 10.1 Inch Embedded Touch PC
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00239  
CC 15C 2412.0  -  2462.0 0.017824  

Output power listed is maximum conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application bYaMulW20Fp7OemjEA56AA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  LGAI Technological Center S.A. (APPLUS)
Ronda de la Font del Carme, s/n <BR>P.O. Box 08193,
Barcelona,
Spain
Date of Grant: 04/26/2021

Application Dated: 04/25/2021
Faytech Tech.Co., Ltd.
Flr 3, Bld D, Phase 2, Hongmen Industry Park,
No.399, Jihua Road, Shuijing,District Longgang,
Shenzhen,,
China
 
Attention: yan. guo

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AWNGFT101V40
Name of Grantee:  Faytech Tech.Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 10.1 Inch Embedded Touch PC
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.001011  

Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application bYaMulW20Fp7OemjEA56AA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Faytech Tech.Co., Ltd.
Flr 3, Bld D, Phase 2, Hongmen Industry Park, No.399, Jihua Road, Shuijing,District Longgang,
Shenzhen,,
China
  Date of Grant: 04/26/2021

Application Dated: 04/25/2021
 
Attention: yan. guo

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AWNGFT101V40
Name of Grantee:  Faytech Tech.Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 10.1 Inch Embedded Touch PC
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.001011  

Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: