FCC ID 2AWY6-ELRT8733BUT
WLAN 11a/b/g/n 1T1R + BT5.2 module
by EXPRESS LUCK INDUSTRIAL (SHENZHEN) LIMITED
Grantee Code: 2AWY6 Product Code: ELRT8733BUT
Latest application date: 2025-01-17
FCC ID Device Details
| FCC ID | 2AWY6-ELRT8733BUT |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AWY6 |
| Product Code | ELRT8733BUT |
| Applicant Business | EXPRESS LUCK INDUSTRIAL (SHENZHEN) LIMITED 🇨🇳 |
| Related Domains |  caixun.net.cn |
| Equipment Class | WLAN 11a/b/g/n 1T1R + BT5.2 module |
| Test Firm | Shenzhen BCTC Testing Co., Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Original Equipment | 2025-01-17 |
| 5180-5240 MHz | Original Equipment | 2025-01-17 |
| 2402-2480 MHz | Original Equipment | 2025-01-17 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2025-03-02 | PDF 654.6 KB |
| User manual | Users Manual | 2025-03-02 | PDF 654.6 KB |
| INTERNAL PHOTOS | Internal Photos | 2025-01-17 | PDF 278.9 KB |
| Internal Photos | Internal Photos | 2025-01-17 | PDF 278.9 KB |
| Internal photos | Internal Photos | 2025-01-17 | PDF 278.9 KB |
| EXTERNAL PHOTOS | External Photos | 2025-01-17 | PDF 589.5 KB |
| External photos | External Photos | 2025-01-17 | PDF 589.5 KB |
| Label and Location | ID Label/Location Info | 2025-01-17 | PDF 127.2 KB |
| Label and label location | ID Label/Location Info | 2025-01-17 | PDF 127.2 KB |
| Test Setup | Test Setup Photos | 2025-01-17 | PDF 794.4 KB |
| Test Setup Photos | Test Setup Photos | 2025-01-17 | PDF 794.4 KB |
| Test photos | Test Setup Photos | 2025-01-17 | PDF 794.4 KB |
| ANT | Test Report | 2025-01-17 | PDF 1.6 MB |
| FCC ID BLE Report | Test Report | 2025-01-17 | PDF 3.9 MB |
| WFT FCC ID DFS Report | Test Report | 2025-01-17 | PDF 1.2 MB |
| WFTFCCID2.4GReport Part1 | Test Report | 2025-01-17 | PDF 4.5 MB |
| WFTFCCID2.4GReport Part2 | Test Report | 2025-01-17 | PDF 2.6 MB |
| WFTFCCID5GReport Part1 | Test Report | 2025-01-17 | PDF 5.1 MB |
| WFTFCCID5GReport Part2 | Test Report | 2025-01-17 | PDF 4.8 MB |
| WFTFCCID5GReport Part3 | Test Report | 2025-01-17 | PDF 4.4 MB |
| WFTFCCIDBTReport Part1 | Test Report | 2025-01-17 | PDF 4.6 MB |
| WFTFCCIDBTReport Part2 | Test Report | 2025-01-17 | PDF 3 MB |
| 2.911 d 5 ii CertificiationApplicantv1.3 | Attestation Statements | 2025-01-17 | PDF 134.4 KB |
| 2.911 (d)(5)(i) Certification Equipment Type v1.2 | Attestation Statements | 2025-01-17 | PDF 143.7 KB |
| 2.911 (d)(5)(i)CertificationEquipmentTypev1.2 | Attestation Statements | 2025-01-17 | PDF 143.7 KB |
| 2.911 (d)(5)(ii) Certificiation Applicant v1.3 | Attestation Statements | 2025-01-17 | PDF 134.4 KB |
| 2.911 (d)(5)(ii)CertificiationApplicantv1.2 | Attestation Statements | 2025-01-17 | PDF 134.4 KB |
| 2.911 (d)(7) US Agent for Service of Process v1.4 | Attestation Statements | 2025-01-17 | PDF 76.6 KB |
| 2.911 (d)(7)USAgentforServiceofProcessv1.2 | Attestation Statements | 2025-01-17 | PDF 76.6 KB |
| 2.911_(d)(7) US Agent for Service of Process v1(1) | Attestation Statements | 2025-01-17 | PDF 76.6 KB |
| Agent Authorization Rev 1.0 | Cover Letter(s) | 2025-01-17 | PDF 14.9 KB |
| Agent Authorization Rev1.0 | Cover Letter(s) | 2025-01-17 | PDF 14.9 KB |
| FCC Long&shortTermOnlyConfidentialityRequestRev4.0 | Cover Letter(s) | 2025-01-17 | PDF 63.7 KB |
| FCC Model Difference Metadata only | Cover Letter(s) | 2025-01-17 | PDF 72.8 KB |
| FCC Modular Approval Request Rev 3.0 | Cover Letter(s) | 2025-01-17 | PDF 72.8 KB |
| FCC Short & Long Term Confidentiality Request Rev4.1 | Cover Letter(s) | 2025-01-17 | PDF 63.7 KB |
| FCC Software Configuration Control Declaration Rev1.1 | Cover Letter(s) | 2025-01-17 | PDF 61.8 KB |
| MPE | RF Exposure Info | 2025-01-17 | PDF 154 KB |
| Block Diagram Metadata only | Block Diagram | PDF 322.6 KB | |
| SCH Metadata only | Schematics | PDF 127.4 KB | |
| OP Metadata only | Operational Description | PDF 120 KB | |
| Software security operational description Metadata only | SDR Software/Security Info. | PDF 109.3 KB |
Application Information
| Application ID | uLsTy0tOUM0CRqB8ieItpg== |
|---|---|
| Final Action Date | 2025-01-17 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0029787975 |
| Model | ELRT8733BUT |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | WLAN 11a/b/g/n 1T1R + BT5.2 module |
| Responsible Party | Zilong Lai, yf.aggcs2@caixun.net.cn , +86-15776493370 |
| Technical Contact | EXPRESS LUCK INDUSTRIAL (SHENZHEN) LIMITED, yf.aggcs2@caixun.net.cn |
| Test Firm | Sally He, Shenzhen BCTC Testing Co., Ltd., andy.yuan@bctc-lab.com.cn  , 15999690624 |
| TCB Email | certification@micomlabs.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 03/02/2025 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Output power listed is maximum conducted power. This device contains 20 and 40 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| uLsTy0tOUM0CRqB8ieItpg== | 2025-01-17 | Original Equipment |
| iwYS8S033sXIsxBQ9JLBww== | 2025-01-17 | Original Equipment |
| i8o37biiS0R9L36ILMX55w== | 2025-01-17 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application uLsTy0tOUM0CRqB8ieItpg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 01/17/2025 Application Dated: 01/17/2025 |
| EXPRESS LUCK INDUSTRIAL (SHENZHEN) LIMITED |
| Floor1,Workshop1, NO.88, SOUTH BAOTONG ROAD,XIKENG |
| COMMUNITY, YUANSHAN STREET, LONGGANG DISTRICT, |
| Shenzhen, 518115 China |
| Attention: Zilong Lai |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AWY6-ELRT8733BUT |
| Name of Grantee: | EXPRESS LUCK INDUSTRIAL (SHENZHEN) LIMITED |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN 11a/b/g/n 1T1R + BT5.2 module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00478 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.0859 |
| Single Modular Approval. Output power listed is maximum conducted power. This device contains 20 and 40 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application uLsTy0tOUM0CRqB8ieItpg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
EXPRESS LUCK INDUSTRIAL (SHENZHEN) LIMITED Floor1,Workshop1, NO.88, SOUTH BAOTONG ROAD,XIKENG COMMUNITY, YUANSHAN STREET, LONGGANG DISTRICT, Shenzhen, 518115 China |
Date of Grant: 01/17/2025 Application Dated: 01/17/2025 |
| Attention: Zilong Lai |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AWY6-ELRT8733BUT |
| Name of Grantee: | EXPRESS LUCK INDUSTRIAL (SHENZHEN) LIMITED |
| Equipment Class: | Digital Transmission System |
| Notes: | WLAN 11a/b/g/n 1T1R + BT5.2 module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00478 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.0859 |
| Single Modular Approval. Output power listed is maximum conducted power. This device contains 20 and 40 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 01/17/2025 Application Dated: 01/17/2025 |
| EXPRESS LUCK INDUSTRIAL (SHENZHEN) LIMITED |
| Floor1,Workshop1, NO.88, SOUTH BAOTONG ROAD,XIKENG |
| COMMUNITY, YUANSHAN STREET, LONGGANG DISTRICT, |
| Shenzhen, 518115 China |
| Attention: Zilong Lai |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AWY6-ELRT8733BUT |
| Name of Grantee: | EXPRESS LUCK INDUSTRIAL (SHENZHEN) LIMITED |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN 11a/b/g/n 1T1R + BT5.2 module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.03548 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.03793 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.03724 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.03516 |
| Single Modular Approval. Output power listed is maximum conducted power. This device contains 20 and 40 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application iwYS8S033sXIsxBQ9JLBww==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
EXPRESS LUCK INDUSTRIAL (SHENZHEN) LIMITED Floor1,Workshop1, NO.88, SOUTH BAOTONG ROAD,XIKENG COMMUNITY, YUANSHAN STREET, LONGGANG DISTRICT, Shenzhen, 518115 China |
Date of Grant: 01/17/2025 Application Dated: 01/17/2025 |
| Attention: Zilong Lai |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AWY6-ELRT8733BUT |
| Name of Grantee: | EXPRESS LUCK INDUSTRIAL (SHENZHEN) LIMITED |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WLAN 11a/b/g/n 1T1R + BT5.2 module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.03548 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.03793 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.03724 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.03516 |
| Single Modular Approval. Output power listed is maximum conducted power. This device contains 20 and 40 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 01/17/2025 Application Dated: 01/17/2025 |
| EXPRESS LUCK INDUSTRIAL (SHENZHEN) LIMITED |
| Floor1,Workshop1, NO.88, SOUTH BAOTONG ROAD,XIKENG |
| COMMUNITY, YUANSHAN STREET, LONGGANG DISTRICT, |
| Shenzhen, 518115 China |
| Attention: Zilong Lai |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AWY6-ELRT8733BUT |
| Name of Grantee: | EXPRESS LUCK INDUSTRIAL (SHENZHEN) LIMITED |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | AN 11a/b/g/n 1T1R + BT5.2 module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00495 |
| Single Modular Approval. Output power listed is maximum conducted power. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application i8o37biiS0R9L36ILMX55w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
EXPRESS LUCK INDUSTRIAL (SHENZHEN) LIMITED Floor1,Workshop1, NO.88, SOUTH BAOTONG ROAD,XIKENG COMMUNITY, YUANSHAN STREET, LONGGANG DISTRICT, Shenzhen, 518115 China |
Date of Grant: 01/17/2025 Application Dated: 01/17/2025 |
| Attention: Zilong Lai |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AWY6-ELRT8733BUT |
| Name of Grantee: | EXPRESS LUCK INDUSTRIAL (SHENZHEN) LIMITED |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | AN 11a/b/g/n 1T1R + BT5.2 module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00495 |
| Single Modular Approval. Output power listed is maximum conducted power. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |