FCC ID 2AWVMPG11
RF Module
by PIXXGEN Corporation
Grantee Code: 2AWVM Product Code: PG11
Latest application date: 2020-09-17
FCC ID Device Details
| FCC ID | 2AWVMPG11 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AWVM |
| Product Code | PG11 |
| Applicant Business | PIXXGEN Corporation 🇰🇷 |
| Related Domains |  pixxgen.com |
| Equipment Class | RF Module |
| Test Firm | KES Co., Ltd |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Original Equipment | 2020-09-17 |
| 5180-5240 MHz | Original Equipment | 2020-09-17 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2021-03-16 | PDF 1 MB |
| Internal Photos | Internal Photos | 2021-03-16 | PDF 186.7 KB |
| External Photos | External Photos | 2021-03-16 | PDF 452 KB |
| Label Info | ID Label/Location Info | 2020-09-17 | PDF 98.3 KB |
| Label info | ID Label/Location Info | 2020-09-17 | PDF 98.3 KB |
| Tsup 15.247 | Test Setup Photos | 2021-03-16 | PDF 534.5 KB |
| Tsup 15.407 | Test Setup Photos | 2021-03-16 | PDF 534.5 KB |
| Test Rpt 15.247 | Test Report | 2020-09-17 | PDF 2.3 MB |
| Test Rpt 15.407 | Test Report | 2020-09-17 | PDF 2.5 MB |
| Wifi Attestation Letter | Cover Letter(s) | 2020-09-17 | PDF 12 KB |
| Ad Hoc Letter | Cover Letter(s) | 2020-09-17 | PDF 9.7 KB |
| Ad-Hoc letter | Cover Letter(s) | 2020-09-17 | PDF 9.7 KB |
| Confidentiality Letter | Cover Letter(s) | 2020-09-17 | PDF 15.6 KB |
| Confidentiality letter | Cover Letter(s) | 2020-09-17 | PDF 15.6 KB |
| Modular Approval Letter | Cover Letter(s) | 2020-09-17 | PDF 11.5 KB |
| Module Approval letter | Cover Letter(s) | 2020-09-17 | PDF 11.5 KB |
| POA Letter | Cover Letter(s) | 2020-09-17 | PDF 13.7 KB |
| Prof Install Letter | Cover Letter(s) | 2020-09-17 | PDF 13.1 KB |
| Prof Install letter | Cover Letter(s) | 2020-09-17 | PDF 13.1 KB |
| RF Exp | RF Exposure Info | 2020-09-17 | PDF 76.4 KB |
| Block Diagram Metadata only | Block Diagram | PDF 168.4 KB | |
| Schematics Metadata only | Schematics | PDF 51.5 KB | |
| Op Desc Ant spec Dipole Metadata only | Operational Description | PDF 3.3 MB | |
| Op Desc Ant spec PCB Metadata only | Operational Description | PDF 600.1 KB | |
| Op Desc ant connector Metadata only | Operational Description | PDF 264.2 KB | |
| Operational Description Metadata only | Operational Description | PDF 92.2 KB | |
| Software Security Op Desc Metadata only | SDR Software/Security Inf | PDF 113.7 KB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 364.8 KB |
Application Information
| Application ID | KjfgO9i3sb2JSnN4vqM27Q== |
|---|---|
| Final Action Date | 2020-09-17 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0029748795 |
| Model | PG11 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | RF Module |
| Responsible Party | JongMyung Shin, Deputy General Manager, qmqc@pixxgen.com , 82-70-4846-8891 |
| Test Firm | Insung Ryu, KES Co., Ltd, kes@kes.co.kr  , 82-31-425-6200 |
| TCB Email | TEI@TIMCOENGR.COM  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 03/16/2021 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed and operated so as to meet the RF exposure compliance separation distance of 20 cm, and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 20 MHz modes. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| KjfgO9i3sb2JSnN4vqM27Q== | 2020-09-17 | Original Equipment |
| CpzzuK/9Ev2UUC964dz+jA== | 2020-09-17 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application KjfgO9i3sb2JSnN4vqM27Q==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 09/17/2020 Application Dated: 09/17/2020 |
| PIXXGEN Corporation |
| 5F, SMART BAY, 123, Beolmal-ro, Dongna-gu |
| Anyang-si, 14065 South Korea |
| Attention: JongMyung Shin , Deputy General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AWVMPG11 |
| Name of Grantee: | PIXXGEN Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | RF Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.05433 |
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed and operated so as to meet the RF exposure compliance separation distance of 20 cm, and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 20 MHz modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application KjfgO9i3sb2JSnN4vqM27Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
PIXXGEN Corporation 5F, SMART BAY, 123, Beolmal-ro, Dongna-gu Anyang-si, 14065 South Korea |
Date of Grant: 09/17/2020 Application Dated: 09/17/2020 |
| Attention: JongMyung Shin , Deputy General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AWVMPG11 |
| Name of Grantee: | PIXXGEN Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | RF Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.05433 |
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed and operated so as to meet the RF exposure compliance separation distance of 20 cm, and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 20 MHz modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 09/17/2020 Application Dated: 09/17/2020 |
| PIXXGEN Corporation |
| 5F, SMART BAY, 123, Beolmal-ro, Dongna-gu |
| Anyang-si, 14065 South Korea |
| Attention: JongMyung Shin , Deputy General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AWVMPG11 |
| Name of Grantee: | PIXXGEN Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | RF Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.00733 |
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed and operated so as to meet the RF exposure compliance separation distance of 20 cm, and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 20 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application CpzzuK/9Ev2UUC964dz+jA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
PIXXGEN Corporation 5F, SMART BAY, 123, Beolmal-ro, Dongna-gu Anyang-si, 14065 South Korea |
Date of Grant: 09/17/2020 Application Dated: 09/17/2020 |
| Attention: JongMyung Shin , Deputy General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AWVMPG11 |
| Name of Grantee: | PIXXGEN Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | RF Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.00733 |
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed and operated so as to meet the RF exposure compliance separation distance of 20 cm, and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 20 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |